All Products
Showing 61-80 of 100 products
Adafruit High Density NeoPixel UV LED Strip with 60 LED/m
The Adafruit High Density NeoPixel UV LED Strip packs 60 ultraviolet 5050-sized LEDs per metre onto a flexible PCB with weatherproof sheathing. Each LED contains three individual UV diodes controlled as a single NeoPixel, giving you addressable UV lighting that's compatible with any NeoPixel or W...
Raspberry Pi Zero W Basics Kit
The Raspberry Pi Zero W Basics Kit includes the Pi Zero W single-board computer along with essentials to get started. The Pi Zero W adds built-in WiFi and Bluetooth to the compact Pi Zero form factor, making it ideal for lightweight IoT projects, headless servers, and embedded applications. Key ...
SparkFun 6DoF IMU Breakout - BMI270 (Qwiic)
The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope with intelligent on-chip motion detection features optimised for wearable applicati...
pin:bit
pin:bit breaks out the useful pins from your micro:bit into a breadboard-friendly format, with clear labels to help keep your builds tidy and easy to follow.It is ideal for building small circuits on a breadboard and exploring components such as LEDs, buttons and analogue sensors. Just slot in yo...
Adafruit NeoPixel LED Strip w/ Alligator Clips - 30 LEDs/meter - 1 Meter - BLACK
·
A beginner-friendly NeoPixel strip with colour-coded alligator clips — no soldering or breadboard required. Simply clip onto your microcontroller and start glowing. The strip has 30 individually addressable RGB LEDs on a 1-metre black flex PCB with weatherproof sheathing. Uses SK6812 LEDs that w...
Adafruit NeoPixel LED Strip with 3-pin JST Connector - 1 meter - 30 LEDs / meter
·
A plug-and-play NeoPixel strip with a JST PH 3-pin connector for instant connection to STEMMA-compatible boards. The strip has 30 individually addressable RGB LEDs on a 1-metre black flex PCB — perfect for Hallowing, PyPortal, BrainCraft HAT, or any board with a 3-pin JST PH NeoPixel socket. Use...
WRTnode Standard Shield
This standard sheild for WRTnode is directly stackable with the WRTnode Mini OpenWRT Dev Board. WRTnode (A Mini OpenWRT Dev Board) uses a MTK MT7620N 580MHZ MIPS CPU, and is powerful in both interface and functionality. But expanding its interface with jumper wires is troublesome si...
NeoPixel FeatherWing - 4x8 RGB LED Add-on For All Feather Boards
·
The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...
Adafruit NeoPixel UV LED Strip with 32 LED/m - White PCB - 1M
·
Roll out the black light! The Adafruit NeoPixel UV LED Strip packs 32 individually addressable ultraviolet LEDs per metre onto a flexible white PCB with a weatherproof sheathing. Each LED package contains three UV diodes controlled via the standard NeoPixel (WS2812) protocol — just set all three ...
Adafruit PyRuler - Engineer Reference Ruler with CircuitPython
·
The Adafruit PyRuler is a PCB reference ruler and a fully functional CircuitPython microcontroller in one. Measuring approximately 25 × 150 mm (1" × 6"), this gold-plated FR4 ruler features common SMD component package outlines, a font size guide, trace-width diagram, and AWG wire gauge drill hol...
SparkFun Pro RF - LoRa, 915MHz (SAMD21)
The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to point data transmission in the 915MHz ISM band with LoRa Capabilities, the Pro RF is a great choice for...
GPIO Terminal Block Breakout Board Module for Raspberry Pi
This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...
Interface Cable for EM408 - 1 Foot
Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a 5-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
1.25mm Pitch 7-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
·
A slim, reliable 1.25 mm pitch cable with 7-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...
1.25mm Pitch 8-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
·
A slim, reliable 1.25 mm pitch cable with 8-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...
1.25mm Pitch 9-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
·
A slim, reliable 1.25 mm pitch cable with 9-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...
1.25mm Pitch 4-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
·
This 1.25 mm pitch 4-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wiring without excess slack. The friction-lock connectors provide a secure, click...
1.25mm Pitch 10-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
·
This 1.25 mm pitch 10-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wiring without excess slack. The friction-lock connectors provide a secure, clic...
1.25mm Pitch 2-pin Cable 20cm long 1:1 Cable
·
This 1.25 mm pitch 2-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wiring without excess slack. The friction-lock connectors provide a secure, click...
20-pin 0.5mm FFC / FPC Extender
·
A simple 20-pin FFC/FPC extender that lets you connect two 20-pin 0.5mm pitch flat cables end-to-end, extending the total cable length. Ideal when the included cable on a display, camera, or sensor module is too short for your enclosure or project layout. Key Features 20-Pin 0.5mm Pitch – Matc...
