All Products

SKU: AF-3847

A compact Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.5 A. Connect the four input wires to the PoE pins on your Ethernet-capable board and get clean DC power on the other side — no separate power cable needed. ...

SKU: AF-3848

An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...

SKU: AF-501

This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...

SKU: LB-LR0046

The 5V 1-Channel Optocoupler Relay Module provides safe, isolated switching of high-voltage loads from a microcontroller. An onboard SMD optocoupler isolates the control circuit from the relay, protecting your Arduino, Raspberry Pi, or other development board from voltage spikes. A jumper settin...

SKU: LB-LR0002

The 5V 1-Channel Relay Board Module provides a simple way to switch high-voltage loads from your Arduino, Raspberry Pi, or other microcontroller project. Controlled via a 5–12V TTL signal, this relay can switch loads up to 250V AC, making it suitable for controlling lights, fans, pumps, and other...

SKU: AF-276

This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for powering LED strips, motors, and other current-hungry 5V devices. Key Features Out...

SKU: AF-1994

This 5V 2A USB power supply provides clean, regulated power for single-board computers like the Raspberry Pi and BeagleBone, or any other USB-powered device with high current demands. It outputs via a USB Type-A port, so you can use whatever USB cable your project requires. The supply outputs 5....

SKU: SS-106990021

The 5V/3.3V Breadboard Power Supply plugs directly into a standard breadboard and provides regulated 5V or 3.3V power to both rails. It accepts power via either a 7–15V DC barrel jack or a 5V Micro-USB input, giving you flexible options for powering your prototyping projects. Designed by Seeed S...

SKU: DF-DFR0884

This dual-USB step-down buck converter accepts 8–32V DC input and delivers a regulated 5V output at up to 3A across two USB Type-A ports simultaneously. With over 85% conversion efficiency and built-in reverse-connection and overload protection, it provides a compact and reliable way to power USB...

SKU: DF-FIT0641

This 1-metre USB-A to USB-C cable supports both data transfer and power delivery at up to 5V/3A (15W). It provides a reliable connection for charging and programming USB-C devices including the Raspberry Pi 4B, Jetson Nano, and other USB-C-enabled development boards and phones. Key Features Po...

SKU: AF-1466

This UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 4A (4,000mA / 20W) via a standard 5.5×2.1mm centre-positive DC barrel jack. It accepts 110–240V AC input and is ideal for powering LED matrices, NeoPixel strips, and other high-current 5V projects. Key Featur...

SKU: AF-5367

This 5W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 940mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed wi...

SKU: EC-DIY19560P

This compact brushless submersible pump operates on 3.5–9V DC via a USB connector, making it easy to power from a USB power bank, solar panel, or development board. It delivers up to 200L/h flow and can push water up to 1.5m in height, with low noise and low power consumption. The pump uses a hi...

SKU: DF-FIT0878

This 5V COB LED strip produces bright, uniform blue light (465nm) with no visible hotspots or shadows. It uses 16 chip-on-board LEDs encapsulated in silicone for protection and longevity, and runs on just 5V DC — making it easy to power from USB, battery packs, or microcontrollers. The strip is ...

SKU: DF-FIT0879 · MPN: FIT0879

This compact green COB light bar provides bright, even illumination for decorative lighting and small embedded projects. It uses 16 densely packed COB LEDs under silicone encapsulation to create a smooth luminous surface without the dotted look common on traditional LED strips.It runs from a simp...

SKU: DF-FIT0876 · MPN: FIT0876

This compact COB LED strip uses 16 LEDs under a silicone encapsulated surface, helping protect the chips while providing a smooth, even warm white light output.It runs from DC 5V, making it suitable for battery-operated lighting projects and other low-voltage builds. The strip is solderable and c...

SKU: TB-MP3144

An ultra-slim switchmode power adaptor that delivers 5V DC at 1A through a compact, lightweight design. Slim enough to sit side by side on a power board without blocking adjacent outlets. Features built-in EMI filtering, short circuit protection, over-current protection, and thermal shutdown for...

SKU: AF-3874

This 5V electromagnet provides 10kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it perfect for controllable locking, sorting, and pick-and-place applications. Since it behaves as an ind...

SKU: AF-3872

This 5V electromagnet provides 2.5kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it ideal for small controllable locking, sorting, and pick-and-place applications. Since it behaves as a...

SKU: AF-3875

This 5V electromagnet provides 25kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it suitable for controllable locking, sorting, and pick-and-place applications. Since it behaves as an in...