All Products

SKU: AF-6216 · MPN: ADA6216

A warm-white LED filament shaped as the letter "Y", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6217 · MPN: ADA6217

A warm-white LED filament shaped as the letter "Z", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-5281

An Alpha 5K linear potentiometer with right-angle PC mount pins spaced at 0.2" — perfect for plugging directly into a breadboard or perfboard during prototyping. When you're ready for a permanent build, mount it to a panel using the included washer and hex nut. Key Features 5K Ohm Linear Taper...

SKU: SF-SEN-12566

The ALS-PT19 is a compact SMD ambient light sensor, significantly smaller than standard through-hole alternatives like the TEMT6000. Functioning as an NPN phototransistor, it provides an analogue voltage output proportional to ambient light levels — making it easy to integrate into light-sensing ...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: AF-16

A blank metal tin in the classic Altoids gum size — perfect for housing small electronics projects. Custom-made with a flattened bottom (instead of rounded) so components sit flush inside. Ideal for building portable USB chargers, MintyBoosts, and other compact builds. Specifications Outside D...

SKU: AF-97

A blank metal tin in the classic Altoids mints size — the larger format, perfect for housing electronics projects that need a bit more room. A popular choice for DIY builds and portable project enclosures. Specifications Lid Outer Dimensions – 59.9 × 95mm (2.36″ × 3.75″) Tin Bottom Dimensions...

SKU: TB-NM2860

A 50-metre roll of conductive aluminium foil tape, useful for RF shielding, EMI protection, heat reflection, and a wide range of electronics and maker projects. The acrylic-based adhesive provides strong bonding across a broad temperature range. Specifications Tape Width – 50mm Roll Length – ...

SKU: DF-FIT1029 · MPN: FIT1029

This aluminium enclosure is designed specifically for the LattePanda IOTA, combining a rugged protective case with a large passive heatsink. The whole case body helps draw heat away from the processor, supporting sustained performance without adding a fan.Its fanless design keeps operation silent...

SKU: DF-FIT0943 · MPN: FIT0943

This aluminium heatsink kit is designed specifically for the ROCK Pi 4SE single-board computer, helping draw heat away from the board for more stable operation.The large metal heatsink provides efficient passive cooling and is shaped for the ROCK Pi 4SE, making it a straightforward add-on for bui...

SKU: SF-PRT-25464 · MPN: PRT-25464

This threaded hex standoff is a simple hardware spacer for mounting circuit boards, panels and small electronics assemblies.It is 0.750 in (19.05 mm) long between boards and tapped for a #4-40 screw, making it useful for lifting a PCB off a workbench or securing it inside an enclosure.Made from a...

SKU: SF-COM-29391 · MPN: COM-29391

This black 25mm potentiometer knob is a simple, sturdy control knob for adding a clean finish to panel-mounted pots and other compatible controls.It slides onto the potentiometer shaft and uses a key lock to help it hold tightly for a strong fit. The main body is metal with a plastic insert, and ...

SKU: LB-1601197103329

A compact aluminium USB-C hub that expands a single USB-C port into seven outputs — including USB 3.0, USB 2.0, and USB-C ports. Plug-and-play with no drivers required, it's a convenient way to add extra connectivity to laptops, desktops, and tablets. Key Features 7-in-1 Expansion – 1× USB 3.0...

SKU: DF-FIT0981 · MPN: FIT0981

A purpose-built active cooler for the LattePanda Mu compute module, featuring an aluminium alloy heatsink with an integrated double ball-bearing fan. The heat dissipation fins rapidly absorb CPU heat while the low-noise fan maintains stable operating temperatures under sustained workloads. Inclu...

SKU: WS-25334

A premium aluminium alloy enclosure designed specifically for the NVIDIA Jetson Orin Nano and Jetson Orin NX developer kits. Features an integrated camera holder with up to 180° roll adjustment, active and passive cooling with three-sided airflow vents, and precise cutouts for all ports and conne...

SKU: DF-FIT0530

A CNC-machined aluminium alloy enclosure designed for the LattePanda single board computer (2G/32GB and 4G/64GB models). Features anodic oxidation surface treatment for a durable, professional finish with reserved openings for a touch panel, display, and cooling fan. The internal cavity accommod...

SKU: DF-FIT0946 · MPN: FIT0946

A fanless aluminium alloy enclosure designed specifically for the LattePanda 3 Delta single board computer. The case acts as a passive heatsink, with the aluminium shell providing excellent thermal conductivity to keep the board cool without any moving parts. Includes high-quality Shin-Etsu X-23...

SKU: DF-FIT0991 · MPN: FIT0991

The Argon NEO 5 BRED is a polished aluminium case for the Raspberry Pi 5, combining passive heatsink cooling with an integrated active cooling fan. Cold air enters through intake vents and the fan circulates airflow to expel hot air, keeping your Pi 5 running cool under sustained loads. Features...

SKU: DF-FIT0949 · MPN: FIT0949

An all-metal aluminium alloy enclosure designed specifically for the LattePanda Sigma single board computer. Features a bright black anodised finish with sandblasting for a scratch-resistant, professional appearance. The wing-shaped mounting design allows the case to sit flat on a desk or be wall...

SKU: DF-FIT0697

An aluminium alloy enclosure for the Raspberry Pi 4, bundled with a cooling fan and heatsinks for effective thermal management. The hollow design promotes airflow while the aluminium construction acts as a passive heatsink, and the included fan and heatsinks provide active cooling for sustained w...