All Products

SKU: SF-WIG-09555

This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a footprint which mates directly to our FTDI Basic or a Bluetooth Mate. The DB9 conn...

SKU: SF-DEV-09709

A compact prototyping shield designed specifically for the Arduino Pro Mini. When your project needs just a bit more space for external circuitry, this shield adds 38 unconnected plated through-holes (PTHs) in a form factor that matches the Pro Mini. The shield connects to the top four pins on e...

SKU: AF-813

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for t...

SKU: AF-812

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for t...

SKU: AF-811

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for t...

SKU: AF-1982

The Adafruit MPR121 Capacitive Touch Sensor Breakout provides 12 channels of capacitive touch sensing over I2C. The MPR121 handles all the capacitive filtering internally and can be configured for varying sensitivity levels, making it far easier to use than raw analog capacitive sensing. With fo...

SKU: AF-1980

The Adafruit TSL2591 is an ultra-high-range digital light sensor with a massive 600,000,000:1 dynamic range. It features both infrared and full-spectrum photodiodes, allowing you to separately measure infrared, full-spectrum, or human-visible light for accurate lux calculations across an enormous...

SKU: SF-DEV-12587

Here at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-...

SKU: AF-1928

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution and a cute little driver board. We tried to get the smallest display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a US...

SKU: SF-DEV-12640

Here at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-...

SKU: AF-618

A compact 1.8" TFT display with true 18-bit colour (262,144 shades) and 160 × 128 resolution. It uses a simple SPI interface requiring only 4–5 digital pins and features two white LED backlights running on 3.3 V. Driven by the ST7735R chip. This is the raw display panel only — it is not mounted ...

SKU: DF-DFR0407

The Arduino 9 Axes Motion Shield is based on the Bosch BNO055 absolute orientation sensor — a System in Package (SiP) integrating a triaxial 14-bit accelerometer, 16-bit gyroscope (±2000°/s range), triaxial geomagnetic sensor, and a 32-bit microcontroller running BSX3.0 FusionLib software. The B...

SKU: AF-564

A small, portable inverter for EL wire. Powers off of 4 AAA batteries (not included!), it can drive 3-4 meters (10 to 13 feet) of our high-brightness EL wire OR 1 meter (3 feet) of EL tape OR a 10cmx10cm piece of EL panel for about 7 hours.There is a switch for selecting steady/blink/off modes...

SKU: DF-SEN0183

The CMPS11 is a 3rd-generation tilt-compensated magnetic compass module that combines a 3-axis magnetometer, 3-axis gyroscope, and 3-axis accelerometer. An onboard Kalman filter fuses gyro and accelerometer data to remove errors caused by tilting, delivering accurate heading readings regardless o...

SKU: DF-SEN0001

URM37 V4.0 Arduino Ultrasonic Sensor comes with temperature compensation which provides better distance measurement accuracy. It is very unique feature in the industry. URM37 V4.0 Arduino Ultrasonic Sensor offers output modes: analog output, switch, serial (TTL and RS232 level optional) and P...

SKU: SF-COM-10953

The MMA8452Q is a low-power, 3-axis capacitive MEMS accelerometer with 12-bit resolution. Packed with embedded motion-detection functions and configurable interrupt outputs, it can monitor events autonomously while staying in a low-power state — reducing the need for the host processor to continu...

SKU: SF-DEV-11113

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommen...

SKU: SF-DEV-11114

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We reco...

SKU: AF-3146

Create custom wire harnesses with these single-row housings for DIY jumper cables. Compatible with both male and female jumper wires, these housings give you full control over your wiring layout and connector configurations. Simply snap in raw jumper wires to build custom-length, custom-pin-coun...

SKU: AF-3145

A pack of 50 small single-row wire housings for building custom jumper cable harnesses. Compatible with both male and female crimp pins, these housings let you create exactly the wire configurations your project needs. Available in five sizes from 1-pin to 5-pin, they snap together easily with s...