All Products
AI Overview
Here are the main Elecrow options, grouped by what you’re building:
Starter & learning kits (best for beginners)
- Elecrow UNO R3 Basic Starter Kit with Tutorial for Arduino ($19.15) — low-cost intro kit built around an UNO R3.
- Elecrow UNO R3 Starter Kit for Arduino ($48.35) — upgraded, more complete Arduino UNO R3 starter kit.
- Elecrow UNO R3 Starter Kit with Mulity Modules for Arduino ($84.25) — larger bundle with 200+ components/modules.
- Elecrow Starter Kit for Arduino ($41.20) — Arduino kit with a mix of sensors + display parts.
- Elecrow 37-in-1 Sensors Module Kit for Arduino ($31.10) — add-on pack of common Arduino sensor/modules.
- Elecrow Electronic Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer ($16.55) — general-purpose breadboard + components bundle for prototyping.
micro:bit kits
- Elecrow Basic Kit for BBC Micro:bit ($19.95) — entry kit for BBC micro:bit projects.
- Elecrow Crowtail Learning Starter Kit for Micro:bit 2.0 ($97.45) — guided kit with 20 lessons (note: micro:bit not included per listing).
Raspberry Pi Pico
- Elecrow Raspberry Pi Pico Advanced Kit with 32 Modules and 32 Projects Lessons ($97.95) — 32 modules + 32 project lessons for Pico learners.
Boards, displays & wireless (project building blocks)
- Crowduino Mega2560 ($42.80) — Elecrow’s Mega2560-compatible board (ATmega2560-based).
- 2.8 TFT Touch Shield V4.3 ($30.40) — 2.8\" 240×320 SPI TFT with resistive touch + SD socket.
- Bluetooth Bee ($29.65) — Bluetooth V2.0+EDR serial module in an XBee-style form factor.
- Lora RFM95 Shield-915MHZ-V1.1 ($28.50) — 915MHz LoRa shield for long-range Arduino comms.
- Elecrow ThinkNode M1 - LoRa Meshtastic Transceiver with 1.54" EPD Screen, GPS & nRF52840 (915MHz) ($80.35) — integrated Meshtastic device with nRF52840 + GPS + 1.54\" EPD, 915MHz.
Portable workstation accessory for Raspberry Pi 5
- 14" CrowView Note with Raspberry Pi 5 Bridge Board ($306.05) — 14\" laptop-style display/keyboard dock designed to pair with Raspberry Pi 5 via bridge board.
What kind of Elecrow product are you looking for?
Collections
Showing 21-40 of 100 products
Lora RFM95 IOT Board for RPI
The LoRa RFM95 IoT Board for Raspberry Pi is a long-range wireless communication module based on the RFM95 LoRa transceiver. Operating at 915 MHz (AU/US frequency), it provides spread spectrum communication with high interference resistance, making it suitable for IoT, remote sensing, and telemet...
Elecrow Upgraded Electronics Kit
A comprehensive 300+ piece electronics component kit for getting started with Arduino, Raspberry Pi, and general electronics prototyping. Everything is packed into a single box for organised, efficient access — covering the core components you'll reach for again and again across beginner and inte...
2.4 inch TFT Touch Shield for Arduino
A 2.4″ colour TFT LCD touch shield from Elecrow that plugs directly onto an Arduino Uno or Mega. The ILI9341-driven display delivers 240 × 320 resolution with 18-bit colour (262,000 shades), and includes a 4-wire resistive touchscreen, microSD card slot, and reset switch. Key Features 240 × 32...
Crowduino-UNO-ESP8266-V1.1
The Crowduino UNO ESP8266 combines an Arduino UNO-compatible microcontroller with an onboard ESP8266 WiFi module in a single, compact board. Instead of wiring a separate WiFi shield or module, you get integrated wireless connectivity right out of the box. Built around the ATmega328 running at 16...
ELE BlueTooth Shield-V1.2
The ELE Bluetooth Shield V1.2 adds wireless serial communication to your Arduino or Crowduino via Bluetooth V2.0+EDR. Simply stack it onto your board, select two digital pins (D0–D7) for software serial, and start sending data wirelessly at up to 3 Mbps. Built around a CSR Bluecore 04-External c...
32u4 with A9G GPRS GSM GPS-V1.1
An all-in-one development board combining an ATmega32U4 microcontroller with an A9G GPRS/GSM/GPS module. Capable of making voice calls, sending SMS text messages, and providing GPS positioning — all controllable via AT commands over serial. The board includes analogue, I2C, and digital expansion ...
GPS Shield With Antenna
The GPS Shield is based on the u-blox NEO-6M receiver module and plugs directly into Arduino UNO, Mega, and compatible boards. It provides GPS positioning data via a serial port connection (pins configurable to D0–D7) and includes a micro SD card slot for data logging. An active IPC antenna is i...
4 Channels IR Reflective Sensor
This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel outputs a low (TTL 0) signal and its indicator LED lights up. Each channel has an onbo...
4 Channels RF Remote Control Module DC 5V
This Elecrow 4-channel RF remote control module pairs a 433MHz wireless receiver board with a 5-button RF remote controller. Each of the four latching relays provides passive (dry contact) output, allowing you to switch mains-powered appliances or DC loads up to 10A without additional circuitry. ...
315Mhz RF Transmitting Receiver Module
A basic 315MHz RF link kit consisting of a transmitter and receiver module pair. Commonly used for simple wireless remote control, data transmission, and sensor communication between microcontrollers. Works well with the Arduino VirtualWire library for easy integration. The transmitter accepts 3...
10.1" IPS Capacitive Touch Screen with RGB Animated light compatible with Raspberry Pi
A 10.1" IPS capacitive touchscreen with 1280 × 800 resolution and a distinctive RGB light strip on the back featuring 27 individually addressable LEDs with 19 animated lighting modes. Compatible with Raspberry Pi 3/3B+/4B, Jetson Nano, BeagleBone, Banana Pi, and other development boards, as well ...
CrowPanel 7.0" -HMI ESP32 Display 800x480 RGB TFT LCD Touch Screen Compatible with Arduino
This CrowPanel module is a 7.0-inch HMI touch display built around the ESP32-S3-WROOM-1-N4R8, giving you a ready-to-program screen for IoT, automation and user-interface projects. The 800*480 TFT-LCD uses capacitive touch for responsive interaction, with WiFi and Bluetooth available from the ESP3...
Elecrow 10.1 inch Display IPS 1280x800 Acrylic Case Touch Screen Compatible with Raspberry Pi
This 10.1-inch HDMI touchscreen monitor has a high-definition resolution of 1280*800 and supports a viewing angle of 178°, providing an excellent visual experience. It supports Raspberry Pi, Windows, Linux, Ubuntu and other systems, and is also compatible with Raspberry Pi 3/3B+/4B/5, Jetson Nano...
ThinkNode M2 Meshtastic (LoRa) Signal Transceiver Powered By ESP32-S3 With 1.3” OLED Display - (Without Battery)
Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile phones. M2 is pre-installed with Meshtastic firmware and equipped with an SX1262 wi...
ThinkNode G3-Single Channel LoRaWAN Gateway ESP32-S3 Chip
ThinkNode G3 is a high-performance, compact LoRaWAN gateway designed for IoT communications by Elecrow. It uses the ESP32-S3 dual-core processor and Semtech SX1262 transceiver, equipped with a 240MHz dual-core main control, integrated Bluetooth, WiFi and optional 4G modules(Not yet released), an...
ThinkNode M5 Walkie-Talkie Pro- Meshtastic (LoRa) Signal Transceiver |ESP32-S3 | 1.54” Screen | GPS Function-915 MHz
The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and receives LoRa signals for off-grid mesh networking. With its compact, integrated des...
ThinkNode M6 Outdoor Solar Power for LoRa, Powered By nRF52840 Supports GPS
The ThinkNode M6 Outdoor Solar Power is a high-performance LoRa IoT device designed for harsh outdoor environments and industrial scenarios.It features the nRFLR1262 LoRa transceiver module and the nRF52840 core processor, supporting Bluetooth and LoRa dual-mode connectivity to ensure stable sign...
CrowPanel Advance 2.8“ HMI|ESP32-S3 AI-Powered IPS Touch Screen (320x240)|With Acrylic Case
Building on the success of the CrowPanel Basic series, we proudly introduce the CrowPanel Advance Series—designed to deliver superior performance and richer features for demanding applications.The Advance ESP32 2.8-inch AI display is an upgraded version of the CrowPanel HMI 2.8-inch display. It i...
All-in-one Starter Kit for Arduino NANO R4 with 20 lessons and 16 modules
The All-in-one Starter Kit for Arduino NANO R4 is the ideal choice for starting your journey into the world of electronics and maker projects. Perfectly compatible with the Official Arduino NANO R4 board, it integrates 16 diverse sensors (15 onboard sensors and 1 humidity sensor with a Crowtail i...
ThinkNode M7 Meshtastic Wireless Communication Gateway, Support PoE Power, Powered By ESP32-S3 and LR1110
This ThinkNode M7 is a high-performance gateway based on the ESP32-S3 module and LR1110 LoRa chip, deeply adapted for the LoRa protocol. The device features an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz, providing powerful computing capabilities. It also integrates 2...