All Products

SKU: SF-WRL-00145

A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee, or other 2.4 GHz RF modules. Key Features 2.2 dBi Gain – Omni-directional co...

SKU: SF-WRL-00558

A large 2.4 GHz rubber duck antenna with 5 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 196 mm (7.7″) long, it provides significantly more range than smaller duck antennas — ideal when you need to push your wireless link further. Key Features 5 dBi Gain – Higher gain for extended...

SKU: DF-SEN0306

A K-band 24GHz millimetre-wave ranging radar sensor with isolated transmitter and receiver antennas. Using FMCW modulation, it measures distance to object surfaces by transmitting and receiving microwaves, with all signal processing integrated on-board. Distance data is output directly via an asy...

SKU: AF-2308

A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connector snaps directly onto boards without the need for an adapter. Key Features ...

SKU: SF-COM-00690

The Nordic Semiconductor nRF24L01+ is a 2.4 GHz transceiver IC with an enhanced feature set over the original nRF24L01, including improved range, auto-acknowledge, auto-retransmit, and six data pipes (Multiceiver). It operates on a 1.9–3.6 V supply with 5 V tolerant input pins, making it straight...

SKU: EC-ACS44240D

A 2.4″ colour TFT LCD touch shield from Elecrow that plugs directly onto an Arduino Uno or Mega. The ILI9341-driven display delivers 240 × 320 resolution with 18-bit colour (262,000 shades), and includes a 4-wire resistive touchscreen, microSD card slot, and reset switch. Key Features 240 × 32...

SKU: AF-4524

This 24-pin FFC/FPC extender lets you connect two 24-pin 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. A simple solution when your existing cable isn't long enough to reach. Key Features 24-Pin, 0.5mm Pitch – Matches standard 24-pin FFC/FPC cables End-to-End E...

SKU: AF-4230

A 24-pin 0.5mm pitch FPC extension cable, 25cm long, designed for mounting eInk and ePaper displays at a distance from the driver board. Use this cable when you need to position your display remotely — for example, in a case, frame, or enclosure separate from the main electronics. Simply pry ope...

SKU: PL-3450

A compact 6V brushed DC gearmotor with a 25:1 metal spur gearbox, delivering strong torque in a small form factor. The cylindrical design has a 20mm diameter, and the D-shaped output shaft is 4mm in diameter extending 18mm from the gearbox face plate. Key Features 25:1 Metal Gearbox – Durable ...

SKU: PL-3712

A compact 6V brushed DC gearmotor with long-life carbon brushes and a 25:1 metal spur gearbox. This version includes an extended 6 × 2mm motor shaft at the rear, useful for attaching encoder wheels or other feedback mechanisms. The cylindrical body has a 20mm diameter, and the D-shaped output sh...

SKU: AF-4941

A 10-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping individual jumper wires together. These connectors are sometimes referred to as "...

SKU: AF-4942

A 12-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping individual jumper wires together. These connectors are sometimes referred to as "...

SKU: AF-4943

A 14-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping individual jumper wires together. These connectors are sometimes referred to as "...

SKU: AF-4944

A 16-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping individual jumper wires together. These connectors are sometimes referred to as "...

SKU: AF-4945

An 18-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping individual jumper wires together. These connectors are sometimes referred to as ...

SKU: AF-4946

A 20-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping individual jumper wires together. These connectors are sometimes referred to as "...

SKU: AF-4934

A 2-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loose individual jumper wires. These connectors are sometimes referred to as "Berg"...

SKU: AF-4935

A 3-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loose individual jumper wires. These connectors are sometimes referred to as "Berg"...

SKU: AF-4936

A 4-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loose individual jumper wires. These connectors are sometimes referred to as "Berg"...

SKU: AF-4937

A 5-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loose individual jumper wires. These connectors are sometimes referred to as "Berg"...