All Products

SKU: AF-2004

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able...

SKU: AF-3164

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able...

SKU: AF-3166

This silicone-insulated wire is exceptionally flexible and soft while remaining impressively tough — making it the go-to choice when standard PVC-covered wire can't keep up. Its silicone sheath handles extreme temperatures and high voltages without stiffening, cracking, or becoming brittle over t...

SKU: AF-3168

A 50-foot spool of green 30 AWG silicone-sheathed stranded-core wire. Silicone insulation makes the wire extremely flexible and soft while handling temperatures up to 200°C and voltages up to 600 V — well beyond the limits of standard PVC-covered wire. Key Features Super Flexible – Silicone sh...

SKU: AF-3167

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be ...

SKU: AF-1611

A soft, squishy 4×4 silicone elastomer keypad with 16 buttons, each designed to fit a 3mm LED for optional backlighting. The conductive pad on the bottom of each button closes a contact underneath when pressed, providing ~3mm of silent travel with a satisfying feel. The keypads can be tiled edge...

SKU: SF-TOL-25575 · MPN: TOL-25575

Self-fusing silicone electrical tape is the perfect way to insulate and protect your freshly-soldered splice.These tape strips stretch several times their own length to tightly wrap and conform to soldered joints, then securely bonds with themselves without any sticky gooey adhesives. The wrapped...

SKU: AF-4994

Keep unused HDMI ports clean and dust-free with these soft silicone dust cover inserts. They slip neatly into any standard HDMI socket on computers, displays, Raspberry Pi boards, capture cards, and other devices. The pack of 10 gives you plenty of covers for multi-port setups, with spares in ca...

SKU: AF-5214

Here's an easy solution for keeping your micro HDMI ports free from dust and other unsavory particulates. These squishy Silicone Micro HDMI Dust Cover Inserts slip neatly into any computer or device with an HDMI socket, like the Raspberry Pi 4. Comes in a pack of ten, so you're set even...

SKU: AF-5213

Soft silicone dust covers designed to fit Mini HDMI ports. They slip into the socket to keep dust and debris out when the port is not in use, helping to maintain reliable connections over time. Key Features Mini HDMI Fit – Sized specifically for Mini HDMI sockets Soft Silicone – Easy to inser...

SKU: YH-6000300244

This protective case used for micro:bit.  It comes in 3 colours  red, blue, orange. The shell has two different sides, dot matrix display area, micro, bit key and Gold finger usage area in the front face. Micro USB interface, power interface and reset button in the back face. It can ...

SKU: DF-FIT0647

This custom-fit silicone sleeve protects the DFRobot HUSKYLENS AI camera from drops, bumps, dust, and splash water. The soft, stretchy silicone fits snugly around the board while leaving all ports and interfaces fully accessible. The sleeve features a matte-finish coating that resists dust and f...

SKU: AF-3659

Move fluid from here to there with this very nice elastomeric silicone tubing, specifically for our peristaltic pump. It's one meter long and fully silicone with the correct diameter to give great peristaltic performance.This silicone tubing is not sterile and might get a lil' dirty on...

SKU: AF-4992

Here's an easy solution for keeping your USB A devices free from dust and other unsavory particulates. These squishy Silicone USB A Dust Cover Inserts slip neatly into any computer or device with a standard USB A socket.Comes in a pack of ten, so you're set even if y...

SKU: AF-4993

Here's an easy solution for keeping your USB C devices free from dust and other unsavory particulates. These squishy Silicone USB C Dust Cover Inserts slip neatly into any computer or device with a USB C socket, from the Adafruit Feather STM32F405 Express to the Rasp...

SKU: SF-DEV-17588

The BGM220 Explorer Kit from Silicon Labs is an ultra-low-cost, compact development and evaluation platform for the BGM220P Bluetooth Module. With a mikroBUS socket and Qwiic connector built in, you can quickly add functionality using a wide range of off-the-shelf add-on boards. Programming is s...

SKU: LB-FIL-0154

We've finally found the best Reflective Pink PLA filament in Australia! This is a 1Kg reel of 1.75mm Reflective Pink PLA (polylactic acid) plastic filament for 3D printing. PLA is a bioplastic and makes for a great general-purpose filament with smooth surface finish. This filament is very ea...

SKU: AF-5055

A pair of silver anodised aluminium bumper feet designed for electronics enclosures, keyboard cases, and DIY projects. Each foot features a black rubber insert for non-slip grip and a clean metallic finish that complements anodised aluminium housings. Mount using the included M4-threaded machine...

SKU: AF-2838

This little Silver-color Pin with Foam Adhesive is the perfect way to attach any PCB or small component to cloth material.  The adhesive forms a solid but not permanent bond for a strong reliable hold. The pin also has a handy little locking mechanism to keep the pin from unlatching from ...

SKU: AF-5350

These Silvery Horizontal RFID Blocking Card Sleeves keep all your RFID-enabled cards (i.e. credit cards, bank cards, photo IDs, etc) safe from identity theft and are much more effective than wrapping them in aluminum foil. These protect your cards' Radio Frequency Identification (RFID) chip from ...