All Products

SKU: DF-FIT0630

A 30-pin FPC cable designed specifically for connecting the LattePanda Alpha and Delta single-board computers to their 7-inch eDP display. The ultra-thin, flexible design with interference shielding ensures reliable video signal transmission in compact builds. Key Features LattePanda Compatibl...

SKU: TB-TS1536

A 30W soldering iron powered from a 12V DC source via a fused cigarette lighter plug. Designed for automotive and field soldering where mains power isn't available — simply plug into your vehicle's 12V socket. Includes a metal sheet solder stand. Key Features 12V DC Powered – Fused cigarette l...

SKU: EC-WRF31501R

A basic 315MHz RF link kit consisting of a transmitter and receiver module pair. Commonly used for simple wireless remote control, data transmission, and sensor communication between microcontrollers. Works well with the Arduino VirtualWire library for easy integration. The transmitter accepts 3...

SKU: EC-WRF315KIT

A simple 315MHz wireless controller kit consisting of a 4-button RF keyfob remote and a matching receiver module. No programming or microcontroller is required — power the receiver with 5V DC and press a button on the keyfob to activate the corresponding output pin. Uses SC2273-L4 and SC2272-M4 ...

SKU: LB-32G-MICROSD

A 32GB Class 10 microSD card pre-loaded with the latest Raspberry Pi OS, ready to boot on any Raspberry Pi model including the Raspberry Pi 5. Simply insert the card, power on your Pi, and you're up and running — no manual OS installation required. These microSD cards are tested by the Raspberry...

SKU: LB-32G-NOOBS

A Transcend 32GB Class 10 microSD card pre-loaded with the official Raspberry Pi NOOBS (New Out of Box Software) installer. NOOBS provides a simple menu-driven interface to choose and install your preferred Raspberry Pi operating system on first boot. Includes a full-size SD card adapter. Key Fe...

SKU: SF-COM-28380 · MPN: COM-28380

Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...

SKU: AF-5828 · MPN: ADA5828

This rectangular TFT module is for projects that can drive a high-pixel-count RGB TTL display directly. It provides 320x820 pixels with RGB666 16-bit full-colour output on an IPS panel, so colours stay clear at wide viewing angles.It uses an ST7701S TFT driver. SPI is used only to configure the d...

SKU: WS-20755

A compact 3.2" IPS LCD display with an HDMI input, delivering 480×800 resolution with wide 160° viewing angles and adjustable backlight brightness. Driver-free on most platforms — simply connect via HDMI and power via USB. Compatible with all Raspberry Pi models, NVIDIA Jetson Nano, and Windows ...

SKU: AF-4278

A 3.2" TFT LCD display module with a built-in resistive touchscreen. The 320×240 pixel screen is driven by the ILI9341 chipset and supports SPI, 8-bit parallel, and 16-bit parallel interfaces. This is the bare display module only — no PCB or breakout board is included. A 50-pin, 0.5 mm pitch, to...

SKU: AF-1743

A large 3.2" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 240×320 pixel display is driven by the ILI9341 chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: EC-AMC01219U

An all-in-one development board combining an ATmega32U4 microcontroller with an A9G GPRS/GSM/GPS module. Capable of making voice calls, sending SMS text messages, and providing GPS positioning — all controllable via AT commands over serial. The board includes analogue, I2C, and digital expansion ...

SKU: DF-DFR0471

A 32×16 full-colour RGB LED matrix panel with 512 individually addressable pixels at 6mm pitch. Each LED can display any colour, making this panel suitable for text, animations, and graphics. The high-brightness LEDs and wide 160° viewing angle work well for both indoor and outdoor installations....

SKU: DF-DFR0472

A 32×32 full-colour RGB LED matrix panel with 1024 individually addressable pixels at 4mm pitch. Each LED can display any colour, making this panel suitable for text, animations, and graphics. The high-brightness LEDs and wide 160° viewing angle work well for both indoor and outdoor installations...

SKU: AF-607

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 4mm pitch, measuring approximately 5 inches (128mm) square. These panels are commonly used in video walls and signage, delivering bright, vivid colours with good white balance uniformity. On the back, dual IDC connectors (input and output...

SKU: AF-2026

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 5mm pitch. Designed for indoor use with a wide 160° viewing angle and pre-balanced white output, these panels look great in ambient light. The slightly larger pitch than 4mm panels makes them well-suited for displays viewed at moderate di...

SKU: AF-1484

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 6mm pitch. The larger pitch provides good visibility at greater distances, making it suitable for signage and larger-scale displays. Pre-balanced white output and a 1:16 scan rate with 12 × 16-bit latches handle the display multiplexing. ...

SKU: TB-RR0632

A pack of eight 330kΩ metal film resistors rated at 0.5W (½W) with 1% tolerance. These through-hole axial resistors are the same physical size as standard ¼W carbon film types, making them a drop-in upgrade where higher power handling is needed. Specifications Resistance – 330kΩ Tolerance – 1...

SKU: SF-COM-18270 · MPN: COM-18270

This surface-mount resistor provides a 330 Ohm value in a compact SMD format for PCB assembly, repairs, prototyping and small electronics builds.It is a thick film resistor with 1/10W rated power and ±1% tolerance. The part is sold as a single resistor, making it handy when you only need a few sp...

SKU: SF-COM-30221 · MPN: COM-30221

This isolated resistor network packages eight individual 330 Ohm resistors into one compact 16-pin, 2506 surface-mount component.Each resistor element is rated for 63mW with a ±5% tolerance, making the array useful for designs that need several matching pull-up, pull-down, or line-terminating res...