All Products

SKU: DF-DFR0051

The Analog Voltage Divider V2 can detect the supply voltage from 0.0245V to 25V. This module is based on resistor divider principle. The voltage detection module allows the input voltage to reduce 5 times. As the Arduino analog input voltage is normally maximum 5V, the input voltage of analog ...

SKU: DF-DFR0565

Gravity: Digital Signal Isolator is capable of isolating I2C digital signal and providing isolated power to the sensor module, effectively preventing mutual interference between the sensor modules. This digital signal isolator can be used for multi-parameter water quality detection systems to pre...

SKU: DF-DFR0576

The Gravity I2C Multiplexer solves address conflicts when you need to connect multiple I²C devices that share the same fixed address. It provides eight independent I²C ports on a single bus, allowing up to eight identical-address sensors or modules to communicate without conflict. The default I²...

SKU: PI-LNG001

An open source, programmable, Arduino-compatible USB infrared receiver that gives new life to old remote controls. IRduino is a peripheral device that allows almost any IR signal to be translated into commands. It works on many platforms, including PC, Mac, Raspberry Pi, and even some cell pho...

SKU: LB-LR0024

The rotary encoder is an electro-mechanical switch. Its output signal can be used to determine the direction that its knob is being rotated. Not only that, but it is also capable of continuous rotation, unlike a regular potentiometer.

SKU: M5-U026

The M5Stack 16-Key Capacitive Touch Unit is a Makey Makey-inspired input device built around an ATmega328P microcontroller. It detects capacitive touch across 16 key pads, allowing you to turn everyday objects — fruit, foil, water, or anything conductive — into touch-sensitive buttons. A built-in...

SKU: EF-EF04040

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connectio...

SKU: DF-KIT0138

IoT Starter Kit is an all-in-one bundle for micro:bit beginners to fast experience and build Internet of Things projects.The kit comes with a micro:bit microcontroller, a Wi-Fi module and 7 sensors/actuators that are wildly used in real-life IoT applications.You can easily setup the Wi-Fi connect...

SKU: FT-HUMID

Measure temperature and relative humidity with this simple, Arduino-compatible sensor module based on the DHT22. With just three connections (GND, power, and data), you can read both temperature and humidity from a single I/O pin on your microcontroller. An Arduino library is available to make in...

SKU: FT-ASPM

The ArduSat Prototyping Module is a gold-plated PCB used to hand-assemble early prototypes of the first two ArduSat satellites launched into space in 2013. A limited number remain from that original production run — own a piece of Arduino and space history. Build a custom CubeSat satellite modul...

SKU: EF-EF04088

The Octopus 2 Channel Tracking Module uses two pairs of reflective infrared diodes to detect black lines on a surface. Designed for line-following smart cars, it lets you create custom black track layouts and program your vehicle to follow them. The module features two GVS connectors for easy wi...

SKU: LB-OWL-IR

An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to build a universal remote control system. Key Features IR Signal Reception – Rea...

SKU: LB-LR20

This kit brings together a wide range of sensor and interface modules for Arduino projects, experiments and classroom learning. It includes input sensors, output modules, switching modules, power modules and useful building blocks for trying common electronics ideas.Use the modules to explore lig...

SKU: LB-LR0240

This compact sound module lets a microcontroller detect the presence of loud sounds using its onboard microphone.It is designed for sound detection rather than audio recording or interpretation. An Arduino can read the module to respond to noise events, but it cannot directly interpret or record ...

SKU: DF-SEN0138-L

A compact crash sensor (left-side variant) based on a miniature snap-action micro switch with roller lever. Designed for Arduino and compatible microcontrollers, this sensor module includes an onboard pull-up resistor and status indicator LED for easy testing and integration. The roller lever des...

SKU: YH-6000200061

The Yahboom 4WD Smart Robot is a fully featured Arduino-based robotics kit built around the Arduino UNO R3 controller. The aluminium alloy chassis with four-wheel drive and metal motor brackets provides a sturdy platform for learning robotics, sensor integration, and programming. Most components...

SKU: DF-DFR1129 · MPN: DFR1129

##Introduction The Gravity: Photo Interrupter Module integrates a high-performance ITR9608 photoelectric switch. Its compact design and easy operation make it an ideal choice for electronic projects and applications. Whether for robotics, automation equipment, or counting systems, this module pro...

SKU: EF-EF04016

Octopus Non-invasive AC current sensor (TA17-03) Brick is Electronic building blocks, a transformer, an ammeter, a current sensor module, compatible with all kinds of Arduino electronic building blocks / sensor shield. 3P electronic building blocks interface, input 5V - GND, S pin for output a...

SKU: SF-PRT-09389

Premium female-to-female jumper wires for connecting between male headers on breadboards, Arduinos, Raspberry Pis, and other 0.1″ (2.54 mm) pitch prototyping boards. Each wire is 30 cm (12″) long, providing plenty of reach for typical bench setups. Multiple wires can be connected side by side on...

SKU: AF-1950

Premium female-to-female jumper wires in a convenient 20-pin ribbon cable, perfect for making wire harnesses or jumpering between headers on PCBs. Each wire is 150mm (6") long with 0.1" (2.54mm) female header contacts on both ends, fitting cleanly onto standard-pitch headers. The ribbon strip in...