All Products

SKU: AF-5987 · MPN: ADA5987

The Adafruit RS232 Pal provides two duplex channels of UART-to-RS-232 level shifting in a compact breakout board. Built around the trusted TI MAX3232E, it handles the positive and negative voltage generation internally and supports communication at up to 250 Kbps on 3.3 V power and logic. With t...

SKU: AF-5959 · MPN: ADA5959

The Adafruit S-35710 Wake Up Timer Breakout is an ultra-low-power watchdog timer that can be programmed to trigger an alarm from 1 second up to 194 days, using a 24-bit second counter. Drawing only 0.2 µA, it's an interesting alternative to a real-time clock for projects that need a separate, ind...

SKU: AF-4867

The Adafruit SCD-30 is a true NDIR (Non-Dispersive Infrared) CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. With an integrated SHT31 temperature and humidity sensor, it provides comprehensive environmental ...

SKU: AF-5187

The Adafruit SCD-40 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. It also includes integrated temperature and humidity sensing, providing comprehensive environmental data from a com...

SKU: AF-5190

The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and humidity sensing, providing comprehensive environmental data from a compact modu...

SKU: AF-5964 · MPN: ADA5964

The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding required. The adapter handles the SEN5x's special cable connection and 5 V power req...

SKU: AF-6331 · MPN: ADA6331

The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding required. The adapter handles the SEN6x's special cable connection and power requ...

SKU: AF-4885

The Adafruit Sensirion SHT40 is a high-accuracy temperature and humidity sensor featuring a true I2C interface for simple two-wire communication. Part of the fourth generation of Sensirion's acclaimed SHT sensor family, it delivers excellent measurement precision in a compact, easy-to-use breakou...

SKU: AF-5776

The Adafruit Sensirion SHT41 is a high-accuracy temperature and humidity sensor with a true I2C interface, part of Sensirion's fourth-generation SHT4x family. Compared to the SHT40, the SHT41 offers significantly better accuracy across the full humidity range — ±2% typical over 0–100% RH versus t...

SKU: AF-5665

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. This version does not include a PTFE membrane, making it suitable for clean indoor environments where dust and water prote...

SKU: AF-2857

The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface and PTFE filter for protection against dust and contaminants. Part of Sensirion's third-generation SHT sensor family, it delivers ±2% relative humidity and ±0.3 °C temperature accuracy for ...

SKU: AF-4829

The Adafruit SGP40 is a next-generation MOX (metal-oxide) gas sensor from Sensirion for indoor air quality monitoring. Unlike its predecessor the SGP30, the SGP40 outputs a raw signal that is processed through Sensirion's VOC algorithm to produce an overall air quality index from 0 to 500 — rathe...

SKU: AF-5912 · MPN: ADA5912

The Adafruit SHT41 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with a Sensirion SHT41 temperature and humidity sensor. Simply plug it into any USB A port on your computer and start reading environmental data — no wiring, soldering, or driver installation required. Th...

SKU: AF-2045

The Adafruit Si5351A Clock Generator Breakout lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. With a precision 25 MHz crystal reference and internal PLLs and dividers, it eliminates the need to hunt for specific crystals or oscillato...

SKU: AF-5640

The Adafruit Si5351A Clock Generator with STEMMA QT lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. This updated version adds STEMMA QT / Qwiic connectors for solderless hookup alongside the traditional breadboard headers. With a pr...

SKU: AF-3251

The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperature accuracy from −10 to +85 °C, all communicated over a simple I2C interface. ...

SKU: AF-2716

The Adafruit SPW2430 Silicon MEMS Microphone Breakout is a compact, low-cost microphone module that detects sound and converts it to an analog voltage — no external bias resistor or amplifier needed. With a frequency range of 100 Hz to 10 kHz, it's well suited for general-purpose audio recording,...

SKU: AF-5021

The Adafruit Slider Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a pre-soldered 35 mm slide potentiometer and two NeoPixel LEDs. Plug it into any USB A port on your computer and program it as a volume control, brightness adjuster, colour picker, or any custom slide...

SKU: AF-1162

The Adafruit SMT Breakout PCB for 44-pin QFN or TQFP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 44-pin QFP footprint while the other supports 44-pin QFN, with traces routed to two rows of 0.1"-spaced through-holes. Key ...

SKU: AF-1211

The Adafruit SMT Breakout PCB for 12-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 12-pin TSSOP footprint while the other supports 12-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...