All Products

SKU: AF-1967

This fully assembled mini pan-tilt kit provides two-axis motion using two included micro servos (SG-90 or SG-92 type). The mechanism pans approximately 180° side to side and tilts approximately 150° up and down, giving your project a full range of directional movement. The top platform provides ...

SKU: EC-MOA09001D

A compact mini PC enclosure for the Raspberry Pi 5 (also compatible with Jetson Orin Nano), featuring a built-in 1.3-inch OLED screen that displays real-time system status information. Includes an integrated cooling fan, GPIO adapter board, and an internal PCIe M.2 slot for NVMe storage expansion...

SKU: DF-FIT0180

This type of photoresistor is made of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor. It changes resistance depending on the amount of light it is exposed to. These little sensors can be used in light-interacting projects. SPECIFICATIONS Head ...

SKU: SF-SEN-09088

This is a very small light sensor. A photocell changes (also called a photodetector, photo resistor, CdS or photoconductive cell) resistance depending on the amount of light it is exposed to. These little sensors make great ambient light triggers (when light in the room turns on, do something).Fe...

SKU: LB-LS0801

Feeling musical?  Limited by the lack of sound on your micro:bit?This fun little module will add light and sound to your micro:bit project.It has 13 capacitive touch keys which you can use as a mini piano to unleash your inner Mozart!There are 4  WS2812B RGB LEDs controlled by a single ...

SKU: LB-LS0869

The AM312 sensor is a mini IR pyroelectric infrared PIR motion human body sensor that is easy to install and has low power consumption. Its digital signal processing and high sensitivity make it ideal for use in automatic sensing circuits. Additionally, the repeatable trigger mode ensures that...

SKU: AF-5578

The BS612 is a compact, fully configurable mini PIR motion sensor that detects movement from approximately 3–8 metres away with a 120° detection spread. Its small form factor makes it ideal for unobtrusive motion-sensing projects where a full-size PIR module would be too bulky. Unlike basic PIR ...

SKU: EC-RPA08821S

This speaker equipped with 360-degree sound field integrates a cone design with a custom-built speaker to project sound in all directions. It can offer deep and rich sound with HI-FI result for it comes with 1.4 subwoofers and the vacuum base. It is a new concept integrative portable mini speaker...

SKU: AF-3624

This Mini Power Meter with Voltage, Current, Watts, mAh & mWh Display (whew that is a mouth-full) is a lot like the USB In-Line Voltage and Current Meter we carry but can  be used with a wide range of voltages (not just USB connections). Measure the working voltage and current output for ...

SKU: PL-2808

A compact latching power switch with built-in reverse voltage protection. One push turns power on, another push turns it off – providing clean, reliable power control without bulky mechanical switches. This low-voltage (LV) version operates from 2.2V to 20V with up to 6A continuous current, maki...

SKU: SF-COM-00097

We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friendly. Perfect as a tactile reset switch. These buttons are rated up to 50mA.

SKU: DF-FIT0179

Miniature Single Pole Single Throw switches. These are high quality Omron type B3F momentary on switches. Perfect as a tactile reset switch. Mounts directly into standard bread boards also prototype shield. Rated up to 50mA.  SPECIFICATIONS  Maximum ratings: DC 12V 50mA Operation tempe...

SKU: LB-PUSH

We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friendly. Perfect as a tactile reset switch. These buttons are rated up to 50mA. These have extra longs legs. Dimensions: Width: 6mm,  Length: 6mm, Hei...

SKU: SF-COM-08720

A miniature surface-mount momentary pushbutton switch with a low-profile design. Ideal for use as a tactile reset button or general-purpose input on custom PCBs. Rated up to 50 mA. Key Features Surface Mount (SMD) – Low-profile for compact PCB designs Momentary Action – Normally open, closes ...

SKU: DF-ROB0111

The MiniQ 4WD Cross Country is a compact, fully assembled Arduino-compatible mobile robot designed for education and learning. Built around an ATmega32U4 (Arduino Leonardo) controller, it features 4-wheel drive with higher ground clearance (25 mm) for improved off-road capability on uneven terrai...

SKU: DF-KIT0071

The MiniQ Discovery Robot Kit is a 2WD mobile robot platform based on the MiniQ chassis and the Romeo V2 All-in-One Arduino-compatible controller. It comes with a Sharp GP2Y0A21 distance sensor and 9g micro servo pre-included, making it ready for obstacle avoidance and sensor-based navigation rig...

SKU: DF-KIT0015

This MiniQ motor wheel set is especially designed for education and hobbies. It features a powerful metal gear motors which provide a speedy robot. With buildin encoders, it can do PID speed control which is Ideal for maze competition and education purpose.Easily for assembling to the chassis...

SKU: DF-SEN0116

An AB two-phase optical encoder designed for the DFRobot 2WD MiniQ robot chassis. Uses two infrared reflective sensors to generate quadrature pulse waveforms with approximately 90° phase difference, allowing you to determine both wheel speed and direction of rotation. Mounts directly onto the mo...

SKU: AF-3983

Put your project in stealth mode with these super slim, super tiny, and silent Mini Soft Touch Push-button Switches. They're less 'clicky' than tactile switches, they have a rubbery elastomer that feels good to press. No dangly spider-leg-pins to solder as these buttons are SMD. We see these...

SKU: AF-2017

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have a couple points. In our example photo, we put a chip and some jumper wires in t...