All Products

SKU: DF-DFR1045 · MPN: DFR1045

The DFRobot 15.6" IPS capacitive touch display is designed for single-board computers, mini PCs, and industrial HMI applications. It features a 1920×1080 resolution panel with optical bonding and anti-glare surface treatment, plus 10-point capacitive touch with a separate touch control board usin...

SKU: DF-DFR1178 · MPN: DFR1178

The DFRobot 15.6" Portable 4K OLED Touch Display features a Samsung OLED panel with 3840×2160 resolution, delivering exceptional colour accuracy with 100% DCI-P3 and 100% Adobe RGB coverage. With 829 million self-luminous pixels, a 100,000:1 contrast ratio, and 550 nit peak brightness, it provide...

SKU: DF-DRI0042

The DFRobot DRI0042 is a compact, high-current DC motor driver capable of continuously driving a single motor at up to 15A (with heatsink) from a 12–36V supply. The onboard LM2575 regulator provides a 5V 500mA output for powering an Arduino or other controller, and all control signal inputs inclu...

SKU: WS-25093

A 1.5-inch OLED display module with 128×128 resolution and black/white pixels. Built around the SH1107 driver chip with an ultra-narrow bezel, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with 3.3 V and 5 V microcontrollers. Waveshar...

SKU: AT-P1906

A 1.5 m USB 2.0 cable with a Type-A male connector on one end and a Micro-B male connector on the other, rated for up to 3 A of current. Designed for powering Raspberry Pi boards and other devices or projects that require higher-than-standard USB power delivery. Key Features 3 A Current Rating...

SKU: SS-321020000

A 1.5 m HDMI male-to-male cable for connecting HDMI-enabled devices such as Raspberry Pi boards, laptops, media players, and game consoles to monitors or TVs. Supports HDMI v1.3 standard. Key Features HDMI Male to HDMI Male – Standard full-size connectors on both ends 1.5 m Length – Convenien...

SKU: TB-HP0407

A bulk pack of 200 steel M3 machine screws, 15 mm long, with pan head and Phillips drive. Suitable for electronics enclosures, PCB mounting, robotics, and general-purpose assembly. Specifications Thread Size – M3 machine thread Length – 15 mm Head Type – Pan head Drive Type – Phillips Mate...

SKU: LB-SOLAR

A compact micro solar cell rated at 1.5 V and 400 mA (0.65 W peak), ready to use with pre-soldered anode and cathode wires. Its small 80×60 mm form factor makes it well suited for DIY solar projects, battery charging experiments, and powering small loads like motors, LEDs, and light bulbs. Key F...

SKU: LB-SOLAR-M

A compact micro solar panel rated at 1.5 V and 400 mA (0.65 W peak), fitted with pre-soldered male jumper wires for direct breadboard use. Its small 80×60 mm form factor makes it easy to integrate into DIY solar projects and prototyping setups. Key Features 1.5 V / 400 mA Output – 0.65 W peak ...

SKU: TB-MP3480

The Jaycar MP-3480 is a compact, regulated 5VDC 3A switchmode plug pack with a slim profile designed to fit side-by-side on a powerboard. It accepts 100–240VAC 50/60Hz input (AU/NZ 2-pin plug) and comes with 7 interchangeable DC output plugs to suit a wide range of devices. Australian safety app...

SKU: TB-TH2020 · MPN: TH2020

Great for quick and easy low stress repairs to timber, cardboard, paper and many household materials. It is fast, easy and simple to use with trigger controlled glue feed. Uses 7mm diameter glue sticks which are easily fed into the rear of the unit.Includes 2 x 7mm glue sticks. Packs of glue stic...

SKU: LB-LS0199

A colourful assortment of 160 miniature tactile push buttons in eight different colours, neatly organised in a handy storage container. Perfect for adding colour-coded inputs to your electronics projects. Key Features 8 Colours – Red, yellow, orange, blue, green, white, black, and purple 20 B...

SKU: LB-LR0567

A large 1660-point solderless breadboard with plenty of room for advanced prototyping. Features a sturdy black aluminium backing plate, three binding posts for external power connections, and accepts a wide range of wire gauges. Key Features 1660 Tie Points – 1260 across two terminal strips pl...

SKU: DF-FIT0584 · MPN: FIT0584

This flexible silicone-insulated wire pair is made for high-current power wiring in demanding electronics, robotics and motion-control projects. It uses fine tin-plated copper strands for good conductivity and oxidation resistance, with a twisted multi-strand structure that helps reduce signal in...

SKU: EF-EF03012

A compact 16-channel relay module using HUIKE mini-relays, providing optocoupler-isolated control of up to 16 independent circuits. Despite having 16 channels, the board is close in size to a standard 8-channel relay module thanks to the mini-relay form factor. Each channel has a dedicated LED i...

SKU: WS-30795 · MPN: 30795

The Waveshare Modbus POE ETH Relay 16CH is an industrial-grade 16-channel relay module controlled over Ethernet using Modbus RTU or Modbus TCP protocol. It features dual Ethernet ports for cascading, Power over Ethernet (PoE) support to IEEE 802.3af, and optocoupler-isolated relay drivers with fl...

SKU: SF-COM-00299

The Texas Instruments CD74HC4067 is a 16-channel analogue multiplexer/demultiplexer IC. It allows you to route one of 16 analogue signals to a single common pin (or vice versa) using just 4 digital control lines plus an enable pin — effectively expanding a single ADC channel to read from 16 sourc...

SKU: PL-973

A 20" (50 cm) 16-conductor ribbon cable with IDC connectors on both ends. Ideal for connecting to 16-pin character LCDs, shrouded box headers, and other 2×8 pin interfaces in electronics projects. Specifications Conductors – 16 Connector Type – IDC (both ends) Length – 20" (~50 cm) Pin Pitc...

SKU: M5-U026

The M5Stack 16-Key Capacitive Touch Unit is a Makey Makey-inspired input device built around an ATmega328P microcontroller. It detects capacitive touch across 16 key pads, allowing you to turn everyday objects — fruit, foil, water, or anything conductive — into touch-sensitive buttons. A built-in...

SKU: AF-1873

A 16 MHz ceramic resonator with built-in load capacitors, providing a simple clock source for microcontrollers. The 3-pin package has 0.1" (2.54 mm) pin spacing for direct breadboard use — connect the two outer pins to XTAL-in and XTAL-out (the package is symmetric, so either outer pin works for ...