All Products

SKU: SF-DEV-20359

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...

SKU: AF-420 · MPN: 420

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate using 12 digital pins and a 5V supply. These panels are designed for high-speed pr...

SKU: AF-358 · MPN: 358

A compact and colourful 1.8" TFT LCD breakout with a built-in microSD card slot, perfect for adding a bright display to any microcontroller project. It communicates over 4-wire SPI and includes its own pixel-addressable frame buffer, so it works with virtually any microcontroller — even those wit...

SKU: AF-5233 · MPN: 5233

The Adafruit ATtiny817 Breakout with seesaw is a compact development board that combines an ATtiny817 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmware, it acts as an I2C-controlled co-processor — adding GPIO, ADC, PWM, and NeoP...

SKU: RB-BLENANO

The BLE Nano is the smallest Bluetooth 4.0 Low Energy development board available, measuring just 18.5 × 21.0 mm. Built around the Nordic nRF51822 SoC (ARM Cortex-M0 + BLE), it runs at 16 MHz with ultra-low power consumption and supports both BLE Central and Peripheral roles. The included MK20 U...

SKU: AF-1045 · MPN: 1045

This compact 8×8 yellow-green LED matrix packs 64 ultra-bright LEDs into a 1.2" square footprint. With 0.1"-spaced pins on each side, it plugs directly into a breadboard — one row per side — making it easy to prototype scrolling signs, animations, and small displays without any additional hardwar...

SKU: AF-5772

Add a small, colourful display to any QT Py or Xiao project with the EYESPI BFF. This compact add-on board connects to EYESPI-compatible displays via an 18-pin 0.5mm pitch FPC connector, giving you a standardised way to wire up SPI displays without a mess of jumper wires. The EYESPI standard is ...

SKU: RB-REDBEARDUO

The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your idea. Powered by an STM32F205 ARM Cortex-M3 at 120 MHz with Broadcom BCM43438 wir...

SKU: EC-WCW32110W

The ESP-WROOM-32 is Espressif's powerful Wi-Fi, Bluetooth Classic, and BLE module built around the ESP32 dual-core processor. It's a versatile platform for IoT applications ranging from low-power sensor networks to demanding tasks like voice encoding, music streaming, and MP3 decoding. This is t...

SKU: AF-5302 · MPN: 5302

The Adafruit KB2040 is an RP2040-powered board designed specifically for mechanical keyboard builds, in the Arduino Pro Micro form factor. With castellated pads, USB-C, 8 MB of Flash, and a STEMMA QT / Qwiic connector, it's a drop-in replacement for Pro Micro boards with significantly more power ...

SKU: LB-LR0149

The EasyDriver is a simple stepper motor driver board based on the Allegro A3967 IC. It accepts a digital step/direction input (3.3 V or 5 V logic) and drives bi-polar stepper motors (4, 6, or 8 wire) at any voltage within the 7–30 V supply range. The board features adjustable current control fr...

SKU: SF-DEV-28369 · MPN: DEV-28369

This lockable Teensy 4.1 is aimed at advanced developers moving from prototype to a secure production design. It keeps the high-performance 600 MHz ARM Cortex-M7 platform of the Teensy 4.1 while adding write access to the chip’s eFuses so your final application can be encrypted and locked to the ...

SKU: SF-DEV-28370 · MPN: DEV-28370

This lockable Teensy 4.1 variant combines the high-performance Teensy 4.1 platform with production-focused code security, while omitting the Ethernet PHY for projects that do not need wired networking. It is built around the NXP MIMXRT1062DVJ6B ARM Cortex-M7 processor running at 600 MHz, with 8 M...

SKU: SF-LCD-15143

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia files while keeping the pin count low. The breakout accepts both 5 V and 3.3 V po...

SKU: PI-A000053

The Arduino Micro is the smallest board in the Arduino family, based on the ATmega32U4 with built-in USB. Its compact breadboard-friendly form factor makes it easy to integrate into everyday objects and interactive projects. Like the Leonardo, it can emulate a keyboard, mouse, or other USB HID de...

SKU: PI-A000005

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x).It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard ...

SKU: PR-ABX00023

Want to add a WiFi interface to your devices? Get the MKR WIFI 1010. It connects easily to other Arduino products and is configurable using Arduino software — and you don’t need to be a network expert. This is the newest version of the MKR 1000 WIFI, but with an ESP32 module on board made by U-BL...

SKU: SF-KIT-19935

The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikroBUS™ Carrier Board and the SparkFun MicroMod STM32 Processor but you will also r...

SKU: DF-DFR0316

A 4-channel, 18-bit delta-sigma analogue-to-digital converter (ADC) module based on the Microchip MCP3424. This module adds high-accuracy analogue input capability to Raspberry Pi, Arduino, and other microcontroller platforms over I2C. The onboard programmable gain amplifier (PGA) allows the mod...

SKU: AF-1378 · MPN: 1378

The WS2811 is the driver IC used in NeoPixel LED strips and pixels. In this SOIC-8 package, it lets you build your own addressable RGB LEDs by driving a single common-anode RGB LED or three individual single-colour LEDs. Each output provides ~18 mA constant current, ensuring consistent colour reg...