Pololu
3pi Expansion Kit Hardware (No PCB)
All Products
New Arrivals
Robotics
Enclosures & Hardware
Brands and Manufacturers
Robotics & Motion
Robotics
Standoffs & Screws
Pololu
$8.30
|
Out of stock
The hardware kit for the Pololu 3pi robot expansion board. This contains the standoffs, screws, nuts, and headers needed to mount an expansion PCB above the ...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
The hardware kit for the Pololu 3pi robot expansion board. This contains the standoffs, screws, nuts, and headers needed to mount an expansion PCB above the 3pi robot — but does not include the expansion PCB itself. Useful if you're designing your own custom expansion board or need replacement hardware.
Package Contents
- 1× Extended 2×7 male header
- 2× Extended 1×2 male headers
- 1× 2×7 female header
- 2× 1×2 female headers
- 4× 22 mm nylon spacers
- 4× 1-1/4" #2-56 screws
- 4× #2-56 nuts
Note: The expansion PCB is not included in this kit. This is the hardware-only pack.
Jargon buster
Plain-language definitions for the technical terms used above.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
Find this product in
Brands
Related Tutorials
Free guides on learn.littlebird.com.au
