All Products

SKU: SF-GPS-29204 · MPN: GPS-29204

This low profile ceramic chip antenna from Molex is designed for GPS applications where the antenna needs to be mounted directly on a PCB.It operates across 1.561GHz to 1.602GHz, with a 1.575GHz centre frequency, making it suitable for compact positioning and navigation designs.The antenna uses s...

SKU: SF-GPS-29203 · MPN: GPS-29203

This compact cube antenna from Molex is designed for GPS applications and surface mounting directly to a PCB. It covers a frequency range of 1.556GHz ~ 1.607GHz, making it suitable for embedded positioning projects where a low-profile board-mounted antenna is required.Electrical connectivity is v...

SKU: SF-GPS-15246

The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS, Galileo, BeiDou, and GLONASS in three different frequency bands (1561 +/-3MHz,...

SKU: SF-GPS-29206 · MPN: GPS-29206

This compact Molex molded GPS antenna is a surface-mount option for adding satellite reception to space-constrained PCB designs. It measures just 3 x 5 x 4mm and is designed for operation across a 1561 - 1602 MHz frequency range.The antenna is a monopole type made from LDS material, with a 4x6mm ...

SKU: AF-3922

A 200 mm Molex PicoBlade 2-pin cable with 1.25 mm pitch connectors. The ultra-slim PicoBlade format takes up minimal PCB space while providing a secure friction-lock connection — ideal when standard 0.1" or JST PH connectors are too large. Specifications Connector Type – Molex PicoBlade Pitch...

SKU: SF-COM-11996

A small, panel-mount momentary push button in black. This SPST normally-open switch is ideal for basic on/off functions in electronics projects, control panels, and prototypes. The threaded barrel mounts through a 6.75 mm panel hole, and small solder lugs make wiring straightforward. Key Featur...

SKU: SF-COM-11992

A compact red momentary push button designed for panel mounting. This SPST normally-open switch is ideal for basic on/off, reset, and trigger functions in electronic projects and enclosures. Specifications Type: SPST, normally open (N.O.), momentary Colour: Red Thread Diameter: 6.75mm Overa...

SKU: AF-5929 · MPN: ADA5929

MAJOR KEY ALERT 🔑🔑🔑 we now stock 'Key Lock Switches'! These mechanical switches don't use a button, a lever, or a magnet to open and close the contacts. Instead, a literal key is used. This low-cost but effective key lock switch is nice and compact: you only need to drill a 12mm / 0.5" diameter ...

SKU: SF-COM-09190

This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it ‘clicks’ really well). This button is great for user input on a PCB or a good, big reset button on a breadboard. Breadboard friendly!

SKU: AF-3606

The Mongoose OS Google IoT Core Pack is a complete starter kit for building IoT projects with Google Cloud, built around the Adafruit Feather HUZZAH32 (ESP32). Developed in collaboration with Google and Mongoose OS, this kit includes a pre-soldered ESP32 Feather board along with sensors, actuator...

SKU: MM-SKU00086

The MonkMakes Air Quality Kit for micro:bit is based around the MonkMakes Air Quality Sensor. This add-on for the BBC micro:bit measures the quality of the air in a room - how stale the air is. The outputs of the Air Quality Sensor board are analog: one for temperature and one for eCO2 (estimated...

SKU: MM-SKU0072

This board, designed for use with the Lets Talk Science Living Space Project, provides a CO2, temperature and Relative Humidity measurements to a BBC micro:bit.                        This board was designed by MonkMakes Ltd for use...

SKU: AF-5587

If you're like me and have trouble keeping your calatheas and pepperomias happy and not overwatering them to root rot ruin, why not take a gander at the Plant Monitor from Ada-friend Monk Makes. Its a super easy and friendly way to get started with sensing & gardening projects with no soldering r...

SKU: DF-DFR0648

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 33mm and the width is 20mm. With its small size, simple wiring and low power consumption, it can be applied to many display appl...

SKU: DF-DFR0647

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables, mini consoles, and space-constrained embedded projects where a small, clear dis...

SKU: DF-DFR0650

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low power consumption, it can be applied to many display applications, such as wearable ...

SKU: AF-326

This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excellent contrast, low power consumption, and crisp visuals even at this small size. ...

SKU: AF-931

A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast, self-illuminated output with no backlight required. The breakout board include...

SKU: AF-661

A compact 1″ diagonal OLED display with 128×32 white pixels driven by the SSD1306 controller. Each pixel is individually lit, delivering sharp, high-contrast graphics with no backlight needed — resulting in excellent readability and low power consumption. Communicates via SPI (4–5 pins required)...

SKU: AF-938

A crisp 1.3" monochrome OLED display with 128×64 white pixels, driven by the SSD1306 controller. Each pixel is individually addressable, and because OLEDs emit their own light, no backlight is needed — resulting in excellent contrast and readability in a compact form factor. The breakout board i...