All Products

SKU: SF-SEN-15901

This Weather Meter Kit provides the three core sensors for a DIY weather station: an anemometer (wind speed), a wind vane (wind direction), and a rain gauge. All three sensors use passive magnetic reed switches rather than active electronics, making them simple to interface with any microcontroll...

SKU: AF-481

This chrome-plated metal pushbutton is built tough and looks great doing it. Simply drill a 16mm hole into any panel up to 12.7 mm thick, drop it in, and tighten the included nut — a rubber gasket keeps water out of your enclosure. The flat metal actuator is surrounded by a blue LED ring that lig...

SKU: AF-559

A chrome-plated metal pushbutton with an illuminated red LED ring, designed for panel mounting in a 16 mm hole. The weatherproof design includes a rubber gasket to seal the enclosure against water ingress, making it suitable for both indoor and outdoor applications. The switch and LED are electr...

SKU: AF-558

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, su...

SKU: AF-613

Built for projects that need an outdoor-ready camera, this module combines a metal weatherproof enclosure, mounting hinge and a 1 meter long cable with the TTL serial and NTSC video signals brought out.It outputs NTSC video and can also capture snapshots from that video stream, sending pre-compre...

SKU: DF-SEN0208

Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! We have developed waterproof ultrasonic distance sensors with a waterproof sealed emitter. This sensor is suitable for outdoor applica...

SKU: DF-SEN0186

INTRODUCTION  Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and makes it easy to use with most controllers in the market. Together with other comp...

SKU: LB-LR0214-4

The D1 R2 is a mini wifi board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) A Micro USB connection A power jack, 9-24V power input. Compatible with Arduino Compatible with nodemcu   Programm...

SKU: DF-FIT0085

This custom-designed plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on the hub optionally allow a reflectance sensor to be used for encoder feedback. ...

SKU: SF-ROB-13259

These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you will be able to get almost any beginners robot project moving.These wheels are s...

SKU: SF-ROB-12405

These wheel adaptors allow you to adapt 12mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows you to run 6-32 socket head screws into any .770” hub or component that utilizes the .770” hub pattern. Each kit consists of two 2 aluminum mounts and 2 8-32 x 1/2” truss head...

SKU: SF-ROB-12629

The DAGU Wheel Encoder Kit is a simple add-on for wheeled robots that measures speed and distance travelled. Each kit includes two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors, providing reliable rotational feedback for odometry and motion control. The sensors come pre-t...

SKU: LB-LS0100

HS0100 White 1080P Mini HDMI  To VGA  Converter Box Adapter

SKU: TB-ZD0220

A bright white 10 mm through-hole LED with a water-clear lens and 5,000 mcd luminous intensity. The narrow 30° viewing angle produces a focused beam, making it suitable for indicator lights, spotlighting, and directional illumination projects. Key Features High Brightness – 5,000 mcd luminous ...

SKU: AF-1001

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for t...

SKU: AF-4998

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of white DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or&...

SKU: AF-1621

These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below. Here, we've got the LEDs available individually and they're really cool! Each LED is encased in a 3.5mm thick strip of a acrylic. The ...

SKU: AF-1622

A diffused white LED backlight strip in a 3.5 mm thick acrylic enclosure. Normally found behind LCDs, this module uses a single white LED with a specially designed acrylic diffuser to provide near-uniform illumination across the entire surface. A reflector on the back directs all light forward fo...

SKU: AF-1626

These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below. Here, we've got the LEDs available individually and they're really cool! Each LED is encased in a 3.5mm thick strip of a acrylic. The ...

SKU: AF-5538

Have you found yourself in a maze of twisty-turny knobs, all alike? These micro potentiometer (or rotary encoder) knobs offer a rainbow burst of color to your synth or control panel. They are made of a hard plastic, with a grippy star shape. The shape is sometimes referred to as "Davies 1900...