All Products
Showing 1-20 of 22 products
IDC Breakout Helper - 2x20 (40 pin)
·
The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins). It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the c...
IDC Breakout Helper - 2x13 (26 pin)
·
The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard o...
IDC Breakout Helper - 2x8 (16 pin)
·
This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...
IDC Breakout Helper - 2x3 (6 pin)
·
This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...
IDC Breakout Helper - 2x5 (10 pin)
·
This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre of a breadboard and a male header that plugs into the top of the socket. A prac...
2x20 pin IDC Box Header - Raspberry Pi A+/B+/Pi 2/Pi 3
·
This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's GPIO, or use it in any custom PCB design. Key Features 40-Pin (2×20) – Match...
DIN Rail 2x20 IDC to Terminal Block Adapter Breakout
·
This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x20 IDC cable to this very PCB, which can be DIN rail-mounted. Then, all 40 pins are broken out into terminal blocks, so...
40-pin GPIO Ribbon Cable for Raspberry Pi - Black
A 175mm black GPIO ribbon cable for Raspberry Pi, with 40-pin female IDC connectors on both ends. Bridges your Pi's GPIO header out to a breakout board, breadboard adapter, or custom PCB. Pin 1 is marked with a white/pink wire for correct orientation. Key Features Female-to-Female – 2×20 IDC s...
40-pin GPIO Ribbon Cable for Raspberry Pi - Grey
A 175mm grey GPIO ribbon cable for Raspberry Pi, with 40-pin female IDC connectors on both ends. Bridges your Pi's GPIO header out to a breakout board, breadboard adapter, or custom PCB. Pin 1 is marked with a white/pink wire for correct orientation. Key Features Female-to-Female – 2×20 IDC so...
Adafruit GPIO Expander Bonnet - 16 Additional I/O over I2C
·
The Adafruit GPIO Expander Bonnet adds 16 extra digital I/O pins to your Raspberry Pi over I²C. Based on the MCP23017 chip, it plugs directly onto the Pi's 40-pin header and communicates via SDA/SCL, leaving your other GPIO pins free. Each pin can be configured as a digital output (up to 20 mA pe...
Raspberry Pi GPIO Ribbon Cable - 40-pin, 6 (RPi 3, RPi2, B+)
This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you room to work with breadboards, breakout boards, and HATs. The cable uses standard ...
10-pin IDC Socket Rainbow Breakout Cable
·
A breakout cable with a 10-pin IDC socket connector on one end and individual 0.1" female socket pins on the other, connected by 6 inches (150mm) of colour-coded rainbow ribbon cable. Useful for breaking out 10-pin headers to individual connections on a breadboard or test setup. Key Features 1...
26-pin GPIO Cable for Raspberry Pi Model A/B - Grey / 150mm
A 26-pin (2×13) GPIO ribbon cable for connecting the original Raspberry Pi Model A or Model B to breakout boards, breadboards, and other PCBs. Pin 1 is marked with a red wire for easy orientation. Note: This cable is only compatible with the original Raspberry Pi Model A and Model B (26-pin GPI...
26-pin GPIO Cable for Raspberry Pi Model A/B - Black / 150mm
A 26-pin (2×13) GPIO ribbon cable for connecting the original Raspberry Pi Model A or Model B to breakout boards, breadboards, and other PCBs. Pin 1 is marked with a red wire for easy orientation. Note: This cable is only compatible with the original Raspberry Pi Model A and Model B (26-pin GPI...
GPIO Ribbon Cable 2x10 IDC Cable - 20 pins 12" long
·
This 20-pin GPIO ribbon cable provides a clean, reliable connection between PCBs, development boards, and breakout headers. The soft, flexible 0.05″ ribbon cable with keyed IDC connectors on both ends ensures correct orientation every time. Pin 1 is marked with a pink stripe along the side of th...
40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter
·
A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...
40-pin FPC to Straight 2x20 IDC Female Socket Header
·
A 40-pin FPC to straight 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket directly...
40-pin FPC to Right Angle 2x20 IDC Female Socket Header
·
A 40-pin FPC to right-angle 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket direc...
Matrix Portal S3 for HUB75 RGB Matrices - u.FL
·
Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...
Adafruit Matrix Portal S3 CircuitPython Powered Internet Display
The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compatible matrix — no soldering or wiring required. Just attach power and start codi...
