All Products

SKU: SS-101020003

A simple momentary push button module in the Grove form factor. When pressed it outputs a HIGH signal; when released it returns to LOW. The button includes a built-in pull-down resistor, so it's ready to use as a digital input straight out of the box. Part of the Seeed Studio Grove ecosystem, it...

SKU: SS-101020023

The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer.   Features Grove compatible interface Wide supply vo...

SKU: SF-PRT-15109

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and ...

SKU: SS-114020041

NOTE - this product is End of Line.  The software no longer works with this version.The modules can be used as is and already have code that makes them interact with each-other but they can not be re-programmed. What’s the Grove Zero？ The Grove Zero is a set of electronics modules that teach...

SKU: LB-PD-0008

Learn how to incorporate Grove Zero in your Digital Technologies Curriculum.In this webinar, you will be introduced to the Grove Zero and shown examples on how they can be implemented in the classroom.

SKU: AF-4309 · MPN: 4309

The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have full range of hundreds of Grove modules with Particle Mesh along with our Feathe...

SKU: M5-A034-D

Description GROVE Cable would be a necessary tool used on M5Stack development, since all PORTs on M5Core are GROVE stadard. This Grove cable, compatible with the GROVE port on M5Core,simply have 4 lines, two for data, one for power,and one for Ground. We've offered alternative length: 10c...

SKU: M5-A034-C

Description GROVE Cable would be a necessary tool used on M5Stack development, since all PORTs on M5Core are GROVE stadard. This Grove cable, compatible with the GROVE port on M5Core,simply have 4 lines, two for data, one for power,and one for Ground. We've offered alternative length: 10c...

SKU: M5-A046

1. Grove to GroveGROVE 2 GROVE is a GROVE extension connector. Two female GROVE port sit back-to-back.  One common use of this part is for the RGB LED strip extension. Feature:GROVE-to-GROVERGB LED strip extensionpackage includes: 5x connector2. Grove to PinGROVE 2 PIN is a GR...

SKU: AF-4528

A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...

SKU: AF-5244 · MPN: 5244

A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch), 4-pin Length – 100 mm Wires – 4 (bare ends) Wire Colours Black – GND Red...

SKU: SS-110010044

The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introduction to the XIAO development platform. Designed for beginners, it comes with free online courses to help you get started quickly. The kit cove...

SKU: EF-EF11097

Specially designed to connect to Grove sensors, can be used on sensor:bit, octopus:bit, or other expansion boards. Used to connect IIC devices

SKU: AF-5862 · MPN: ADA5862

The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...

SKU: SS-104020108 · MPN: 104020108

Several kinds of LED Strips have already been available in our bazaar for a long time, however, there were no Grove compatible LED strips. Now, we recommend the Grove - WS2813 RGB LED Strip Waterproof series for you.This series products are awesome, and have three significant advantages over othe...

SKU: SS-101020044

Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector. Specifications Power requirements: 5 VDC @ ~120 mA (heater on) Detection Gas: Alcohol Concentration: 20-1000ppm Alcohol Inter...

SKU: EF-EF11096

Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices can not be used.

SKU: AF-4424 · MPN: 4424

A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...

SKU: SS-E23011220

A high-performance, MCU-based smart vision module powered by the Himax WiseEye2 HX6538 processor, featuring a dual-core Arm Cortex-M55 with an integrated Arm Ethos-U55 neural processing unit. With Arm Helium technology optimised for vector data processing, it delivers strong ML and DSP performanc...

SKU: SS-108020021

Features Easy to use Cartoon Style mini fan Soft fan-blade to avoid injuries Built-in programmable microcontroller that uses Arduino IDE You can change the code to drive servo motors instead of DC motor Description Hey hey, calm down, have some fresh air here. The Grove – Mini Fan v1.1 can be ...