All Products

SKU: TB-ZC4895

A 74HC595 8-bit serial-in, serial/parallel-out shift register IC in a through-hole DIP-16 package. This tri-state output shift register accepts serial data (SPI) and outputs 8 digital bits in parallel, making it ideal for expanding the number of outputs from a microcontroller. Key Features 8-B...

SKU: AF-450

A pack of three 74HC595 shift register ICs. These chips take a serial input (SPI) of one byte and output those 8 bits onto 8 digital output pins. Chain multiple chips together by connecting the serial output of one to the serial input of the next — three chips give you 24 digital outputs from jus...

SKU: TB-ZS5000

A 74LS00 quad 2-input NAND gate IC in a through-hole DIP-14 package. Contains four independent 2-input NAND gates, one of the most fundamental building blocks in digital logic design. Key Features Quad 2-Input NAND – Four independent NAND gates 74LS Series – Low-power Schottky TTL logic Thro...

SKU: TB-ZS5027

A 74LS27 triple 3-input NOR gate IC in a through-hole DIP-14 package. Contains three independent 3-input NOR gates for digital logic design and signal processing. Key Features Triple 3-Input NOR – Three independent NOR gates 74LS Series – Low-power Schottky TTL logic Through-Hole DIP-14 – Br...

SKU: TB-ZS5086

A 74LS86 quad 2-input exclusive-OR (XOR) gate IC in a through-hole DIP-14 package. Contains four independent 2-input XOR gates, essential for parity checking, arithmetic circuits, and data comparison. Key Features Quad 2-Input XOR – Four independent exclusive-OR gates 74LS Series – Low-power ...

SKU: AF-735

An 8-bit logic level shifter in a breadboard-friendly DIP package. The 74LVC245 converts between 3.3V and 5V logic levels, making it easy to interface modern 3.3V sensors and peripherals with 5V microcontrollers like Arduino. Even when powered at 1.8V, the chip safely accepts up to 5V signals on...

SKU: AF-6396 · MPN: ADA6396

This bare eInk/ePaper display is a large 7.5 inch monochrome panel with 800 x 480 pixels, designed for low-power projects where the image needs to stay visible even after power is removed.Electronic paper displays are high contrast and easy to read in daylight, giving a paper-like look that suits...

SKU: AF-6415 · MPN: ADA6415

This 7.5" tri-colour e-ink bare display features 800×480 pixels in red, black, and white. E-paper displays are daylight-readable, ultra-low power, and retain their image even when completely depowered — ideal for battery-powered and always-on signage applications. This is the bare display elemen...

SKU: WS-31123 · MPN: 31123

This 7.5" e-paper display (H) features 800×480 resolution with a four-colour palette of red, yellow, black, and white. Using microcapsule electrophoretic technology, it delivers a paper-like viewing experience with natural light reflection, an ultra-wide >170° viewing angle, and zero power consum...

SKU: SF-SPX-14846

This 7.5" tri-colour e-paper bare display features 640×385 pixels in black, white, and red. E-paper displays offer a paper-like viewing experience with excellent visibility from almost any angle, even in direct sunlight, and consume virtually no power between refreshes — the image persists even w...

SKU: WS-21393

This 7.5" fully laminated e-paper display features 800×480 resolution in black and white with an anti-glare toughened glass panel. The full lamination makes the panel thinner while providing better protection, and the anti-glare glass reduces ambient light interference and reflective glare for cl...

SKU: AF-1548

Digitally-controllable RGB LED pixel bars using WS2801 driver chips. Each 75mm plastic PVC bar contains 3× 5050 RGB LEDs and a controller chip, epoxy-flooded for waterproof outdoor use. Sold as a strand of 21 pixels — ideal for building large RGB 7-segment displays. The pixels connect via a 4-co...

SKU: WS-30537 · MPN: 30537

This 7.5" e-paper display is powered entirely via NFC — no batteries, no cables. Using passive near-field communication technology, it receives both power and image data wirelessly from an NFC-enabled smartphone or dedicated NFC reader board, making it a truly maintenance-free display solution. ...

SKU: DF-DFR0678

This 7" TFT touchscreen connects directly to the Raspberry Pi via the DSI display interface, delivering 800×480 resolution with capacitive 5-point touch input. The display is powered entirely from the Raspberry Pi — no external power supply required. Mounting holes on the back of the screen allo...

SKU: DF-FIT0478

This capacitive touch panel overlay adds touch input to your LattePanda 7" IPS Display (sold separately). Simply apply the adhesive panel over the display, connect the FPC cable, and power the board for a complete touch interface. The panel features 6H surface hardness for scratch resistance, 85...

SKU: AF-1667

This compact 7" IPS display delivers 1280×800 (720p) resolution with built-in 3W stereo speakers and multiple video inputs including HDMI, VGA, and composite (NTSC/PAL). Simply connect a 9–12V DC adapter and a video source for an instant mini monitor. The display features front-panel buttons for...

SKU: DF-DFR0506

This 7" HDMI display with capacitive touchscreen supports up to 5 touch points and uses DFRobot's USB free-driver technology — simply plug in via USB for instant touch control with no driver installation required. It works like a keyboard or mouse on any compatible system. The display supports W...

SKU: EC-DPM50080D

This 7" IPS touchscreen monitor is designed for Raspberry Pi with a built-in speaker, stand, and all necessary cables included in the box. Mount your Raspberry Pi directly on the back of the display using the included acrylic board and copper standoffs for a compact, portable setup. The capaciti...

SKU: WS-25270

A 7-inch IPS capacitive touchscreen display with a DSI interface, designed for Raspberry Pi. Features 800×480 resolution, 170° wide viewing angle, and 5-point touch with a toughened glass panel (6H hardness). Available with an optional ABS case for Pi 4B. Driver-free on Raspberry Pi OS with full...

SKU: WS-30646 · MPN: 30646

This 7" DSI capacitive touchscreen from Waveshare features a 1280×720 IPS panel with 10-point multi-touch, toughened glass with optical bonding, and an anti-fingerprint coating. The integrated driver circuitry connects via a single FPC cable, resulting in a slim 9.3 mm total thickness. Compatibl...