All Products

SKU: SF-COM-16917 · MPN: COM-16917

Show numbers, letters, characters and symbols in bright blue with this compact four-character alphanumeric display. Each digit uses fourteen segments, giving you far more flexibility than a standard seven-segment display.It connects through the SparkFun Qwiic system, so setup is simple: plug in a...

SKU: SF-COM-16919 · MPN: COM-16919

Add bright pink letters, numbers and symbols to your project with this Qwiic alphanumeric display. Its fourteen-segment digits give you far more flexibility than a standard seven-segment display, making it useful for status readouts, short labels, timers and compact user interfaces.The board uses...

SKU: SF-COM-16916 · MPN: COM-16916

Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without soldering, without working out SDA and SCL by hand, and without adding separate vol...

SKU: SF-COM-18565 · MPN: COM-18565

This compact white alphanumeric display gives you fourteen-segment characters for showing numbers, letters and symbols in your project. It uses the VK16K33 LED driver over I2C, so it is a neat fit for Qwiic-based builds where you want readable text without lots of wiring.With Qwiic, you can plug ...

SKU: SF-PRT-15109

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and ...

SKU: SF-SEN-30480 · MPN: SEN-30480

This capacitive soil moisture breakout is designed for plant monitoring projects where exposed metal probes can corrode after time in the dirt. It measures moisture using a capacitive plate embedded in the board, managed by a CY8CMBR3102 Capsense® Express™ controller for improved durability in co...

SKU: SF-PRT-26851 · MPN: PRT-26851

Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The board uses a PCA9554 8-bit I2C I/O expander to read the momentary buttons, with ...

SKU: SF-PRT-14417

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector will mate with all of our Qwiic cables with a solid lock. The SparkFun Qwiic conn...

SKU: SF-PRT-16766

A surface-mount 4-pin JST connector in a vertical orientation, designed for the SparkFun Qwiic I2C ecosystem. This 1 mm pitch connector is used on all Qwiic-compatible boards and lets you build your own I2C devices that integrate seamlessly with the Qwiic system. The vertical mount profile is id...

SKU: SF-BOB-31206 · MPN: BOB-31206

Generate a real analogue output from your microcontroller instead of relying on PWM. This MCP4725 breakout is a 12-bit Digital-to-Analogue Converter (DAC) that outputs precise voltage levels over an I2C/Qwiic connection.It is useful for projects that need smoother control signals, such as sound g...

SKU: SF-WIG-21277 · MPN: WIG-21277

Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board has five Qwiic connectors in total. One connects back to your main board, leavin...

SKU: SF-LCD-29530 · MPN: LCD-29530

This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and data plotting.The display uses Chip-on-Glass (COG) OLED technology, so each pixe...

SKU: SF-COM-30416 · MPN: COM-30416

Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at 30VDC or 0.3A at 125VAC at 40°C.The board offers both software and hardware con...

SKU: SF-CAB-28768 · MPN: CAB-28768

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Gravity Adapter Cable allows interoperability between the SparkFun Qwiic Connect Syste...

SKU: SF-WIG-25860 · MPN: WIG-25860

This compact audio trigger board is a high-fidelity polyphonic WAV player for interactive installations, instruments, exhibits and embedded sound projects. It plays uncompressed 16-bit, 44.1kHz mono and stereo WAV files from a microSD card, with CD-quality audio and very low trigger-to-sound late...

SKU: DF-FIT0782

An M.2 Key-M to PCIe x4 extension cable designed for LattePanda Alpha and Delta single-board computers. This short 100 mm riser cable provides PCIe 3.0 x4 full-speed signal transmission (up to 32 Gbps), allowing you to connect PCIe expansion cards such as NVMe SSDs, network cards, capture cards, ...

SKU: WS-30661 · MPN: 30661

Unleash Your Imagination with RA4M1-Zero Mini Development BoardTransform your ideas into reality with the RA4M1-Zero Mini Development Board – a compact powerhouse designed for innovators, hobbyists, and professionals alike.  Key Features: - High-Speed Processing: At the heart of this mini de...

SKU: AF-1590

Have you gazed longingly at large TFT displays - you know what I'm talking about here, 4", 5" or 7" TFTs with up to 800x480 pixels. Then you look at your Arduino. You love your Arduino (you really do!) but there's no way it can control a display like that, one that requires 60Hz refresh and 4 ...

SKU: DF-FIT0775

Rack Tower stands for a new concept for the 4-layer acrylic case for the cluster.This 4-layer acrylic oversized fan enclosure is a new product designed to provide shell protection and cooling solutions for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, ...

SKU: AF-1178

Rollin' rollin' rollin', you can now roll around smooth as silk with these radial bearings. Often referred to as "skate bearings" They're good for supporting a rotating rod or as a wheel hub. However, these are higher quality, meant for continuous use so they'll last longer than cheap skateboard ...