All Products

SKU: AF-3403

The Feather M0 Express is Adafruit's CircuitPython-optimised Feather, built around the ATSAMD21G18 ARM Cortex M0+ processor. It combines the standard Feather M0 platform with 2 MB of SPI flash storage, a Mini NeoPixel, and a UF2 bootloader for drag-and-drop programming — no special tools or drive...

SKU: AF-1897

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times with...

SKU: AF-1895

The Adafruit I2C Non-Volatile FRAM Breakout provides 256 Kbit (32 KByte) of fast, non-volatile storage for your microcontroller projects. FRAM (Ferroelectric RAM) combines the speed of SRAM with the persistence of EEPROM — data is written instantly and retained for up to 95 years at room temperat...

SKU: SF-WRL-12775

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine)...

SKU: DF-DRI0035

INTRODUCTION This is a stepper motor driver introduced by DFRobot for those projects require powerful stepper motors, such as a pair of automatic curtains, an XY Plotter. This shield allows Arduino drive stepper motors (up to 2A per motor coil, 40V max). This stepper mo...

SKU: SF-WRL-12823

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine)...

SKU: DF-SEN0188

INTRODUCTION This is an Arduino compatible fingerprint module. With the high speed DSP processor, it could also work with other serial device, like MSP430, 51, AVR, PIC, STM32, ARM and FPGA device. This fingerprint module could work alone without any principal computer ...

SKU: DF-FIT0415

This lightweight nylon pan-and-tilt bracket lets you mount a small camera, sensor, or other module on two servos for full two-axis movement. Compatible with most 9–12 g micro servos, it's a quick way to add directional control to robots, drones, and FPV rigs. Key Features Two-Axis Pan & Tilt –...

SKU: PL-1039

The hardware kit for the Pololu 3pi robot expansion board. This contains the standoffs, screws, nuts, and headers needed to mount an expansion PCB above the 3pi robot — but does not include the expansion PCB itself. Useful if you're designing your own custom expansion board or need replacement ha...

SKU: AF-3176

The Feather M0 RFM69HCW Packet Radio (868/915 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 868 or 915 MHz. The exact radio frequency is software-configurable, allowing you to tune dynamically for your reg...

SKU: AF-3177

The Feather M0 RFM69HCW Packet Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 433 MHz. It includes built-in USB, LiPo battery charging, and the full Feather M0 pin set in a compact, portable form...

SKU: DF-DFR0323

The Bluno Mega 2560 combines the ATmega2560 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module, bringing wireless communication to the Arduino Mega form factor. It supports wireless programming over BLE, Bluetooth HID, iBeacon, and serial pass-through — while remaining fully ...

SKU: AF-3179

The Feather M0 RFM96 LoRa Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 433 MHz. LoRa modulation delivers significantly greater range than conventional packet radio — over 2 km line-of-sight w...

SKU: AF-3178

The Feather M0 RFM95 LoRa Radio (900 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The exact frequency is software-configurable, allowing you to tune dynamically for your region's ISM ban...

SKU: DF-FIT0356

A 1-metre weatherproof digitally addressable RGB LED strip with 60 WS2812 LEDs. Each LED is individually controllable via a single data line, supporting 256 brightness levels per channel and over 16 million colours. The integrated control circuit and RGB chip are packaged in standard 5050 compone...

SKU: DF-DFR0191

The DFRobot Mega 2560 V3.0 is a fully compatible Arduino Mega 2560 R3 microcontroller board based on the ATmega2560. It features 54 digital I/O pins (14 with PWM), 16 analog inputs, 4 hardware serial ports, and a 16 MHz crystal oscillator. Connect via USB or power with a 7–12 V adapter or battery...

SKU: SF-WIG-13720

Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote trig...

SKU: DF-FIT0352

LED Strips always glow nicely in the dark and are super fun to play with. They can be used in home decorations, festives and interactive art installations. For example this Christmas someone put a phone-controlled strip around the Christmas tree for S.O., and it looked great! (Instructables) ...

SKU: AF-3061

The Feather M0 WiFi with uFL pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module, featuring a uFL connector instead of an on-board antenna. This allows you to connect an external 2.4 GHz antenna for improved range or custom antenna placement in enclosures. The ATWINC15...

SKU: AF-2946

The Adafruit IS31FL3731 breakout is a charlieplexed PWM LED matrix driver that controls a 16×9 grid of individually dimmable LEDs over I2C. Each of the 144 LEDs can be set to any brightness level with 8-bit (256-level) PWM — no complex wiring or constant signal sending required. The IS31FL3731 o...