All Products
Showing 1-20 of 46 products
DFRobot Mega 2560 V3.0 (Arduino Mega 2560 R3 Compatible)
The DFRobot Mega 2560 V3.0 is a fully compatible Arduino Mega 2560 R3 microcontroller board based on the ATmega2560. It features 54 digital I/O pins (14 with PWM), 16 analog inputs, 4 hardware serial ports, and a 16 MHz crystal oscillator. Connect via USB or power with a 7–12 V adapter or battery...
DFRduino Mega1280 (Arduino Mega Compatible)
DFRduino Mega1280 is a microcontroller board based on the ATmega1280. It has 54 digital input/output pins, 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. Because it has bootloader, it can download...
Bluno Mega 2560 - An Arduino Mega 2560 with Bluetooth 4.0
The Bluno Mega 2560 combines the ATmega2560 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module, bringing wireless communication to the Arduino Mega form factor. It supports wireless programming over BLE, Bluetooth HID, iBeacon, and serial pass-through — while remaining fully ...
32x32 RGB LED Matrix panel (4mm pitch)
A 32×32 full-colour RGB LED matrix panel with 1024 individually addressable pixels at 4mm pitch. Each LED can display any colour, making this panel suitable for text, animations, and graphics. The high-brightness LEDs and wide 160° viewing angle work well for both indoor and outdoor installations...
32x16 RGB LED Matrix Panel (6mm pitch)
A 32×16 full-colour RGB LED matrix panel with 512 individually addressable pixels at 6mm pitch. Each LED can display any colour, making this panel suitable for text, animations, and graphics. The high-brightness LEDs and wide 160° viewing angle work well for both indoor and outdoor installations....
Ethernet Shield for Arduino - W5200
An Arduino-compatible Ethernet shield based on the Wiznet W5200 chip, providing a simple way to connect your Arduino to a network. It plugs directly onto an Arduino Uno or Mega 2560 and supports stacking additional shields on top. An aluminium alloy heatsink is fitted to the W5200 chip for therma...
Mega Multi IO Shield For Arduino Mega / DUE
The Mega Multi IO Expansion Shield lets you stack up to four shields simultaneously on an Arduino Mega or Due without worrying about I/O pin conflicts. All Mega I/O pins are expanded and routed to four separate shield slots, keeping your project clean and tidy with organised cabling. Key Feature...
64x32 Flexible RGB LED Matrix-4mm Pitch
A flexible 64×32 RGB LED matrix with 4mm pixel pitch, built on a thin bendable PCB that can conform to curved surfaces. With a panel size of 256 × 128mm and 2048 individually addressable RGB LEDs, it's an excellent choice for creative display projects where rigid panels won't fit. Features two I...
DFRduino Ethernet Shield V2.1 (Support Mega and Micro SD)
The DFRduino Ethernet Shield V2.1 is now released. This version of Ethernet Shield is not only compatible with Mega 1280 and 2560, but also provides a Micro SD card slot for reading/writing. DFRduino Ethernet Shield V2.1 is fully compatible with Ardunio Ethernet Shield. With the offical e...
2x2A Arduino Motor Shield Twin
The DFRobot 2×2A Motor Shield uses the L298P dual full-bridge driver chip to control two 4.8–35 V DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 10 and 11 for speed control and digital pins 12 and 13 for enable/disable. The shield ...
2x2A DC Motor Shield For Arduino
The DFRobot 2×2A DC Motor Shield uses the L298P dual full-bridge driver chip to control two DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 5 and 6 for speed control and digital pins 4 and 7 for enable/disable. The shield can be pow...
Arduino RS232 Shield
This RS232 Shield For Arduino is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The RS232 shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 shield headers will facilitate your co...
Dual Bipolar Stepper Motor Shield for Arduino (DRV8825)
INTRODUCTION Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors vi...
Gravity: IO Sensor Shield For Arduino Mega Due
Say goodbye to messy cables and clueless pluging/unpluging! This Sensor Shield is a powerful expansion shield for Arduino Mega Due. It is large enough to carry up to 3 Xbee slots, 1 microSD slot and shield headers for most Arduino shields on the market. Besides, we also added a prototyping ar...
Bluno Bee - Turn Arduino to Bluetooth 4.0 (BLE) Board
Bluno Bee is a serial to bluetooth 4.0 module, it adopts XBEE form factor which is compact and is compatible with all shields with XBEE socket. Bluno Bee is designed to have voltage regulator which supports both 5V and 3.3V MCUs. Bluno Bee is talking to your Arduino serial port , and abl...
2x1A DC Motor Shield for Arduino
The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for motor control with PWM speed support. Key Features Dual Motor Drive – Control tw...
Gravity: Arduino DC Micro Metal Gear Motor w/Driver - 30:1
INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing and frustrating when you ju...
64x32 RGB LED Matrix Panel (4mm pitch)
The 64×32 RGB LED Matrix Panel with 4mm pitch from DFRobot features 2048 full-colour RGB LEDs, each independently controllable. With its slim 11mm profile and durable construction, this panel is suitable for both indoor and outdoor use in harsh environments. The panel features two IDC connectors...
Gravity: DC Micro Metal Gear Motor w/Driver - 50:1
INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing an...
64x64 RGB LED Matrix Panel (3mm pitch)
The 64×64 RGB LED Matrix Panel with 3mm pitch from DFRobot features 4096 full-colour RGB LEDs, each independently controllable. With its slim 11mm profile, high brightness, and durable construction, this panel is suitable for both indoor and outdoor use in harsh environments. The panel features ...
