All Products

SKU: AF-5396

The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between the close-range VL6180X and the longer-range VL53L0X — all using an invisible l...

SKU: AF-5425

The Adafruit VL53L4CX is the longest-range Time-of-Flight (ToF) distance sensor in ST's VL5 series, measuring from approximately 1 mm up to 6000 mm (6 metres). It uses an invisible laser to precisely time how long light takes to bounce back, delivering accurate distance readings without the linea...

SKU: AF-3316

The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light sensor (lux), making it a versatile two-in-one module for proximity and light measure...

SKU: AF-94

The Adafruit Wave Shield adds high-quality audio playback to ATmega328-based Arduinos (Uno, Duemilanove, and compatibles). It plays uncompressed 22 KHz, 16-bit mono WAV files of any length from an SD/MMC card through an on-board 12-bit DAC, filter, and op-amp — delivering audio that's more than g...

SKU: AF-5568

The Adafruit CH9102F Friend is a USB-to-Serial converter breakout featuring the affordable WCH CH9102F chip and a modern USB Type-C connector. It uploads code at up to 3 Mbit/s and includes auto-reset for Arduino/ATmega328 boards — no manual pin manipulation needed. The pinout matches standard F...

SKU: AF-4022

Measure invisible magnetic fields with the Adafruit Wide-Range Triple-axis Magnetometer, featuring the MLX90393 sensor. With 16-bit resolution across all three axes and a dynamic range of ±5 mT to ±50 mT, this sensor is ideal for detecting magnets and magnetic orientation rather than the Earth's ...

SKU: AF-4836

Turn a Wii Nunchuck into a versatile I2C controller for your next project with the Adafruit Wii Nunchuck Breakout Adapter. It fits snugly into the Wii connector and handles level shifting and power regulation, so you can use the controller with any 3.3V or 5V microcontroller. The Wii Nunchuck co...

SKU: AF-3653

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...

SKU: AF-3654

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...

SKU: AF-6348 · MPN: ADA6348

Add reliable wired Ethernet to your microcontroller project with the Adafruit Wiz5500 Ethernet Breakout Board. The WIZ5500 chip handles TCP/IP over SPI, letting you skip the hassle of WiFi passwords and antennas for a fast, dependable network connection. The breakout includes full level shifting...

SKU: AF-2922

Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...

SKU: AF-701

Celebrate Ada Lovelace — one of the world's first computer programmers — with this glossy vinyl sticker. Featuring a full-colour woodcut-style portrait based on the nineteenth century A. E. Chalon painting, this sticker is perfect for laptops, workbenches, or anywhere you want to honour a pioneer...

SKU: SF-CAB-14093

The Adam Tech Wall Adapter Cable (EU) provides a safe, ready-made connection between a European mains outlet and compatible power supplies. Terminated with a standard CEE 7/7 plug at one end and three colour-coded insulated spade terminal connectors at the other, it's designed for use with Mean W...

SKU: EF-EF05052 · MPN: EF05052

A GPIO adapter board for the ELECFREAKS PlanetX sensor ecosystem. Allows PlanetX sensors to be connected to standard GPIO pins via RJ11 cables, bridging the PlanetX system with breadboards and other microcontroller setups. Note: Requires an RJ11 4P4C cable and a Nezha expansion board (sold sepa...

SKU: LB-00315

Ada Twist, Scientist is a picture book by Andrea Beaty and illustrated by David Roberts. Ada has always been insatiably curious — why are there pointy things on a rose? Why are there hairs growing inside your nose? When a mysterious smell fills her house, Ada embarks on a scientific investigation...

SKU: AF-3974

This kit turns a Raspberry Pi 3 into a network-wide ad blocker using Pi-hole, an open-source DNS sinkhole. Once set up, Pi-hole blocks advertisements and tracking domains for every device on your network — computers, tablets, phones — without requiring ad-blocker plugins on individual devices. T...

SKU: PL-3089

Add vibrant, individually addressable RGB lighting to your project with this 1-metre SK9822 LED strip. Featuring 60 LEDs with integrated drivers, each pixel can be independently controlled for colour and brightness over a standard SPI interface — no strict timing requirements like one-wire protoc...

SKU: PL-2527

Add individually addressable RGB lighting to your project with this 2-metre SK6812 LED strip. Featuring 60 LEDs controlled via a one-wire interface, each pixel can display any colour independently. The flexible, waterproof strip runs on 5V and is compatible with WS2812B protocols. Strips can be ...

SKU: LB-LR0214-108A

Create eye-catching circular lighting effects with this 24-LED addressable RGB ring. Each of the 24 WS2812 LEDs can be individually controlled for colour and brightness, making it perfect for interactive displays, wearable projects, and rotary encoder feedback. Compatible with the Adafruit NeoPix...

SKU: PL-2535

A pack of 10 addressable RGB LEDs in a familiar 5mm through-hole form factor. Each LED contains an integrated WS2811 driver, allowing you to control the colour of every LED individually using just one microcontroller pin. Chain them together for stunning lighting effects. Unlike standard LEDs, t...