Adafruit
Snap-on Enclosure for Raspberry Pi Pico / W / 2 / 2W
·
A custom-designed snap-together enclosure for the Raspberry Pi Pico, Pico W, Pico 2, and Pico 2 W. 3D printed using an SLA process in translucent milky white...
Get notified when back in stock
A custom-designed snap-together enclosure for the Raspberry Pi Pico, Pico W, Pico 2, and Pico 2 W. 3D printed using an SLA process in translucent milky white plastic, the case allows the power LED to shine through while providing a smooth, high-quality finish.
No screws or glue required — simply snap the Pico into the bottom piece and press the top cover into place. The design accommodates the Micro-USB connector and bootloader button, with venting through the top cover. Leave the cover off to connect accessories on top.
Key Features
- Snap-Together Design – No screws, glue, or tools required
- SLA 3D Printed – Translucent milky white plastic with smooth finish
- Full Port Access – Openings for Micro-USB and bootloader button
- Vented Top Cover – Heat dissipation through the top
- LED Visible – Translucent material lets the power LED shine through
Compatibility
- Raspberry Pi Pico
- Raspberry Pi Pico W
- Raspberry Pi Pico 2
- Raspberry Pi Pico 2 W
- Other Pico-compatible boards with matching button and USB connector placement
Package Contents
- 1× Snap-on enclosure (two plastic pieces: base + cover)
Find this product in
Related Tutorials
Free step-by-step guides
You might also like
Customers who bought this also bought
RP2350-GEEK Board with 1.14" Color LCD and USB Debugging
$22.65
Tiny 2350
$15.35
Bangle.js v2 - Hackable Javascript Smart Watch
$339.90
Gravity: MAX30102 Heart Rate and Oximeter Sensor
$38.15
Gravity: Arduino Heart Rate Monitor Sensor (ECG)
$34.70
Gravity: Heart Rate Monitor Sensor For Arduino
$27.90
Disposable ECG Electrodes Pack
$7.00
Jargon buster
Plain-language definitions for the technical terms in the product description.
- Bootloader
- Small starter software on a microcontroller that lets new code be uploaded before the main program runs. Knowing how to enter bootloader mode matters when you need to program the board or recover it after a faulty sketch.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.