All Products

SKU: LB-LS0153R

Red Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degrees

SKU: SF-COM-08642

This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the switch opens. This makes for a great non-contact switch. ...

SKU: SF-COM-10601

An insulated reed switch that closes when exposed to a magnetic field and opens when the field is removed. The encapsulated design is more durable than glass reed switches and can be easily populated on a PCB. Key Features Magnetic Activation – Non-contact switching via magnetic field 1 A Max...

SKU: LB-24-REED

A reed switch is an electrical switch which is operated when a magnetic field is brought near to it.  Check out our tutorial here Digital Output (DO)GND: In electronics, we define a point in a circuit to be a kind of zero volts or 0V reference point, on which to base all other voltage measu...

SKU: REGULAR-SHIP

Dear Little Bird Customers,Please DO NOT buy this unless specifically directed by Little Bird Staff.Cheers- Little Bird Team

SKU: SF-CAB-21740

This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. It's long enough to connect to an antenna on the roof to one of our GNSS re...

SKU: SF-CAB-21739

A 300mm (1 foot) SMA male to TNC male cable with injection-moulded stress-relief boots. Built with SYV-50-3 cable for an excellent balance of low signal loss and high flexibility — chosen over RG58 for superior performance at GNSS frequencies. Ideal for connecting RTK development boards to high-...

SKU: SB-RELAY-BIT

Relay Bit provides a solution for controlling low and medium current/voltage devices and makes your projects intelligent. Relay bit could be a nice solution for controlling devices that could not be directly controlled by micro:bit's Digital I/Os. The standardized shield form factor enables a...

SKU: SF-COM-11041

A bare PCB for building a relay control circuit, based on SparkFun's Controllable Power Outlet tutorial. It allows you to switch high-voltage loads using a simple 0–5V GPIO signal from any microcontroller. Components must be sourced and soldered separately. Key Features Bare PCB – Solder your ...

SKU: PI-MNK00061

The MonkMakes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off. A micro:bit can turn an LED on and off directly, but anything more powerful requires something like a relay or a transistor. Using a transistor to switc...

SKU: LB-LS1717

This versatile relay module is a powerhouse of timing functions, ideal for projects requiring precise control over relay activation and deactivation. Featuring adjustable parameters and 18 distinct modes, it provides exceptional flexibility for automation tasks. Key Features Customisable Parame...

SKU: EC-MCS01584R

The Relay Shield v1.1 is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled by Arduino/Crowduino through digital IOs with external 9V DC supply. Compared to...

SKU: SF-COM-00100

These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices. This relay’s coil is rated up to 12V, with a minimum switching voltage of 5V. The contacts are rated up to 5A (@250VAC, 30VDC).

SKU: SF-COM-10924

These are massive single pole - double throw (SPDT) sealed relays. This means that when current is applied to the coil it throws a simple changeover switch, terminating the connection from the NC contact to ground and closing the NO contact. Use them to switch high voltage/high current devices.Fe...

SKU: AF-5039

A 10-pack of two-part relegendable plastic keycaps compatible with Cherry MX and MX-compatible switches. Each keycap consists of an off-white base and a clear snap-on cover — simply remove the cover, insert a custom label, sticker, or slip of paper, then snap the cover back on for a personalised ...

SKU: PL-957

This ball caster was originally released as a replacement part for the 3pi robot, but the 1/2″ ball can also be used a replacement part for the newer 3pi+ robot, which has the housing for the ball built directly into the chassis. This ball caster can also be used as a general-purpose ball caster...

SKU: AF-4767

Here's a handy power cable for the RGB LED Matrix Panels we carry.Easily plug into the back of your RGB matrix and insert or screw the power and ground cables onto either the Matrix Portal or the Matrix Bonnet, or whichever microcontroller-and-add-on you're using for your RGB Matrix project.Works...

SKU: AF-4728

A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire board. The same connector is used for both the Camera (CSI) and Display (DSI) por...

SKU: PL-3434

This is a full set of replacement gears for the Power HD High-Torque Servo 1501MG.

SKU: AF-2476

Replacement silicone tubes for the Professional Silicone-Tip Solder Sucker. Cut to your desired length as needed — the elastic, heat-resistant silicone withstands temperatures up to 350°C, letting you get close to your soldering iron and suck up molten solder with little to no residue. Key Featu...