All Products

SKU: SF-COM-10439

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up white! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA. They don’t easily fit into a breadboard, but check below fo...

SKU: TB-AA0274

With this basic but essential tool it is possible to check the function, brightness, colour and polarity of most kinds of light emitting diodes (LED). The LED to be tested plugs into the front panel, at the current you wish to test it with. Two 10 mA positions have been included on this multi-L...

SKU: LB-LS0538

A cute little module that allows you to turn on and off the Red, Yellow and Green lights and 'control traffic'

SKU: SF-COM-08662

This is a simple 5mm LED with an interesting array of applications. This UV LED can be used for counterfeit detection (bills, credit cards, documents, etc), sterilization, pesticide, black lights, sun burns, the list goes on. Please wear eye protection when using these LEDs.Features: T1 ¾ 5mm cle...

SKU: PI-COM0612

This is a simple 5mm LED with an interesting array of applications. This UV LED can be used for counterfeit detection (bills, credit cards, documents, etc), sterilization, pesticide, black lights, sun burns, the list goes on.Please wear eye protection when using these LEDs.Features: 5mm colourles...

SKU: DF-DFR0130-B

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading straight away. Easy to use, and is a good company with robotic applications. Th...

SKU: DF-DFR0130-G

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading straight away. Easy to use, and is a good company with robotic applications. Th...

SKU: DF-DFR0130-R

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading straight away. Easy to use, and is a good company with robotic applications. Th...

SKU: SF-COM-14561

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 yellow 5mm LEDs will help alleviate any frustrations you’ve had with accidentally burning them out by having a resistor in the diode itself. Each LED has an operating voltage rang...

SKU: AF-4990

If you're unfamiliar with mecanum wheels, this Matching Left & Right pack of 48mm Diameter Mecanum Wheels may resemble everyday chunky wheels Frankenstein'd out of mini hair curler rollers. In reality, they are very cool, omnidirectional wheels with rollers that...

SKU: M5-A030-B

Description LEGO Cable is used for LEGO motor which is compatible with BALA and M5Module LEGO+. We have prepared different length to fit your needs on different appliactions. Product Features 3 specifications: 10cm, 20cm, 30cm

SKU: M5-A030-C

Description LEGO Cable is used for LEGO motor which is compatible with BALA and M5Module LEGO+. We have prepared different length to fit your needs on different appliactions. Product Features 3 specifications: 10cm, 20cm, 30cm

SKU: AF-3815

But what do you do when you want to add LEGO-compatible bricks and parts to your robotics project? This is the bracket you need! Just push onto the body of your DC Gearbox "TT" motor, secure with screws, and it's ready to adapt to the standard LEGO-compatible parts. So easy, we think this...

SKU: MTA-LEG45544-5

A classroom bundle of five LEGO Education EV3 Core Sets (45544), providing enough equipment for 10 students working in pairs. Each set includes the EV3 programmable brick, motors, sensors, and over 540 LEGO Technic elements for building a wide range of robots and mechanisms. The EV3 platform sup...

SKU: AF-3518

This nifty little plastic tool provides you a super simple, super cheap means for adjusting the lens of your Raspberry Pi camera! Simply place the little hole opening snugly over the camera lens – it should set nicely with no need to force. Then turn like a dial to the left or right and a...

SKU: PR-COM-B018

Removes dust and dirt from your HQ camera lens with a gentle breeze!The Raspberry Pi High Quality Camera is capable of taking some truly gorgeous pictures, but even our range of lovely lenses won't work at their best when they're dusty.Sure, you could clean them on your sleeve...

SKU: SF-DEV-16260

The Leopard Imaging Camera is a wide-angle camera module designed specifically for the NVIDIA Jetson Nano Developer Kit. With a 136° field of view, Sony IMX219 8.08 MP colour sensor, and CSI-2 MIPI 2-lane interface, it's well suited for machine vision, robotics, and computer vision applications. ...

SKU: SF-PRT-17599

This hardware kit consists of 4 each of M2 style nylon hex nuts and screws. It is designed for use with the Leopard Imaging Camera, but can be used for other mountings as well.This hardware set is identical to what is included in our JetBot kit options.

SKU: SF-GPS-26620 · MPN: GPS-26620

Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...

SKU: AF-1751

This 9.7" IPS TFT display module is the same ultra-high pixel density retina panel found in iPad 3 and 4 tablets. With a 2048×1536 resolution, it delivers incredibly sharp visuals for custom monitor builds and embedded display projects. This listing is for the bare display panel only — no driver...