All Products

SKU: SF-DEV-16789

The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND, 3.3V, SDA and SCL) on your Arduino Nano to four SparkFun Qwiic connectors (two horizontally and two ...

SKU: SF-SEN-16295

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction). As a result, the MCP9600 ...

SKU: SF-BOB-16784

The SparkFun Qwiic Mux Breakout uses the TCA9548A to provide 8 independent I2C channels, solving the common problem of multiple sensors sharing the same address. Simply route each device to its own channel and communicate with all of them on a single bus. With 8 configurable addresses (via solde...

SKU: SF-SEN-16294

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction). As a result, the MCP9600 ...

SKU: SF-BOB-16842

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an easy to use I2C device! Utilizing our Qwiic Con...

SKU: SF-SEN-16476

The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's MPR Series piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a wide pressure sensing range of 60mbar to 2.5bar, easy to read 24 bit digital I2C output, and can be calibrated and compen...

SKU: SF-DEV-17119

The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teensy 3.2, and Teensy LC footprints. The shield connects GND, 3.3V, SDA, and SCL f...

SKU: SF-DEV-17047

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the included library — functions mirror familiar pinMode and digitalWrite calls. All...

SKU: SF-COM-16810

The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows users to switch two AC loads from a low power microcontroller using the SparkFun Qwiic connect system. The board features two 25A/250VAC solid state relays that utilize the Zero Cross Trigger method so you can toggle ...

SKU: SF-DEV-17156

An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...

SKU: SF-DEV-17512

The SparkFun Qwiic pHAT Extension for Raspberry Pi 400 provides access to the Pi 400's GPIO header while adding Qwiic I2C connectivity. The board connects via a 2×20 right-angle header and extends out to the edge of the PCB, allowing you to stack HATs right-side up or connect Qwiic-enabled I2C de...

SKU: SF-COM-18354

The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C. Write to individual LEDs to display a count in binary, or write to the whole strip for cool lighting effects. You can even add more LEDs to the end if you need to. We’ve writ...

SKU: SF-COM-18355

The SparkFun Qwiic EEPROM Breakout is a simple and cost effective option to add some extra storage space to any project. With 512 kilo-bits (or 64 kilo-bytes) of storage, this product is great for any microcontroller that doesn't have any EEPROM storage space, like the SAMD21. You can use the Qwi...

SKU: SF-SEN-18642

The SparkFun Qwiic ToF Imager is a state of the art, 64 pixel Time-of-Flight (ToF) 4 meter ranging sensor built around the VL53L5CX from ST. This chip integrates a SPAD array, physical infrared filters, and diffractive optical elements (DOE) to achieve the best ranging performance in various ambi...

SKU: SF-KIT-18624

We are quite familiar with seven-segment displays. We see them on our alarm clocks, ovens, and microwaves. By adding more segments to each digit you can display more than just numbers! These fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, si...

SKU: SF-WRL-18567

Ultra. Low. Power. Arguably the best three words in the IoT world. SparkFun has teamed up with ARM and Dialog to provide you with this Qwiic WiFi Shield based around the DA16200 module. The DA16200 is a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC clock, RF Lumped R...

SKU: SF-COM-18566

We are quite familiar with seven-segment displays. We see them on our alarm clocks, ovens, and microwaves. By adding more segments to each digit you can display more than just numbers! Introducing the brand new SparkFun Qwiic Alphanumeric Display. These green fourteen-segment digits allow you to ...

SKU: SF-COM-16918

We are quite familiar with seven-segment displays. We see them on our alarm clocks, ovens, and microwaves. By adding more segments to each digit you can display more than just numbers! Introducing the brand new SparkFun Qwiic Alphanumeric Display. These purple fourteen-segment digits allow you di...

SKU: SF-BOB-16445

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. This breakout board for the micro:bit’s edge connector allows int...

SKU: SF-BOB-16446

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. We've already attached headers to this version of the board so you d...