All Products
AI Overview
“Grove” typically refers to Seeed Studio’s 4‑pin, plug‑and‑play modular sensor ecosystem (easy, no-solder connections). Here are the best matches by use case:
Grove kits (best for getting started)
- Grove Inventor Kit for micro:bit (micro:bit, sensors + actuators bundle) $125.10
- Grove Starter Kit for Raspberry Pi Pico (Raspberry Pi Pico, Grove modules + learning bundle) $98.30
- Grove - Starter Kit for Arduino (Arduino with Grove Base Shield) $93.60
Grove “shields” / adapters (to add Grove ports to your board)
- Grove Shield for micro:bit (micro:bit → Grove connectors expansion) $22.15
- Grove Shield FeatherWing for Particle Mesh and all Feathers (Feather/Particle Mesh → Grove connectors) $13.70
Common Grove modules (sensors / inputs)
- Grove - Button (momentary pushbutton module) $4.65
- Grove - Sound Sensor (microphone / sound level sensing) $6.20
Grove cables & interconnects (for wiring/compatibility)
- GROVE Cable 100cm-1pcs (1 m Grove cable) $4.90
- GROVE Cable 50cm-2pcs (2-pack, 50 cm Grove cables) $4.90
- Grove to Pin (Grove extension/adapter for flexible hookups) $5.25
- Grove Cable Pigtail - 2mm pitch 100mm long (Grove → bare wire pigtail, 100 mm) $2.15
Grove ↔ Qwiic / STEMMA QT (I2C ecosystem bridging)
- Qwiic Cable - Grove Adapter (150mm) (Qwiic ↔ Grove adapter cable) $4.95
- Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long (Grove ↔ JST-SH STEMMA QT/Qwiic, 100 mm) $4.15
Grove Zero (education line)
- Grove Zero Starter Kit entry kit $19.55
- Teaching With Grove Zero teaching resource $0.02
What are you trying to do with Grove?
Collections
Showing 21-40 of 96 products
Grove - Alcohol Sensor
Grove to Octopus Cable
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
Grove Vision AI v2 Kit - with Raspberry Pi OV5647 Camera Module and Seeed Studio XIAO
BitMaker_V2 - JST 2.0 battery connector & 6 Grove connectors
Grove - Mini Fan v1.1
Cytron MOTION 2350 Pro RP2350 Robotics Controller
MPN: ADA6080
Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor
Grove-T Connector (5pcs)
I2C to 8-Channel Solenoid Driver
MPN: ADA6318
Matrix Portal S3 for HUB75 RGB Matrices - u.FL
MPN: ADA6475
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
RedBear Duo
RB Link
mbed Shield
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad
JST PH 4-Pin Socket to Color Coded Cable - 200mm
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
Adafruit PyGamer for MakeCode Arcade, CircuitPython or Arduino
Grove - Alcohol Sensor
Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector. Specifications Power requirements: 5 VDC @ ~120 mA (heater on) Detection Gas: Alcohol Concentration: 20-1000ppm Alcohol Inter...
Grove to Octopus Cable
Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices can not be used.
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...
Grove Vision AI v2 Kit - with Raspberry Pi OV5647 Camera Module and Seeed Studio XIAO
A high-performance, MCU-based smart vision module powered by the Himax WiseEye2 HX6538 processor, featuring a dual-core Arm Cortex-M55 with an integrated Arm Ethos-U55 neural processing unit. With Arm Helium technology optimised for vector data processing, it delivers strong ML and DSP performanc...
BitMaker_V2 - JST 2.0 battery connector & 6 Grove connectors
Features Easy Usage: Start by simply sliding into the Micro:bit Enhanced functionality: Equipped additionally with an RGB LED, a power switch, a power indicator, and six spare grove connectors Charge: Powered by a USB cable or an external battery Language Supported: MakeCode/MicroPython Comes wi...
Grove - Mini Fan v1.1
Features Easy to use Cartoon Style mini fan Soft fan-blade to avoid injuries Built-in programmable microcontroller that uses Arduino IDE You can change the code to drive servo motors instead of DC motor Description Hey hey, calm down, have some fresh air here. The Grove – Mini Fan v1.1 can be ...
Cytron MOTION 2350 Pro RP2350 Robotics Controller
·
Built around Raspberry Pi’s RP2350 processor, this Cytron robotics controller is made for beginner and intermediate builders who want to create more advanced robots while spending less time on the supporting electronics.The board integrates a 4-channel brushed DC motor driver, servo outputs, GPIO...
Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor
The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidation issues and won't introduce DC currents into your plants. The ATSAMD10 microco...
Grove-T Connector (5pcs)
Description Grove-T is a T-shaped hub. Is this remind you the HUB unit ? They are basically the same thing, just in different shape.This is also used for GROVE port expanding. Notice: Grove-T is just a hardware expander, if you are looking for hardware and software(standard prot...
I2C to 8-Channel Solenoid Driver
·
This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, inductive loads.Solenoid power connects through the centre terminal blocks, with eac...
Matrix Portal S3 for HUB75 RGB Matrices - u.FL
·
Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...
RedBear Duo
The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your idea. Powered by an STM32F205 ARM Cortex-M3 at 120 MHz with Broadcom BCM43438 wir...
RB Link
The RBLink is a development and debugging board for the RedBear Duo, designed for use with the Broadcom WICED SDK. It features an ST-LINK/V2 debugger, USB drag-and-drop programming, and eight Grove-compatible connectors for rapid prototyping with Seeed's Grove sensor and actuator modules. With s...
mbed Shield
The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad
Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and LED driving — all over plain I2C, no NeoPixel pin management required. The boar...
JST PH 4-Pin Socket to Color Coded Cable - 200mm
This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! Black for GND Red for V+ White for SDA Green for SCL Even though...
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, or any standard 0.1″ pitch connection. Key Features JST PH to Male Headers – ...
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the Hallowing or Trellis M4. Can also be used with any STEMMA bre...
Adafruit PyGamer for MakeCode Arcade, CircuitPython or Arduino
The Adafruit PyGamer is a pocket-sized, open-source gaming handheld built for DIY game development and retro emulation. Powered by the ATSAMD51 running at 120 MHz with 512 KB flash and 192 KB RAM, it features an analog thumbstick, six tactile buttons, a colour TFT display, and stereo audio — all ...
