All Products
Showing 1-20 of 86 products
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
·
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...
BitGadget Kit - Grove Creator Kit for Micro:bit with Free Course
Description BitGadget Kit is a must-have for micro:bit intermediate learners.The included micro:bit expansion board, BitMaker incorporates six Grove connectors, one RGB LED strip and one buzzer to make it possible for some beginners to still use the micro:bit without purchasing extra modules.If...
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...
Arduino Sensor Kit
Arduino Sensor Kit is made for Makers who have just started using Arduino to explore the vast space of electronics and programming. This kit teaches how to connect and program basic Grove modules that includes both sensors and actuators. Grove is an open-source, modulated, and ready-to-use toolse...
NeoFlash Acrylic Light Board
Description NEOFLASH is a RGB LED panel with 192 RGB LED(24x8). When you program this Unit, please pay attention to the sequence of the Neopixels. From top left (Where PIR placed) to right, and top to bottom. Connect this unit with M5Core via GROVE PORTB Single-Bus. We put Magnet on the bac...
Fish-eye Camera Module (OV2640)
The M5CameraF is a compact ESP32-based camera module featuring a 2-megapixel OV2640 sensor with a 160° fish-eye lens. With built-in Wi-Fi and Bluetooth, it streams images over a wireless connection and can be programmed via USB Type-C. The module includes 4 MB flash, 4 MB PSRAM, and comes preload...
RB Link
The RBLink is a development and debugging board for the RedBear Duo, designed for use with the Broadcom WICED SDK. It features an ST-LINK/V2 debugger, USB drag-and-drop programming, and eight Grove-compatible connectors for rapid prototyping with Seeed's Grove sensor and actuator modules. With s...
Grove Starter Kit for Seeed Studio XIAO
The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introduction to the XIAO development platform. Designed for beginners, it comes with free online courses to help you get started quickly. The kit cove...
180° Infrared Refletive Unit (ITR9606)
The OP.180 is an infrared reflective limit switch unit built around the ITR9606 sensor, which pairs an infrared emitting diode with a silicon phototransistor in a 180° (straight-through) orientation. When an object passes between the emitter and receiver, the IR beam is broken, triggering a digit...
Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic
·
The Adafruit MCP2221A Breakout lets your computer talk directly to I2C devices, sensors, and GPIO — no microcontroller required. Drive an OLED display, read a colour sensor, flash LEDs, or read buttons straight from Python on Mac, Windows, or Linux. The MCP2221A from Microchip provides USB-to-I2...
Devicter Relay 1 Node V1.0 (ATmega 328) – with support OTA update
The devDuino Relay 1 Node V1.0 is a compact Arduino-compatible microcontroller board with a built-in mains power supply (110–220 V AC), a 10 A relay, and an nRF24L01+ wireless transceiver. It is designed for building wireless home automation networks with support for over-the-air (OTA) firmware u...
Seeed Studio XIAO ESP32S3 Sense
Seeed Studio XIAO Series are diminutive development boards, sharing a similar hardware structure, where the size is literally thumb-sized. The code name "XIAO" here represents its half feature "Tiny", and the other half will be "Puissant".Seeed Studio XIAO ESP32S3 Sense integrates a camera sensor...
Grove - Sound Sensor
The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer. Features Grove compatible interface Wide supply vo...
ESP32 GREY Development Kit with 9Axis Sensor
Description M5Stack GRAY Kit is from one of the M5Stack development kit series, it’s a upgrade from the Basic kits. In comparison, Gray kit provide a extra IMU sensor, MPU6886+BMM150. With a IMU posture sensor, you can include posture detection in your work : accelerated speed, angulation...
Adafruit Grove and Stemma QT FeatherWing for all Feathers
·
The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...
Mini Heart Rate Unit (MAX30100)
Description HEART is build with MAX30100.. MAX30100 is a complete pulse oximetry and heartrate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides very small total solution size without sacrificing optical or electrical perform...
Adafruit BrainCraft HAT - Machine Learning for Raspberry Pi 4
·
The Adafruit BrainCraft HAT is a Raspberry Pi 4 add-on board designed for machine learning and AI projects at the edge. It combines a display, stereo microphones, audio output, camera connector, user controls, and sensor ports into a single HAT, providing everything needed to build audio and vide...
Experimental Proto Board Set include DHT12 Bus Socket
Description In comparision,**PROTO function Module** includes more stuff than PROTO Board.Other than the PROTO board, it also comes with a DHT12(temperature and humility sensor), M-BUS Socket and more. PROTO Board is a pure universal prototype perboard. You can have the total free...
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
·
This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, or any standard 0.1″ pitch connection. Key Features JST PH to Male Headers – ...
2.54mm Mini Proto Unit 70 Holes
The M5Stack Proto Unit is a compact universal prototyping board designed for the M5Stack ecosystem. It connects to an M5Stack Core via the Grove port, giving you the freedom to build custom circuits and add-ons for your projects on a standard 2.54mm pitch perfboard. Key Features 70 Through-Hol...
