All Products

SKU: DF-FIT0792

A pack of four coreless micro motors measuring 6 × 14 mm, reaching 55,000 RPM at 3.7V. The longest in the 6 mm diameter range, this variant offers the most torque while maintaining compatibility with micro drone propellers via its 0.8 mm shaft. Key Features 55,000 RPM – High-speed coreless mot...

SKU: DF-FIT0795

A pack of four coreless micro motors measuring 8 × 16 mm, reaching 50,000 RPM at 3.7V. With the widest diameter and highest current draw (170 mA) in the coreless micro motor range, these deliver the most torque — ideal for mini drones carrying camera payloads or heavier RC builds that need maximu...

SKU: DF-FIT0796

A pack of four coreless micro motors sized 8.5×20mm, designed for DIY drone builds and lightweight RC projects. These high-speed motors deliver 46,000 RPM from a compact form factor, making them well-suited for quadcopter and multirotor applications. Each motor runs on 3.7V (single LiPo cell) an...

SKU: AF-425

A 4-pin Molex power cable that matches the hard drive/CD-ROM power connectors found on AT and ATX power supplies. Use it to tap into 5V or 12V DC from a desktop power supply for your projects — a convenient source of regulated power for high-current applications like LED strips, motors, and displ...

SKU: AF-4424

A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...

SKU: AF-578

A matched pair of 4-wire cables with JST SM connectors — one plug and one receptacle — for easy plug-and-unplug connections. Each cable is 15cm long with a latching connector that stays secure during use but disconnects cleanly when needed. JST SM connectors are commonly found on digital address...

SKU: DF-FIT0862

These solderless 4-pin snap-down connectors make it easy to join two pieces of cuttable RGB LED strip together without soldering. Simply align the strip's copper pads with the connector pins, snap the cover down, and you have a firm electrical connection. Designed for 10mm wide, 4-wire RGB LED st...

SKU: DF-FIT0864

These solderless 4-pin snap-down connector cables make it easy to bridge a gap between two pieces of cuttable RGB LED strip without soldering. Each cable has a snap-down connector on both ends with a wire in between, allowing you to join strips that aren't directly adjacent. Designed for 10mm wid...

SKU: DF-FIT0866

These solderless 4-pin LED strip connector cables have a snap-down connector on one end and DuPont-style female headers on the other, making it easy to connect an RGB LED strip directly to a microcontroller or driver board. The 20cm colour-coded wires with clearly marked polarity simplify wiring....

SKU: DF-FIT0868

This solderless 90° right-angle LED strip connector lets you join two sections of 4-wire RGB LED strip around corners, curves, and angles without soldering. The snap-down connectors on both ends provide firm, reliable contact, and the colour-coded wires with clearly marked polarity make installat...

SKU: TB-PP1912

A 4-pin mini XLR male plug for in-line (cable) mounting. The metal-cased connector features solder tag termination and a black housing, suitable for audio equipment, lighting control, and other applications requiring a compact, reliable multi-pin connector. Specifications Type – Mini XLR plug ...

SKU: TB-PS0376

A 4-pin mini DIN panel-mount socket (S-Video / S-VHS type) with nickel-plated copper construction. The socket requires a 10mm panel cutout and uses solder tag termination for secure, permanent connections. Specifications Type – Mini DIN 4-pin (S-Video) socket Pins – 4 Case Material – Nickel-...

SKU: AF-1352

A simple 1-to-4 DC barrel jack splitter that lets you power four devices from a single DC power adapter. Features standard 5.5mm/2.1mm barrel connectors with rugged moulded construction. Plug your existing DC power supply into the input jack, and get four identical output plugs ready to connect ...

SKU: DF-DFR0852

A 4-channel USB buck converter module with built-in fast-charge protocol support. Accepts 6–32V input and provides adjustable 3–12V output (default 5V) across four independent USB ports, each capable of triggering fast-charge negotiation for compatible devices. The module automatically negotiate...

SKU: SF-SEN-10313

The RPI-1031 is a 4-directional tilt sensor that detects orientation using internal infrared emitters and detectors. Unlike simple single-axis tilt switches, this sensor can distinguish between multiple orientations, making it useful for projects that need to know which way is "up." Inside the s...

SKU: DF-SEN0448

A 4-wire slot-type photoelectric switch with integrated optical transmitter and receiver. The 5mm detection slot can detect objects passing through, including transparent materials, making it ideal for counting, position sensing, and high-speed object detection in industrial and hobby application...

SKU: AF-5077

A two-piece silicone mould set for casting your own custom keycaps. Includes four 1U (standard single-key size) and one 1.25U (Tab-key size) cavities, compatible with Cherry MX-style key switches. UV-curable resin is recommended for the best results — it cures quickly and cleanly with a UV lamp,...

SKU: AF-5078

A two-piece silicone mould set for casting your own custom keycaps. Includes four 1U (R4 profile, standard single-key size) and one 1.5U (Caps Lock size) cavities, compatible with Cherry MX-style key switches. UV-curable resin is recommended for the best results — it cures quickly and cleanly wi...

SKU: LB-LR0231

A 4×4 matrix membrane keypad with 16 tactile buttons, ideal for adding user input to microcontroller projects. The keypad uses a standard 8-pin matrix wiring scheme (4 rows × 4 columns), requiring only 8 GPIO pins to read all 16 keys. The flexible membrane design is thin and lightweight, making ...

SKU: AF-5071

A premium milled and anodised aluminium enclosure for building a custom 4×4 mechanical keypad. The dark grey shell with silver accents provides a solid, professional-looking base for your macro pad or shortcut keypad project. The multi-part enclosure features a hinged design that lets you angle ...