All Products

SKU: SF-SEN-18521

The SparkFun AS6212 Digital Temperature Sensor Breakout delivers high-accuracy temperature measurements with excellent low power consumption. Using the AS6212 sensor from ams AG, it achieves ±0.2 °C accuracy across a wide range and consumes just 6 µA in normal operation. The breakout communicate...

SKU: SF-SEN-13314

The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. While some temperature sensors use an analog voltage to represent the temperature, the TMP102 uses the I2C bus of ...

SKU: SF-SEN-16304

The SparkFun TMP102 Qwiic breakout provides accurate digital temperature readings over I2C with minimal wiring. Based on the Texas Instruments TMP102, the sensor delivers 0.0625 °C resolution and ±0.5 °C accuracy, communicating entirely over the I2C bus — no analogue conversion needed. This vers...

SKU: SF-WRL-22131 · MPN: WRL-22131

The SparkFun Digi XBee Arduino Shield connects Digi XBee 3 modules to your Arduino, enabling wireless communication via LTE-M/NB-IoT, cellular, and GNSS. Compatible with any through-hole Digi XBee module, this shield features USB-C power, a Qwiic connector for I²C sensors, and a standard Arduino ...

SKU: SF-WRL-21636 · MPN: WRL-21636

The SparkFun Digi XBee® Development Board is designed to help you quickly and easily prototype low-power cellular IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT, Digi XBee RR, and any existing through-hole Digi Xbee module. This board breaks out all the functionality of your XB...

SKU: SF-WRL-22032 · MPN: WRL-22032

The SparkFun Digi XBee Explorer Regulated is a breakout board for Digi's XBee 3 micro form factor modules. It provides regulated power (up to 6V input), a Qwiic connector for I2C sensors, and reset/D0 buttons — everything you need to get an XBee module up and running without a USB connection. Co...

SKU: SF-WRL-20855

Designed for 810-910 MHz (868MHz center frequency) this antenna is ideal for distant LoRa nodes. Utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna. Features: Frequency Range: 810-910MHz Center Frequency: 868MHz Gain: 2dBi Ant...

SKU: SF-KIT-13682

If you do anything with electronics, you’re probably already using transistors, but you’re probably using them in large, prepackaged clusters of just one type. The SparkFun Discrete Semiconductor Kit addresses your needs of only needing one or a couple transistors without you needing go and order...

SKU: SF-SEN-18993

This SparkFun Distance Sensor Breakout utilizes the VL53L4CD next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at short ranges for its size. The VL53L4CD from STMicroelectronics uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit an infrared...

SKU: SF-SEN-14722

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit an Infrared laser to time the ref...

SKU: SF-LAB-17361

The micro:bit v2 Educator's Lab Pack includes 10 micro:bit v2 boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need, including micro:bits, cables, battery packs and a few parts to experiment with. This package provides an easy way t...

SKU: SF-BOB-12758

The SparkFun Electret Microphone Breakout pairs a small electret microphone capsule with a 60× OPA344 op-amp preamplifier, making it easy to detect sound with a microcontroller's analogue-to-digital converter. Pick up voice, claps, knocks, or ambient noise — the amplified signal is ready to read ...

SKU: SF-BOB-12886

If you aren’t familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The SparkFun Electric Imp Breakout Board allows you to explore the capabilities of the Imp by providing standard...

SKU: SF-SEN-14348

The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality sensing needs with the popular CCS811 and BME280 ICs. This unique breakout provides a variety of environmental data, including barometric pressure, humidity, temperature, TVOCs and equivalent CO2 (o...

SKU: SF-SEN-22858

A combined air quality and environmental sensor breakout featuring the ENS160 (air quality index, eCO2, TVOCs) and BME280 (temperature, humidity, barometric pressure) on a single Qwiic-enabled board. The two sensors work together — the BME280 provides real-time humidity and temperature data that ...

SKU: SF-SEN-19096

The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The gas sensor on the BME688 can detect a wide variety of volatile organic compounds (...

SKU: SF-SEN-16466

A complete environmental sensor breakout based on the Bosch BME680, combining gas sensing (VOC), temperature, humidity, and barometric pressure in a compact 25.4 × 25.4mm (1" × 1") board. The gas sensor detects a wide variety of volatile organic compounds for indoor air quality monitoring. Commu...

SKU: SF-BOB-23589

The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering.The ESLOV to Qwiic Bridge includes one Qwiic connector and ...

SKU: SF-DEV-23386 · MPN: DEV-23386

Say hello to the next generation of Pro Mini boards - the SparkFun ESP32 Qwiic Pro Mini houses the powerful ESP32-PICO-MINI-N8R2 from Espressif on our compact Pro Mini footprint with 2MB of PSRAM. With two individually controllable CPU cores, adjustable CPU clock frequency, a co-processor that ca...

SKU: SF-DEV-13907

The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that it adds support for Bluetooth low-energy (i.e BLE, BT4.0, Bluetooth Smart), and...