All Products

SKU: AF-6054 · MPN: ADA6054

The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape needed — the mount snaps directly onto brick baseplates for a clean, secure build. ...

SKU: AF-6130 · MPN: ADA6130

The Adafruit Feather RP2350 with HSTX Port and 8 MB PSRAM is the upgraded variant of the Feather RP2350, featuring a pre-soldered AP6404L 8 MB PSRAM chip for managing large data buffers, display framebuffers, and memory-intensive applications directly in mappable RAM. Combined with dual Cortex-M3...

SKU: AF-6241 · MPN: ADA6241

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer lines or surface imperfections. No screws or glue required — simply snap the Fe...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-3191

The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 120 VAC or 5A at 240 VAC (resistive loads), it can handle up to 1,200 watts. The...

SKU: AF-3200

The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...

SKU: AF-3173

A simple, solder-on terminal block set sized to fit Adafruit Feather boards and FeatherWings. These 0.1″ pitch terminal blocks let you make secure, screw-down wire connections without soldering wires directly to your board — making projects easier to build, maintain, and modify. Compatible with ...

SKU: AF-3090

Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just two I2C pins. Works with any Adafruit Feather board. The FeatherWing is perfect f...

SKU: AF-3088

The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two shared pins — leaving all other GPIO free for sensors, buttons, and additional disp...

SKU: AF-2922

Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...

SKU: AF-2945

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...

SKU: AF-2680

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, ...

SKU: AF-2928

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...

SKU: AF-3591

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-3651

The Adafruit TFT FeatherWing is a 3.5" colour display with a 480×320 resolution, bright 6-LED white backlight, and a built-in resistive touchscreen. It plugs directly into any Adafruit Feather board, giving you a high-resolution colour display with touch input and a microSD card slot for image st...

SKU: AF-3343

The Adafruit CRICKIT FeatherWing is a robotics and electronics driver board that plugs into any Feather mainboard. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit seesaw co-processor, so it only uses t...

SKU: AF-3106

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in blue. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall blue 7-segment display with decimal points and a centre colon for clock displays. ...

SKU: AF-3108

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in red. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall red 7-segment display with decimal points and a centre colon for clock displays. Th...

SKU: AF-3109

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in white. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall white 7-segment display with decimal points and a centre colon for clock displays....