All Products

SKU: AF-5905 · MPN: ADA5905

The Adafruit Proto Under Plate PiCowbell is a single-slot prototyping base for the Raspberry Pi Pico or Pico W. It provides a reset button, a STEMMA QT / Qwiic connector, a prototyping grid, and double-row socket headers — all with no soldering required when used with a Pico H or Pico WH. The do...

SKU: AF-5967 · MPN: ADA5967

The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...

SKU: AF-6001 · MPN: ADA6001

The Adafruit Reversible USB Type A Plug Connector Breakout breaks out a reversible USB Type A plug to breadboard-friendly pins. The connector uses a thin centre contact so it can be plugged in either way — no more guessing which side is up. The connector is a hybrid through-hole and SMT design w...

SKU: AF-5631 · MPN: ADA5631

This break-apart panel gives you 12 PB86 step switch breakout PCBs, making these colourful sequencer-style switches much easier to use in a breadboard, perfboard or DIY synth build.The original switches are not breadboard or perfboard friendly, so these assembled breakouts save you from hand-wiri...

SKU: AF-3295 · MPN: 3295

Keep track of time even when your project loses power or gets reprogrammed. The PCF8523 Real Time Clock breakout is a battery-backed RTC that communicates over I2C and works with both 3.3 V and 5 V power and logic. Perfect for datalogging, clock building, time stamping, timers, and alarms. Works...

SKU: AF-4147 · MPN: 4147

Add motion and precision temperature sensing to any Feather board with this all-in-one sensor FeatherWing from Adafruit. It combines two high-quality Analog Devices sensors — the ADXL343 triple-axis accelerometer and the ADT7410 precision temperature sensor — on a single FeatherWing PCB. Both se...

SKU: AF-4277 · MPN: 4277

Everything you need to build a pocket-sized gaming handheld — no soldering required. This starter kit bundles the Adafruit PyGamer with a rechargeable battery, acrylic enclosure, speaker, button caps, and a zipper carry case. The PyGamer is powered by the ATSAMD51 (120 MHz ARM Cortex-M4) with 51...

SKU: AF-1518 · MPN: 1518

The Adafruit Flex Perma-Proto is a half-sized breadboard-layout prototyping board made from ultra-thin polyamide film. It bends, twists, and can even be cut to shape with scissors — perfect for wearables, curved enclosures, and projects where a rigid PCB simply will not fit. The flexible PCB fol...

SKU: AF-366 · MPN: 366

These 2 mm pitch 10-pin socket headers are designed specifically for XBee modules, which use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes two sockets — one for each side of the XBee module. Solder these sockets onto your PCB or breadboard adapter to create a ...

SKU: AF-3422 · MPN: 3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: AF-4022 · MPN: 4022

Measure invisible magnetic fields with the Adafruit Wide-Range Triple-axis Magnetometer, featuring the MLX90393 sensor. With 16-bit resolution across all three axes and a dynamic range of ±5 mT to ±50 mT, this sensor is ideal for detecting magnets and magnetic orientation rather than the Earth's ...

SKU: AF-3975 · MPN: 3975

Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...

SKU: AF-5695

The Adafruit NeoKey BFF adds a single mechanical key switch with RGB backlighting to any QT Py or Xiao board. Designed to solder or plug onto the back of your QT Py, it features a Kailh hot-swap socket for tool-free MX-compatible switch changes and a reverse-mount NeoPixel that shines up through ...

SKU: AF-123 · MPN: 123

A pre-programmed ATmega328P chip with the Adafruit 'ADAboot' bootloader, ready to drop into an Arduino Uno, Duemilanove, Diecimila, or NG board. Use it to replace a damaged chip or build your own Arduino-compatible project on a breadboard or custom PCB. The ADAboot bootloader is compatible with ...

SKU: AF-3954 · MPN: 3954

Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and LED driving — all over plain I2C, no NeoPixel pin management required. The boar...

SKU: AF-4372 · MPN: 4372

This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside four NeoTrellis RGB Dr...

SKU: AF-5745

The Adafruit PiCowbell DVI Output for Pico lets you drive an HDMI monitor or television directly from a Raspberry Pi Pico or Pico W. It features a mini HDMI connector and outputs DVI-compatible digital video — just plug in a standard mini-HDMI-to-HDMI cable and start displaying graphics. Note tha...

SKU: AF-5728

The Adafruit PiCowbell CAN Bus adds CAN bus connectivity to your Raspberry Pi Pico or Pico W, making it easy to interface with automotive, robotics, and industrial sensor networks. Built around the popular MCP2515 CAN controller and TJA1051/3 transceiver, it communicates over SPI and supports bot...

SKU: AF-1864 · MPN: 1864

This is a great connector for anyone doing RF work, when an SMA connector is required. It hugs the edge of a "half thickness" 0.031" thick PCB (or thinner!) and 'launches' off of the edge. We like these for their ease of soldering and low profile. Mates with any SMA plug, we also have an SMA to R...

SKU: AF-3345 · MPN: 3345

The Adafruit Metro Starter Pack is the perfect beginner kit for learning electronics and Arduino programming. Built around the Adafruit Metro 328 (ATmega328-based, Arduino UNO R3-compatible), this pack includes everything you need — except tools — to follow along with introductory tutorials and s...