All Products

SKU: SF-COM-30230 · MPN: COM-30230

This compact surface-mount DIP switch provides 8 individual switch positions for adding simple, user-selectable controls to a PCB.Each position is an SPST slide switch, making it suitable for general control switching in embedded projects, configuration inputs, mode selection and similar low-curr...

SKU: SF-COM-28383 · MPN: COM-28383

Add reliable audio input to your digital signal processing projects with this electret condenser microphone and stand-off washer. It has been selected for compatibility with the popular Teensy Audio Adaptor.The included custom laser-cut washer helps with convenient flush mounting directly to the ...

SKU: SF-TOL-10285

A classic analog panel meter for measuring DC voltage from 0 to 5V. Features a clear, easy-to-read scale with an adjustable dial for zero calibration. Ideal for monitoring sensor outputs, power supply voltages, and other 5V range signals in your projects. Key Features 0–5V DC Range – Perfect f...

SKU: SF-SEN-13030

The SparkFun RFID Reader Breakout converts the 2mm pin spacing of ID-series RFID readers to breadboard-friendly 0.1" headers. Compatible with the ID-3LA, ID-12LA, and ID-20LA readers, this board lets you solder the reader directly or use 2mm sockets for a removable connection. Every pin is broke...

SKU: AF-16 · MPN: 16

A blank metal tin in the classic Altoids gum size — perfect for housing small electronics projects. Custom-made with a flattened bottom (instead of rounded) so components sit flush inside. Ideal for building portable USB chargers, MintyBoosts, and other compact builds. Specifications Outside D...

SKU: AF-659 · MPN: 659

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learnin...

SKU: SF-PRT-00139

A USB Type-B female connector with 0.1" pin spacing, suitable for use on development boards and perfboard. The four connection pins fit standard 2.54 mm pitch headers. The two support posts can be accommodated by drilling 80 mil holes, or trimmed off entirely for a flush fit. Specifications Co...

SKU: DF-FIT0281

A 10-pack of M3 × 25mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0280

A 10-pack of M3 × 12mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0269

A 10-pack of M3 × 30mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0274

A 10-pack of M3 × 20mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0273

A 10-pack of M3 × 16mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0294

A 10-pack of M3 × 6mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (All...

SKU: DF-FIT0270

A 10-pack of M3 × 10mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0115-B

A rugged, waterproof illuminated pushbutton designed for panel-mount applications. Built from stainless steel, this momentary switch features a blue LED ring that provides clear visual feedback, making it easy to identify switch status at a glance. The integrated LED operates on 5–12V, making it...

SKU: AF-2176 · MPN: 2176

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a narrow bevel finish. Slot the LED through the opening, insert the plastic retaining cap, and tighten the threaded washer for a clean, professional look on any panel or enclosure. Key Features Chromed Metal – ...

SKU: AF-2175 · MPN: 2175

Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a flat finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The flat bezel sits flush against the panel for a clean, low-profile look. Key Features Snap-F...

SKU: MM-RB-SDBLUE

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-r...

SKU: MM-RB-BLUE

The ModMyPi Modular Raspberry Pi 2 Case in blue is a fully customisable, two-part ABS plastic enclosure designed for the Raspberry Pi 2 Model B and B+. Its modular design lets you add stackable spacer plates, security covers, and VESA mounts to adapt the case to your project's needs — from a simp...

SKU: TB-PH9234

We call these safety clips because the side of the clip totally covers the battery terminals and sits flush on the top of the battery. Supplied with high quality AWG24 connection cable. Cable exits the clip at the side, hence the T type. Specifications Type of Cell 9V Warranty: 3Months