All Products

SKU: LB-LR18

Looking for a Robot Chassis?   Check out our 2 Wheel Robot Chassis in Blue.  Perfect for adding your own electronics to.  It comes with two motors which can be connected to your Arduino, Micro:Bit or Raspberry pi to get your project moving! Voltage:4.5V Gearbox:4.8~7.2V No Loa...

SKU: DF-FIT0300

This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other servo. Velocity range is 0 to 54 mm (0 to 2.13"). Total weight about 45 g. The servo slot fit most...

SKU: LB-LS7942

Robot Arm Vacuum Pump & Valve Kit – PWM Electronic Switch Controller with Suction Cup (Arduino Compatible)Take your robotics projects to the next level with this compact vacuum suction kit, designed for robotic arms, manipulators, and automation systems. Featuring a high-efficiency air pump, thre...

SKU: WS-30385 · MPN: 30385

Unleash Precision Handling with the High-Performance Robotic Arm GripperElevate your robotics project with our state-of-the-art High-Performance Robotic Arm Gripper. With advanced options to integrate with ST3215 / CF35-12 Serial Bus Servos, this gripper is designed to meet the demands of numerou...

SKU: DF-DFR1231

The IO Extender for UNIHIKER K10 is a dedicated expansion shield engineered to unlock the full creative potential of the UNIHIKER K10 AI Coding Learning Board. It functions by breaking out all of the UNIHIKER K10's onboard IO pins into a more accessible and feature-rich layout. The core design p...

SKU: LB-0750673893

Accessible to all readers, including students of secondary school and amateur technology enthusiasts, Robotics, Mechatronics, and Artificial Intelligence simplifies the process of finding basic circuits to perform simple tasks, such as how to control a DC or step motor, and provides instruction o...

SKU: LB-LS0312

This DIY Robot Tank Chassis with built-in Shock absorption the perfect base for your next robotics project. Specifications:  Motor: 260 Voltage: 3V-9V Weight: 550g Track Width: 2.3cm Size: 30cm x 15cm x 7.6cm Notes: Batteries not included! This may come in the green or brown version Packag...

SKU: SF-PRT-29360 · MPN: PRT-29360

This hookup cable provides a simple way to connect to a RockBLOCK 9704 module. It has a 2x8 C-Grid III female connector on one end and unterminated bare wires on the other.The 300mm length is suited to making your own wiring loom, connecting into a prototype, or breaking the RockBLOCK connection ...

SKU: SF-WRL-14498

The RockBLOCK 9603 allows you to send and receive short messages from anywhere on Earth with a clear view of the sky. It works far beyond the reach of WiFi and GSM networks. Maybe you want to transmit weather information from mid-ocean? Or use it to control your robot in the middle of the dese...

SKU: SF-WRL-28896 · MPN: WRL-28896

  The RockBLOCK 9704 by Ground Control is a breakout board for the new Iridium 9704 including a built-in patch antenna and a supercap charger to enable low power operation. If you need low data rate connectivity over the entire globe, Iridium is the answer. RockBLOCK 9704 leverages the I...

SKU: PI-COM0415

The rocker switch is a classic and this one is a great size for an unobtrusive on/off switch.It can be panel mounted and has two tabs for connecting wire. You can either solder wire or use a quick-connect connector.

SKU: PL-1406

This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.

SKU: SF-COM-14978

This little round on/off/on toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It’ll also look pretty slick in your project!

SKU: SF-COM-11155

These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches have three terminals, the two that you would normally see plus a ground tab for ...

SKU: SF-COM-08837

Your project will probably need an on/off switch. If you plan to house the project in an enclosure, we found this great rocker switch to help you out. RoHS and UL approved. Features: Right angle solid through-hole mounting Can also be snap-in panel mounted Rated up to 15A @ 125V Documents:&n...

SKU: LB-MOUTH

Add some personality to your papercraft, cardboard, or robotics projects with these fun mouth stickers. Available in a variety of colours and styles, they're perfect for giving your robots, trashbots, and craft creations seriously expressive faces. Each sticker measures roughly 1.5–2 cm and peel...

SKU: LB-NOSE

Looking for something extra to jazz up your papercraft, cardboard or  robotics project? These nose Stickers - they'll will make an excellent addition to your craft supplies! These quirky nose stickers come in a number of colours, so you can mix and match all sorts of googly looks, endow...

SKU: DF-DFR0305

The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BLE chip in a single board — letting you build and wirelessly control robots witho...

SKU: DF-DFR0351

INTRODUCTION Romeo BLE mini is a small Arduino compatible robot control board with motor driver and bluetooth 4.0. It benefits from the Arduino open source platform, which includes thousands of open source codes. Its integrated 2 way DC motor driver allows the projec...

SKU: DF-DFR1063 · MPN: DFR1063

The Romeo Mini ESP32-C3 is a compact robot control board with an onboard ESP32-C3 module providing Wi-Fi and Bluetooth 5 dual-mode communication. It features two channels of 1.7A motor drivers, servo control, and 9 Gravity-compatible I/O interfaces — all in a tiny 47mm × 38.5mm form factor. A bu...