All Products

SKU: LB-00036

If you're looking for a wireless keyboard for your Raspberry Pi powered media centre? If the answer is 'yes' then this tiny wireless keyboard with integrated trackpad is perfect for you! This wireless keyboard and mouse connects to your Raspberry Pi wirelessly using a little RF dongle that conn...

SKU: AF-922

Add a miniature wireless controller to your computer project with this combination keyboard and touchpad. We found the smallest wireless USB keyboard available, a mere 6" x 2.4" x 0.5" (152mm x 59mm x 12.5mm)! It's small but usable to make a great accompaniment to a computer such as the Beagle...

SKU: AF-4667

The BL412 is a compact passive infrared (PIR) motion sensor designed for detecting movement from people and animals at distances of approximately 3–8 m. Much smaller than standard PIR modules, it is well suited for unobtrusive projects and fits easily on breadboards or perfboard. The sensor runs...

SKU: AF-4666

A compact passive infrared (PIR) motion sensor that detects movement from approximately 3–8 metres away. Much smaller than standard PIR modules, making it ideal for unobtrusive, space-constrained projects. Fully self-contained — just needs power, ground, and a resistor to set the delay time. Key...

SKU: PR-PIM169

The Mini Black HAT Hack3r is a compact breakout board that lets you access all 40 GPIO pins on your Raspberry Pi while a HAT or pHAT is attached. It connects between your Pi and the HAT via a ribbon cable, bringing every pin out to clearly labelled headers for probing, debugging, or connecting ad...

SKU: PR-PIM171

A handy breakout tool that lets you access all 40 GPIO pins while a HAT or pHAT is connected to your Raspberry Pi. Plug in your HAT, connect the ribbon cable to your Pi, and probe, debug, or extend any pin with ease. Key Features HAT & pHAT Landing Areas – Accepts both form factors with PCB st...

SKU: PR-PIM219

The Mini Black HAT Hack3r is a compact breakout board that gives you full access to all Raspberry Pi GPIO pins while a HAT or pHAT is attached. Ideal for debugging HAT projects, probing signals, or combining a HAT with other circuits on a breadboard. Every GPIO pin is clearly labelled with its f...

SKU: PR-PIM170

The Mini Black HAT Hack3r lets you access all GPIO pins while running a HAT or pHAT on your Raspberry Pi. Connect it via the included 40-pin ribbon cable to detach and debug your HAT projects, or combine a HAT with other circuits on a breadboard. Every GPIO pin is clearly labelled with its funct...

SKU: AF-3601

Sure, you have a keyboard. Maybe it's wireless. Maybe it's even Bluetooth. But do you have a mini Bluetooth keyboard? Like Halloween candy, this keyboard is fun-size! If Shakespeare had this wee chiclet keyboard back in the day, he definitely would've remarked, "And though it be...

SKU: EC-PBB05545T · MPN: PBB05545T

A compact, self-adhesive breadboard with 170 tie points in a tiny 45 × 35 mm form factor. Features an interlocking slot design so you can snap multiple boards together to expand your prototyping area as needed. Key Features 170 Tie Points – 2 × 17 rows of 5 interconnected pins, enough for sma...

SKU: DF-FIT0008

This compact 170-point mini breadboard is ideal for small prototyping tasks and fits neatly onto Arduino proto shields, enclosures, or project bases thanks to its strong self-adhesive backing. The solderless tie points accept standard jumper wires and component leads for quick circuit assembly. ...

SKU: DF-FIT0008-BK

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices of different colours. SPECIFICATION 170 tie point breadboard 17 x 5 x 2 points Adhesive backing Black

SKU: DF-FIT0008-BE

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices for different colors. SPECIFICATIONS 170 tie point breadboard 17 x 5 x 2 points Adhes...

SKU: DF-FIT0008-G

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices of different colors. SPECIFICATIONS 170 tie point breadboard 17 x 5 x 2 points Adhesi...

SKU: DF-FIT0008-R

A compact 170-point solderless breadboard with a self-adhesive backing for mounting to project enclosures, robot chassis, or proto shields. The red board measures 46 × 36 mm (1.8 × 1.4″) and is compatible with the Arduino Proto Shield. Key Features 170 Tie Points – 17 × 5 × 2 point layout Sel...

SKU: AF-1736

Add a good quality, slim keyboard to your Raspberry Pi, Beagle Bone Black or other mini-computer with this sleek black chiclet keyboard. It's a full QWERTY keyboard with a USB cable and is compatible with all operating systems. We tried many keyboards to find one that felt good for every-day u...

SKU: AF-4475

A complete kit for building a network-wide ad blocker using Pi-hole on a Raspberry Pi Zero WH. Pi-hole acts as a DNS server on your network — when a device requests an ad server address, Pi-hole returns nothing, blocking the ad before it even loads. Works with computers, tablets, and phones, even...

SKU: LB-PT7011

Specification: Product Name:DC Geared Motor Product Model: N20 Product Material: metal Main colour: silver tone Length: approx.36mm Rated Voltage:DC 12V Output Speed:200RPM Shaft Size:3 x 10mm/ 0.12" x 0.4"(D*L) Product Weight:10g Features: It is made of durable hard metal materials, Small in siz...

SKU: DF-DFR0799

This mini Bluetooth Amplifier can be connected to your mobile phone, Raspberry Pi, and other main-boards with Bluetooth to DIY your unique speaker! With standard audio quality, the cost-effective amplifier offers 50W output power, volume adjustable knob, Bluetooth 5.0 input, and dual-channel outp...

SKU: AF-2438

With this handy 7 Pin Mini-DIN Connector you can now jack into the hackport on your iRobot and control it with an Arduino or some other favorite microcontroller that has a 5V TTL UART! You can also power your project off of the internal Create 2's battery. Note that the battery voltage ca...