Adafruit
Snap-on Enclosure for Raspberry Pi Pico / W / 2 / 2W
· MPN: ADA6252
A custom-designed snap-together enclosure for the Raspberry Pi Pico, Pico W, Pico 2, and Pico 2 W. 3D printed using an SLA process in translucent milky white...
A custom-designed snap-together enclosure for the Raspberry Pi Pico, Pico W, Pico 2, and Pico 2 W. 3D printed using an SLA process in translucent milky white plastic, the case allows the power LED to shine through while providing a smooth, high-quality finish.
No screws or glue required — simply snap the Pico into the bottom piece and press the top cover into place. The design accommodates the Micro-USB connector and bootloader button, with venting through the top cover. Leave the cover off to connect accessories on top.
Key Features
- Snap-Together Design – No screws, glue, or tools required
- SLA 3D Printed – Translucent milky white plastic with smooth finish
- Full Port Access – Openings for Micro-USB and bootloader button
- Vented Top Cover – Heat dissipation through the top
- LED Visible – Translucent material lets the power LED shine through
Compatibility
- Raspberry Pi Pico
- Raspberry Pi Pico W
- Raspberry Pi Pico 2
- Raspberry Pi Pico 2 W
- Other Pico-compatible boards with matching button and USB connector placement
Package Contents
- 1× Snap-on enclosure (two plastic pieces: base + cover)
Jargon buster
Plain-language definitions for the technical terms used above.
- Bootloader
- Small starter software on a microcontroller that lets new code be uploaded before the main program runs. Knowing how to enter bootloader mode matters when you need to program the board or recover it after a faulty sketch.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
Find this product in
