Little Bird
LDR Photoresistor
This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set t...
Get notified when back in stock
This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of around 10KΩ.
Specification:
Maximum voltage: 150V, DC
Maximum wattage: 90mW
Operating temperature: -30°C ~ 70°C
Spectral peak: 540nm
Bright resistance (10Lux) (KΩ): 5 - 10
Dark resistance: 0.5 MΩ
100λ10: 0.5
Response time: 20ms (Rise), 30ms (Down)
Resistance illumination: 2
Jargon buster
Plain-language definitions for the technical terms used above.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- photocell
- A light-sensitive component whose electrical resistance changes with the amount of light falling on it. It matters when choosing or using light sensors, automatic lights, or brightness-detecting circuits because its response speed, resistance range, and sensitivity affect how reliably it detects light levels.
Find this product in
Sensors & Input
Related Tutorials
Free guides on learn.littlebird.com.au
