All Products

SKU: AF-873 · MPN: 873

Here's a sticker for the MENTA, a portable minty Arduino-compatible project that fits into a common mint tin. The sticker is sized perfectly for our Altoids-size tin (tin not included). All MENTA orders (placed after 6/22/12) now contain this sticker. These gorgeous stickers are high qua...

SKU: AF-723 · MPN: 723

The Adafruit Perma-Proto Mint Tin Size Breadboard PCB is shaped to fit perfectly inside a standard Altoids-style mint tin — ideal for compact, enclosed projects. It features 30 rows of 5-hole connected pads in a familiar breadboard layout, plus 80 additional wiring holes around the edges for gene...

SKU: AF-1214 · MPN: 1214

A pack of three Adafruit Perma-Proto Small Mint Tin Size Breadboard PCBs, shaped to fit inside an Altoids "Smalls"-sized mint tin. Each board provides 15 rows of 5-hole connected pads in a breadboard layout, two central power bus lines, and 48 additional wiring holes around the edges — ideal for ...

SKU: AF-571 · MPN: 571

A value pack of three Adafruit Perma-Proto Half-Sized Breadboard PCBs. Each board mirrors the layout of a standard half-size solderless breadboard with 30 rows of 5-hole connected pads, four power bus rails, and clear silkscreen labelling — making it simple to transfer prototyped circuits to a pe...

SKU: AF-1609 · MPN: 1609

The Adafruit Perma-Proto Half-Sized Breadboard PCB mirrors the layout of a standard half-size solderless breadboard, making it simple to transfer prototyped circuits to a permanent soldered board. With 30 rows of 5-hole connected pads, four power bus rails, and clear silkscreen labelling, your co...

SKU: AF-4076 · MPN: 4076

If you have a custom PCB design and you'd like to add a little Bluetooth Low Energy, this module is ultra compact and easy to use. It contains a Nordic nRF51822 Cortex M0 chip that comes integrated with BLE radio as well as most of the supporting circuitry and even a chip antenna. The whole thing...

SKU: AF-1310 · MPN: 1310

A 50 × 50 mm glass sheet coated on one side with Indium Tin Oxide (ITO) — a transparent, electrically conductive film. The same material is used in LCD/OLED manufacturing and scientific research. Experiment with creating conductive traces by scraping away the ITO coating, or explore transparent e...

SKU: AF-5318 · MPN: 5318

If you want the look and feel of aeronautical style quick-release connectors, this FGG.0B 4-pin Plug is an elegant and inexpensive alternative to official LEMO-C connectors. Sure, they're not mil-spec but they do work and look great for DIY projects, keyboard builds, robotics, wearables, and more...

SKU: AF-715 · MPN: 715

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...

SKU: AF-94 · MPN: 94

The Adafruit Wave Shield adds high-quality audio playback to ATmega328-based Arduinos (Uno, Duemilanove, and compatibles). It plays uncompressed 22 KHz, 16-bit mono WAV files of any length from an SD/MMC card through an on-board 12-bit DAC, filter, and op-amp — delivering audio that's more than g...

SKU: AF-5255 · MPN: 5255

The Adafruit LED Glasses Starter Kit includes everything you need to build a complete pair of programmable LED glasses. Pair the 116-LED front panel with the Bluetooth-enabled nRF52840 driver board, snap them onto the included fashion frames, and you're ready to create dazzling wearable light dis...

SKU: AF-6332 · MPN: ADA6332

The Adafruit Sparkle Motion Stick is a compact USB-A dongle version of the Sparkle Motion smart LED driver, designed for WLED projects that need a small, portable form factor. Powered via USB Type A at up to 5V 2A, it works with off-the-shelf USB battery packs for portable operation. The ESP32 m...

SKU: AF-6333 · MPN: ADA6333

The Adafruit Sparkle Motion Stick is a compact USB-A dongle version of the Sparkle Motion smart LED driver, designed for WLED projects that need a small, portable form factor. This kit includes both the Sparkle Motion Stick and a snap-on enclosure with a button lever and USB port cap. Powered vi...

SKU: AF-3149 · MPN: 3149

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in white pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 ...

SKU: AF-3151 · MPN: 3151

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in green pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 ...

SKU: AF-3153 · MPN: 3153

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in yellow pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33...

SKU: AF-3152 · MPN: 3152

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in red pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 I2...

SKU: AF-4242 · MPN: 4242

The Adafruit PyGamer is a pocket-sized, open-source gaming handheld built for DIY game development and retro emulation. Powered by the ATSAMD51 running at 120 MHz with 512 KB flash and 192 KB RAM, it features an analog thumbstick, six tactile buttons, a colour TFT display, and stereo audio — all ...

SKU: AF-4819 · MPN: 4819

The Adafruit MagTag Starter Kit bundles everything you need to get started with the MagTag WiFi E-Ink display. The ESP32-S2-powered board features a 2.9" grayscale E-Ink screen that retains its image even when power is removed — perfect for low-power IoT dashboards, status boards, and information...

SKU: AF-2077 · MPN: 2077

The Adafruit Proto Shield for Arduino (R3) is a versatile prototyping shield with a 0.1" grid, power rails, indicator LEDs, and stacking headers — everything you need to build custom circuits on top of your Arduino. Version R3 is compatible with virtually all Arduino boards including UNO, Mega, L...