All Products

SKU: ED-6550153625646 · MPN: MK-AB-1

Air:bit 2 is a STEAM drone kit for the BBC micro:bit that students build, code and fly. It combines the approachable micro:bit platform with a hands-on drone project for learning coding, engineering and technology.Note: micro:bits are not included as standard with this kit. The supplier recommend...

SKU: ED-6968286609454 · MPN: MK-AB-FM

Keep your Air:bit flying with this service kit for replacing lost or broken parts. It is a handy spares pack for classroom, workshop or home use where small drone parts can wear out or go missing.The kit contains 12 screws, nuts and spacers, plus 2 sizes with rubber rings. It also includes propel...

SKU: ED-6550184558638 · MPN: AB-CAM

Add a live WiFi camera to your Air:bit drone so students and makers can capture images and video from a smartphone while flying.The camera connects to the Air:bit camera port and is supplied with the mounting hardware needed to fit it to the drone.The kit includes a WiFi camera for Air:bit, an Ai...

SKU: AF-4700

A compact DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 600mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contr...

SKU: AF-4699

A simple DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 500mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contro...

SKU: KI-5038

The Kitronik Air Quality Control HAT for Raspberry Pi lets you monitor, log, and react to environmental data using the BME688 sensor. It measures temperature, pressure, humidity, air quality index, and eCO2, with an on-board OLED display and ZIP LEDs for visual feedback. An RP2040 co-processor ha...

SKU: DF-SEN0233

A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemical probe for formaldehyde detection, and an integrated sensor for temperature and...

SKU: SF-PRT-30976 · MPN: PRT-30976

This fanless aluminium case gives Raspberry Pi systems a fully enclosed, passively cooled housing. The solid aluminium chassis acts as a heatsink, drawing heat away from the processor through integrated thermal pads for quiet, stable operation under sustained workloads.By using the whole enclosur...

SKU: SF-DEV-17514

The Alchitry Au+ is the upgraded version of the Alchitry Au, featuring the more powerful Xilinx Artix 7 XC7A100T FPGA with over 100,000 logic cells — nearly 3× the capacity of the standard Au. It also includes 256MB of DDR3 RAM, a Qwiic connector for I2C integration, and all the same expandabilit...

SKU: SF-DEV-27874 · MPN: DEV-27874

The Alchitry Au V2 is a powerful FPGA development board built around a Xilinx Artix 7 device. It is aimed at engineers, students and makers who are ready to move beyond microcontroller-style programming and into field-programmable gate arrays.The board breaks out 104 IO pins across two headers an...

SKU: SF-DEV-27876 · MPN: DEV-27876

The Br V2 is a simple breakout board for Alchitry boards, making the signal pins on the Alchitry headers easier to access for prototyping, wiring and soldered projects.All signal pins are brought out to 0.1" easy-to-solder holes, so you can connect jumper wires, headers or your own circuitry with...

SKU: SF-PRT-28008 · MPN: PRT-28008

This header set gives you the female headers needed to populate the prototyping area on an Alchitry Br Wide V2 Board. It includes four 2x14 headers and two 2x6 headers, all with 0.1"-spaced pins.The headers line up with the broken-out holes in the Br prototyping area, making it easier to connect ...

SKU: SF-DEV-27877 · MPN: DEV-27877

The Br V2 is a breakout board for Alchitry headers, giving you access to all the signal pins through solder-friendly 0.1" holes. It is designed to make wiring, prototyping and adding your own circuitry easier when working with an Alchitry board.This is the wide version, recommended for most uses ...

SKU: SF-DEV-16526

The Alchitry Cu is an affordable FPGA development board featuring the Lattice iCE40 HX with 7,680 logic cells. This SparkFun version adds a Qwiic connector for easy I2C sensor and actuator integration. It can be programmed using entirely open-source tools via Project IceStorm. The Cu provides 79...

SKU: SF-DEV-27875 · MPN: DEV-27875

The Alchitry Cu V2 is an accessible FPGA development board for getting started with field-programmable gate arrays without stepping up to a higher-power board. It keeps the Cu concept in the newer Alchitry V2 format, with a smaller board and updated connectors.At its core is a Lattice iCE40 HX FP...

SKU: SF-PRT-28006 · MPN: PRT-28006

Keep an FPGA board running cooler with this compact Alchitry Fn V2 cooling add-on. It uses a blower-style fan to force fresh air over the FPGA, helping manage heat in projects where the logic is working hard.The board also includes an oversized heatsink that attaches to the FPGA for extra thermal...

SKU: SF-DEV-17526

The Alchitry Ft is a high-speed Element board that adds a USB 3.0 interface to your Alchitry FPGA stack. It provides up to 200MB/s data transfer via its USB-C connector, enabling high-bandwidth communication between your FPGA and a host computer. The Ft Element features four 50-pin board-to-boar...

SKU: SF-DEV-27880 · MPN: DEV-27880

The Ft V2 is designed for Alchitry projects that need to move a lot of data in or out of a design. It is built around the FT600Q, which is capable of up to 200MB/s.In real-world use, bandwidth will be a little lower; the supplier notes they have achieved about 190MB/s from the Ft. This makes it a...

SKU: SF-DEV-27879 · MPN: DEV-27879

Add HDMI connectivity to your Alchitry Au or Pt FPGA setup with this expansion board. It provides two micro HDMI ports for video-related projects and FPGA experiments.Each HDMI port can be configured as either a source or a sink using solder jumpers, giving you flexibility when building display, ...

SKU: SF-DEV-27878 · MPN: DEV-27878

The Io V2 is an Alchitry Element Board designed for learning and experimenting with digital design on Alchitry Au and Cu FPGA development boards. It keeps the same beginner-friendly controls and indicators as the original Io, now in the Alchitry V2 form factor.On-board interactive hardware includ...