All Products
Showing 1-20 of 27 products
Camcorder Battery Holder/Adapter for Sony NP-F750 w/ DC Jack
·
A snap-in battery holder for Sony NP-F series camcorder batteries, with a pre-attached 2.1 mm DC barrel plug for powering 7 V DC devices. Clip in a compatible Li-Ion battery pack and connect directly to robots, Arduino projects, LED panels, or any device with a standard DC jack — no soldering or ...
DS-929MG Digital Servo
The DS-929MG is a compact, metal-geared digital servo that delivers reliable performance at an excellent price point. With high-resolution positioning and fast response times, it's a versatile all-rounder for robotics, RC, and embedded projects. Key Features Metal Gearing – Durable metal gears...
RoboClaw 2x60AHV, 60VDC Motor Controller (V6)
·
The RoboClaws from Basicmicro (formerly Ion Motion Control) are a family of efficient, versatile, synchronous regenerative motor controllers. They can supply brushed DC motors with 7.5 A, 15 A, 30 A, 45 A, 60 A, or 120 A continuous (depending on the model) at voltages from 6 V to 34 V or 10.5 V t...
7" LCD Wired Video Doorphone
This wired video doorphone system includes a full-colour 7" LCD indoor monitor with touch-button controls and a weatherproof alloy metal outdoor camera unit. The system provides clear identification of visitors day and night thanks to 6 infrared LEDs with 1 m night vision range and a 700 TVL CMOS...
433Mhz Serial RF Module HC-12 (1000M)
The HC-12 is a multi-channel embedded wireless serial port module operating in the 433.4–473.0 MHz band. With up to 100 mW (20 dBm) transmit power and −117 dBm receiving sensitivity, it achieves communication distances of up to 1,000 metres in open space at 5,000 bps air baud rate. A built-in MC...
Re-programmable USB Type-C PD to 2.1/5.5mm Barrel Jack Cable
·
A re-programmable USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a configurable DC barrel jack output. Programme the built-in PD sink negotiation chip to request 5 V, 7 V, 9 V, 10 V, 12 V, 15 V, or 20 V at up to 2 A — replacing the need for multiple wal...
Thumbnail Sized DC Motor Driver 2x1.5A (HR8833)
INTRODUCTION This is a ultra compact size Dual-H-Bridge dc motor driver (Based on HR8833), which could drive two way 1.5A DC brush motors up to 10V . It has the same footprint as your thumbnail suitable for projects with limited spaces. Both sides of the module are ...
SparkFun Breadboard Power Supply Stick - 3.3V/1.8V
The SparkFun Breadboard Power Supply Stick provides clean, regulated 3.3 V or 1.8 V power directly to your breadboard. It accepts 4–9 V input via a DC barrel jack or 2-pin header, and outputs regulated voltage through pins spaced to power both rails of a standard full-size breadboard simultaneous...
1.75mm 1Kg 3D Printer PLA Filament (Sky Blue)
A 1 kg spool of sky blue PLA filament in the standard 1.75 mm diameter, suitable for most desktop 3D printers. The larger spool size is ideal for bigger prints and extended use. PLA (Polylactic Acid) is a biodegradable thermoplastic derived from renewable resources such as corn starch and sugarc...
434Mhz Serial RF Module HC-11 (1-40M)
The HC-11 is a low-cost, high-performance FSK transceiver module operating at 434 MHz, designed for transparent wireless serial communication. With a UART/TTL interface, it handles all RF protocol processing internally — simply send serial data in and it appears wirelessly at the receiving module...
DC-DC Automatic Step Up-down Power Module (2.5~15V to 3.3V 600mA)
This compact DC-DC buck-boost converter automatically steps voltage up or down to deliver a stable 3.3 V output from a wide 2.5–15 V input range. With a maximum output current of 600 mA and ultra-low 180 µA quiescent current, it's perfect for battery-powered projects and embedded systems that nee...
SparkFun Breadboard Power Supply Stick - 5V/3.3V
A simple breadboard power supply that takes a 6–12 V input and outputs a regulated 5 V or 3.3 V. All headers are at 0.1" pitch for direct insertion into a standard breadboard, with the output pins spaced to power both breadboard power rails simultaneously. Input power connects via the DC barrel ...
SparkFun Brushless Motor Driver - 3-Phase (TMC6300)
The SparkFun 3-Phase Brushless Motor Driver, featuring the TMC6300 from ADI + Trinamic, is a powerful and easy-to-use three-phase motor driver that was designed to control our Brushless Gimbal Motor. It can be used to control any 3-phase BLDC or PMSM motor with up to 2A (1.4ARMS) of total driv...
Battery Holder - 1x18650 (wire leads)
A single-cell 18650 battery holder with wire leads for easy integration into projects. Drop in an 18650 lithium-ion cell and connect the bare wire leads to your circuit — no soldering to the battery required. Two 6" (150 mm) cables exit from opposite ends of the holder, terminated with bare wire...
1660 point breadboard
A large 1660-point solderless breadboard with plenty of room for advanced prototyping. Features a sturdy black aluminium backing plate, three binding posts for external power connections, and accepts a wide range of wire gauges. Key Features 1660 Tie Points – 1260 across two terminal strips pl...
830-Point Breadboard
This full-size 830-point solderless breadboard provides 63 rows of tie points with four bus lines spanning the full length of the board. It accommodates up to nine 14-pin DIP ICs or seven 16-pin DIP ICs, and labelled rows and columns make wiring easy to follow. Multiple breadboards can be connec...
GFX HAT - 128x64 LCD Display with RGB Backlight and Touch Buttons
A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects. GFX HAT riffs off our beloved Display-O-Tron HAT, but gives you the flexibility of individual pixels, letting you d...
Luckfox 21.5" Portable Monitor – 1920x1080, 120Hz, IPS, Type-C, Stand
·
Elevate your mobile productivity and entertainment with the Luckfox 21.5-inch Portable Monitor, a sleek and versatile display solution that's perfect for professionals, gamers, and multi-device users alike. With its 1920 × 1080 Full HD resolution, 120Hz high refresh rate, and expansive 178° viewi...
SparkFun Tristimulus Color Sensor - OPT4048DTSR (Qwiic)
The SparkFun Tristimulus Color Sensor is built around the Texas Instruments OPT4048DTSR — a high-speed, high-precision four-channel colour sensor. Three channels closely match the CIE 1931 tristimulus XYZ spectra with excellent IR rejection, while a fourth wide-band channel provides broad spectra...
pi-top without Raspberry Pi 3 Grey
Does NOT include Raspberry Pi 3. The Raspberry Pi open source laptop that you've been waiting for has arrived with the Pi-Top! With this kit you can build your very own "laptop" which at it's core runs off of the famous Raspberry Pi.The laptop case comes with a screen, base top, base bottom, a...
