All Products
Showing 21-40 of 100 products
Interface Cable - SMA Male to SMA Female (25cm, RG174)
A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA connectors provide a secure mechanical connection suitable for GPS, cellular, Wi-F...
Reinforced Interface Cable - SMA Male to TNC Male (300mm)
A 300mm (1 foot) SMA male to TNC male cable with injection-moulded stress-relief boots. Built with SYV-50-3 cable for an excellent balance of low signal loss and high flexibility — chosen over RG58 for superior performance at GNSS frequencies. Ideal for connecting RTK development boards to high-...
SMA Male to SMA Male Adapter
·
This compact RF adapter has standard-polarity male SMA connectors on both ends, making it useful when you need to change a female SMA connection into a male one.It can be screwed onto the female end of an SMA female-to-male interface cable to make a short SMA male-to-male cable assembly.It is par...
IPEX4 to SMA Wireless Communication Female Connector Cable for LattePanda 3 Delta / 2 Alpha / 2 Delta (20cm)
·
The IPEX4 to SMA Female Connector Cable is a 200 mm adapter designed for single-board computers equipped with an IPEX4 (MHF4) wireless interface, including the LattePanda 3 Delta, LattePanda 2 Alpha, and LattePanda 2 Delta. It converts the onboard IPEX4 connector to a standard SMA female port (ex...
WAVEGO, 12-DOF Bionic Dog-Like Robot, Open Source for ESP32 And PI4B, Facial Recognition, Color Tracking, Motion Detection
WAVEGO, 12-DOF bionic dog-like robot, open source for ESP32 and PI4B, facial recognition, color tracking, motion detectionHigh-DOF bionic quadruped robotPowered by ESP32 sub controller & Raspberry Pi 4B host controllerThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large to...
Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable RF connection for GPS, cellular, Wi-Fi, and other RF applications. The RP-SMA (R...
Passive GPS Antenna uFL - 9mm x 9mm -2dBi gain
·
An ultra-compact passive GPS antenna measuring just 9 × 9 × 6.5 mm, with a 50 mm uFL cable. Ideal for space-constrained projects where a full-size antenna won't fit. Key Features Tiny Form Factor – Only 9 × 9 × 6.5 mm uFL Connector – Standard uFL interface for easy connection to GPS modules ...
GPS/GNSS Magnetic Mount Antenna SMA - 3m
This GPS/GNSS magnetic mount antenna is designed for multi-constellation reception, supporting both GPS and GLONASS satellite systems. The magnetic base allows easy mounting on any metal surface such as a vehicle roof or ground plate, and the 3 m cable with standard SMA connector provides flexibl...
Matrix Portal S3 for HUB75 RGB Matrices - u.FL
·
Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...
Gravity Air780E 4G CAT1 IoT Module for China, India & SEA
·
Add LTE CAT1 connectivity to IoT projects and development boards with this Air780E communication module from DFRobot. It supports LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/B38/B39/B40/B41 bands, making it suitable for deployments in China, India, Southeast Asia and other supported regions.The module pr...
Air780EU 4G Cat 1 IoT Module for EMEA & Thailand
·
The Air780EU is a 4G Cat 1 communication module for IoT projects that need cellular connectivity across Europe, the Middle East, Russia, Thailand, Africa and other supported regions. It operates on LTE-FDD B1/B3/B7/B8/B20/B28 bands and provides up to 10Mbps downlink and 5Mbps uplink.It brings the...
SparkFun GPS-RTK-SMA Kit
The SparkFun GPS-RTK-SMA Kit provides everything you need to get started with centimetre-level GPS accuracy using the u-blox ZED-F9P module. Capable of 10mm three-dimensional positioning accuracy with RTK corrections, this kit is ideal for precision navigation, surveying, and autonomous vehicle a...
Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz
The Adafruit Si5351A Clock Generator with STEMMA QT lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. This updated version adds STEMMA QT / Qwiic connectors for solderless hookup alongside the traditional breadboard headers. With a pr...
Adafruit Feather 32u4 RFM69HCW Packet Radio - 868 or 915 MHz
·
The Feather 32u4 RFM69HCW Packet Radio (868/915 MHz) combines an ATmega32u4 microcontroller with an SX1231-based packet radio transceiver, USB connectivity, and LiPo battery charging. It offers longer range than 2.4 GHz protocols (Bluetooth, Wi-Fi, ZigBee) with more flexibility than BLE, making i...
Monkey Board
Overview Designed in Australia, the DAB+ FM Digital Radio Development Board Pro provides a platform for developing and evaluating DAB+, SlideShow and FM receiver. The board contains a Keystone T2_L4A_8650C DAB/FM module and a Microchip PIC18F14K50 microcontroller. The T2_L4A_8...
SparkFun RTK Reference Station
The SparkFun RTK Reference Station is a high-precision GNSS base station designed for surveying, geolocation, and time reference applications. Set up a fixed-location NTRIP server to provide RTK corrections to rovers, or use it as an NTP server for network time synchronisation — all with just a f...
SparkFun ESP8266 Thing - Dev Board
This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink ...
SparkFun ESP8266 Thing - Dev Board (with Headers)
This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink L...
RM500U-CN 5G HAT for Raspberry Pi, Quad Antennas LTE-A, Multi Band, 5G/4G/3G
A 5G cellular HAT for Raspberry Pi featuring the Quectel RM500U-CN module with quad antenna support. This board brings high-speed 5G, 4G LTE-A, and 3G connectivity to your Raspberry Pi, Jetson Nano, or PC — supporting both 5G NSA and SA networking modes. The HAT connects via USB 3.1 (USB 2.0 com...
USB/TTL Raspberry Pi GPS Tracker
The USB/TTL Raspberry Pi GPS Tracker is a compact GPS location module built around the L80-39 chip. With 66 search channels and 22 simultaneous tracking channels, it delivers fast satellite acquisition and reliable positioning accuracy down to 2.5m. Featuring both USB and TTL interfaces, this mo...
