All Products

SKU: EF-EF08300

The ELECFREAKS AI Accessories Pack brings advanced AI technology to young learners through hands-on programming projects. It includes an intelligent AI Lens capable of face, ball, colour, and card recognition, plus line-following and one-click learning functions. A voice recognition sensor respon...

SKU: AF-5243

The AideTek Box-All is a heavy-duty ESD-safe modular storage box with 144 individual compartments, each with its own clear pop-open cover. Keep only the compartments you need open to prevent mixing up parts or accidental spills — ideal for organising SMT/SMD components. The anti-static construct...

SKU: AF-4700

A compact DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 600mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contr...

SKU: AF-4699

A simple DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 500mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contro...

SKU: KI-5038

The Kitronik Air Quality Control HAT for Raspberry Pi lets you monitor, log, and react to environmental data using the BME688 sensor. It measures temperature, pressure, humidity, air quality index, and eCO2, with an on-board OLED display and ZIP LEDs for visual feedback. An RP2040 co-processor ha...

SKU: DF-SEN0233

A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemical probe for formaldehyde detection, and an integrated sensor for temperature and...

SKU: SF-DEV-17514

The Alchitry Au+ is the upgraded version of the Alchitry Au, featuring the more powerful Xilinx Artix 7 XC7A100T FPGA with over 100,000 logic cells — nearly 3× the capacity of the standard Au. It also includes 256MB of DDR3 RAM, a Qwiic connector for I2C integration, and all the same expandabilit...

SKU: SF-DEV-16526

The Alchitry Cu is an affordable FPGA development board featuring the Lattice iCE40 HX with 7,680 logic cells. This SparkFun version adds a Qwiic connector for easy I2C sensor and actuator integration. It can be programmed using entirely open-source tools via Project IceStorm. The Cu provides 79...

SKU: SF-DEV-17526

The Alchitry Ft is a high-speed Element board that adds a USB 3.0 interface to your Alchitry FPGA stack. It provides up to 200MB/s data transfer via its USB-C connector, enabling high-bandwidth communication between your FPGA and a host computer. The Ft Element features four 50-pin board-to-boar...

SKU: SF-SEN-08880

The MQ-3 is an alcohol gas sensor suitable for detecting alcohol concentration in the air, similar to a breathalyser. It provides an analog resistive output based on alcohol concentration, with high sensitivity and fast response time. The drive circuit is simple — just one resistor is needed, and...

SKU: PL-1634

The MQ-3 is a semiconductor gas sensor that detects alcohol vapour at concentrations from 0.04 mg/L to 4 mg/L — a range suitable for building a breathalyser. It provides a simple analog voltage output that requires only one analog input pin from your microcontroller. Key Features Alcohol Detec...

SKU: LB-LR0205

An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module also responds to LPG, natural gas, city gas, and smoke. The board features a pow...

SKU: SF-WRL-19956

The ALFA Network AHPI7292S is the world's first WiFi HaLow (802.11ah) HAT for Raspberry Pi. Similar to LoRa, WiFi HaLow operates in the sub-gigahertz 915MHz band, providing long-range, low-power wireless communication with WiFi-style connectivity. It supports up to 15Mbps throughput in both stand...

SKU: DF-FIT0191

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The adhesive bond is strong and long-lasting. Suitable for stepper motor drivers (suc...

SKU: DF-FIT0223

A medium-sized aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The adhesive bond is strong and long-lasting. Suitable for stepper motors, motor...

SKU: DF-FIT0339

A 5-piece hex driver set with interchangeable screwdriver heads and an aluminium alloy CNC-machined handle. The HSS high-alloy steel tips are wear and distortion resistant, making this set ideal for precision work on electronics, RC helicopters, drones, and small mechanical assemblies. The handl...

SKU: AF-1321

A standard alkaline 9V battery for powering portable electronics projects, kits, and prototypes. These batteries use alkaline (MnO2) chemistry with a voltage range of 9.6V (fresh) to 4.8V (depleted). At a 50mA discharge rate, capacity is approximately 500mAh. Specifications Chemistry – Alkalin...

SKU: AF-617

A 2-pack of standard alkaline AAA batteries for powering portable electronics, kits, and projects. These use alkaline (MnO2) chemistry with a voltage range of 1.6V (fresh) to 0.8V (depleted) and a capacity of approximately 1200mAh at a 25mA discharge rate. Specifications Type – AAA Chemistry ...

SKU: AF-3520

A 3-pack of standard alkaline AAA batteries for powering portable electronics, kits, and projects. These use alkaline (MnO2) chemistry with a voltage range of 1.6V (fresh) to 0.8V (depleted) and a capacity of approximately 1200mAh at a 25mA discharge rate. Specifications Type – AAA Chemistry ...

SKU: AF-3521

A 3-pack of standard alkaline AA batteries for powering portable electronics, kits, and projects. These use alkaline (MnO2) chemistry with a voltage range of 1.6V (fresh) to 0.8V (depleted) and a typical capacity of approximately 3000mAh. Specifications Type – AA (LR6) Chemistry – Alkaline (M...