All Products
Showing 821-840 of 8855 products · 2586 unavailable products hidden
5mm Plastic Bevel LED Holder - Pack of 5
·
Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a bevelled finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The bevelled bezel gives a clean, finished look on any panel or enclosure. Key Features Sn...
5mm Plastic Flat LED Holder - Pack of 5
·
Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a flat finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The flat bezel sits flush against the panel for a clean, low-profile look. Key Features Snap-F...
5mm Triple Output LED RGB - Common cathode (20 PCs)
A pack of 20 common-cathode RGB LEDs in a standard 5 mm through-hole package. Each LED contains three independent colour elements — red, green, and blue — sharing a single cathode pin. Drive each colour individually for status indicators, or use PWM to mix colours and produce any hue you need. K...
5MP Night Vision Camera for Raspberry Pi
A 5-megapixel night vision camera module for Raspberry Pi, complete with two infrared LED boards for clear imaging in low-light and dark environments. Based on the OmniVision OV5647 sensor, it connects directly to the Raspberry Pi's CSI camera port and features an adjustable focus ring for fine-t...
5MP Wide-Angle Camera Module for RV1106 Pico Boards – Low Light Sensitivity
·
A 5-megapixel wide-angle camera module built around the MIS5001 sensor, designed for the Luckfox Pico series development boards powered by the RV1106 chip. With high sensitivity and low dark current, this module delivers clear, low-noise images even in dimly lit conditions. Available in two lens...
5pcs NTC 10K Ohm Thermistor Temperature Sensor Cylinder Probe 1m Wire
A pack of five NTC thermistor temperature probes, each with a 1-metre wire lead for remote temperature sensing. These 10 KΩ (at 25°C) NTC sensors are sealed in a cylindrical metal probe for durability and are suitable for measuring temperatures from −30°C to +110°C. NTC thermistors decrease in r...
5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long
·
This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with the wiring crossed over for correct pin mapping between the two systems. Use th...
5-Pin Female Straight Header - PTH, 0.1in Pitch
·
This straight female header is a simple, handy connector for prototyping and PCB builds. It uses standard 0.1in spacing and is designed for through-hole mounting.The 5-pin female format mates neatly with most 5-pin male headers, making it useful for removable modules, sensor breakouts, and board-...
5-Pin Polarised Connector Housing
·
This 5-pin female housing is made for adding keyed, polarised connections to perfboard and PCB projects. It helps prevent power, sensor, or general-purpose connections from being plugged in backwards or the wrong way around.Use it where you want a simple removable connection for a peripheral, cab...
5-Pin Type-C Male to Solderless Terminal Power Cable (30cm, 5V 2A Output)
·
This 30cm cable converts a USB Type-C connection into a 5-pin solderless screw terminal block, making it easy to wire power and data to Type-C devices without soldering or custom connectors. All five Type-C pins are broken out — positive, negative, D+, D−, and shield/ground — giving full access t...
5-Position SMD D-Pad Directional Switch
·
This compact 5-way directional pad gives your microcontroller project a familiar tactile input for up, down, left, right and centre presses.It is an SMD switch, making it suitable for custom PCBs where you need a low-profile navigation control or menu input without using multiple separate buttons...
5V 0.3W Mini Solar Panel - ETFE
·
A compact 5 V, 0.3 W solar panel from Voltaic Systems, built with ETFE (Ethylene Tetrafluoroethylene) construction for superior durability over standard PET or laminate panels. Featuring 10 high-efficiency monocrystalline SunPower cells with 22%+ efficiency, this panel is waterproof, scratch-resi...
5V 0.6W Mini Solar Panel - ETFE
·
A compact 5 V, 0.6 W solar panel from Voltaic Systems, built with ETFE (Ethylene Tetrafluoroethylene) construction for superior durability over standard PET or laminate panels. Featuring 10 high-efficiency monocrystalline SunPower cells with 22%+ efficiency, this panel is waterproof, scratch-resi...
5V 10A switching power supply
·
This 5V 10A Switching Power Supply delivers up to 50W of stable DC power, making it ideal for driving LED strips, motors, CNC projects, and other power-hungry 5V devices. It accepts both 110V and 220V AC input, so it works worldwide with the appropriate mains cable. The output connects via a sta...
5V 10W Solar Panel - ETFE
·
This 10W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 1,670mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed...
5V 1.2W Solar Panel - ETFE
·
A 5 V, 1.2 W solar panel from Voltaic Systems, built with ETFE (Ethylene Tetrafluoroethylene) construction for superior durability over standard PET or laminate panels. Featuring 10 high-efficiency monocrystalline SunPower cells with 22%+ efficiency, this panel is waterproof, scratch-resistant, a...
5V 1.5A Linear Voltage Regulator - 7805 TO-220
·
The classic L7805 linear voltage regulator in a TO-220 package, capable of delivering a clean, regulated 5.0 V output (±2%) from an input voltage of 7–35 V. With built-in current limiting and thermal shutdown protection, it's a robust and forgiving choice for powering just about any 5 V electroni...
5V 1.5A Output PoE Module - Works with Raspberry Pi 3 B+
·
A compact Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.5 A. Connect the four input wires to the PoE pins on your Ethernet-capable board and get clean DC power on the other side — no separate power cable needed. ...
5V 1.8A Isolated Output PoE Module Works with Raspberry Pi 3 B+
·
An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...
5V 1A (1000mA) USB port power supply - UL Listed
·
This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...
