All Products
Showing 61-80 of 100 products
Side-Light Flexible White LED Strip - 480 LEDs per meter - 1m
A 1-metre flexible LED strip with 480 cool white SMT LEDs per metre, arranged in a chip-on-board configuration and diffused with silicone epoxy. The result is a continuous, smooth light output that resembles neon tubing — without the need for transformers or glass. This is a side-light strip, me...
Gravity: Formaldehyde (HCHO) Sensor (Arduino Raspberry Pi Compatible)
The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in air. Through it, you can know the air quality. This sensor module is widely used ...
NeoPixel FeatherWing - 4x8 RGB LED Add-on For All Feather Boards
·
The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...
Gravity: Digital Blue LED Light Module
This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin is set to low. The reason for this is to prevent the LED from demanding too m...
Gravity: Digital Green LED Light Module
This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin is set to low. The reason for this is to prevent the LED from demanding too much ...
Joystick:bit v2 for micro:bit
Joystick:bit V2 is a JoyStick based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons as as classic JoyStick. At the same time, with the board buzzer and vibration motor, it also enhance game experience. Joystick:bit V2 can be remote control handle for micro:bit which on...
Adafruit BlueWhite 16x2 LCD+Keypad Kit for Raspberry Pi
·
The Adafruit Blue & White 16×2 LCD + Keypad Kit is a Raspberry Pi add-on plate that provides a 16×2 character LCD display, 5 navigation buttons, and backlight control — all using just the two I2C pins on the Pi. The I2C bus remains shareable with other sensors and devices. The 4 directional butt...
Miniware 4-Channel Mini Oscilloscope
This is a “5-track, 4-wave line” digital storage oscilloscope for general-purpose electronic engineering tasks and it is based on the ARM Cortex M3 core. The oscilloscope uses FPGA to manage the external ADC’s control and data cache mode. It provides 4 application partitions for loading and ...
Led Fairy Lights Copper Wire String 3M 30LEDs Colourful
Battery powered, safe and without external power input function.With flexible, easy to form and flexible copper wire, you can DIY the lamp into any shape you like. Low power consumption is the perfect accessory for decorative gift boxesSpecifications:Material: PVCCategory: light stringColor: C...
TIMI-96 Starter Kit
·
TIMI-96 is a breadboard-compatible display development module designed to make electronics testing, prototyping and education quicker and neater. It can be used stand-alone, driven by a host, tethered to a PC, or built into development projects.The module combines a 0.96” TFT LCD with a PIXXI-28 ...
Adafruit Soil Sensor Kit for micro:bit v2
·
This classroom-friendly kit pairs a micro:bit v2.2 with a simple soil sensor so students can monitor a pot plant and learn a bit of programming at the same time. It was designed to work with the "FarmBeats for Students" curriculum, where the micro:bit can show smile and frown status reports to in...
Thumb Slide Joystick
A compact resistive analog joystick similar to those found on the PSP1000. Unlike traditional thumbstick joysticks, this one has a distinctive flat "slide" feel with a removable rubber thumb pad. Connect to an Arduino's analog inputs to read X and Y axis positions, with an expected range of appr...
Adafruit PiTFT 2.4 HAT Mini Kit - 320x240 TFT Touchscreen
·
The Adafruit PiTFT 2.4" HAT Mini Kit is a compact colour touchscreen display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.4-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it's ideal for building interactive interfaces, mini consoles, or portabl...
Adafruit PiTFT 2.2 HAT Mini Kit - 320x240 2.2 TFT - No Touch
·
The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini console, desktop display, image viewer, or video player — all driven over the Pi's h...
Adafruit NeoPXL8 FeatherWing for Feather M0 - 8 x DMA NeoPixels!
·
Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing enables 8 concurrent DMA NeoPixel strands from a single Feather M0, with up to 250 pixels per strand (2,000 total) — all running in the background via hardware DMA so your code keeps executing. The wing hand...
TIMI-Click
TIMI-Click is a unique breadboard compatible display development module designed to provide development boards/modules which have a mikroBUS™ Click socket a simple to interface display solution. TIMI Click is aimed to speed up and reinvent the way electronic testing, development and projects are ...
TIMI-Click Starter Kit
TIMI-Click is a unique breadboard compatible display development module designed to provide development boards/modules which have a mikroBUS™ Click socket a simple to interface display solution. TIMI Click is aimed to speed up and reinvent the way electronic testing, development and projects are ...
Teensy 4.1 without Ethernet (Headers)
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
Teensy 4.1 without Ethernet
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
Double-Sided Cool White 6000K 12V LED Strip - 1m
·
This flexible LED strip is packed with cool white LEDs on both sides, giving you bright, clean illumination with close to 360-degree light output. The strip is only 6mm wide, making it easy to tuck into signage, props, architectural models, displays and other compact lighting builds.The LEDs are ...
