SparkFun
Raspberry Pi GPIO Shrouded Header - 2x20
A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable ...
A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or custom PCB without the risk of plugging in backwards.
The through-hole header has 40 pins on a standard 2.54 mm (0.1″) pitch and is compatible with all 40-pin Raspberry Pi models (Pi 2, 3, 4, 5, and Zero).
Key Features
- 2×20 Pin Layout – Matches the Raspberry Pi 40-pin GPIO header
- Shrouded & Keyed – Polarised connector prevents reverse insertion
- 2.54 mm (0.1″) Pitch – Standard breadboard and perfboard spacing
- Through-Hole – Solderable to custom PCBs and breakout boards
Ideal For
- Raspberry Pi breakout and prototyping boards
- Ribbon cable connections to GPIO
- Custom HAT and add-on board designs
Package Contents
- 1× 2×20 Shrouded Header
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout is a small circuit board that makes a tiny or hard-to-solder component easier to connect to with standard pins. It matters because this OLED module can be wired into a microcontroller project without needing to solder directly to the display’s fine contacts.
- GPIO
- General-purpose input/output pins are microcontroller pins you can set in software to read signals, switch devices on and off, or connect to peripherals. The number of GPIO pins matters because it limits how many buttons, LEDs, sensors, and other parts you can wire directly to the board.
- PCB
- A printed circuit board is a rigid board with copper tracks that connect electronic parts without loose wires. For this kit, the PCBs also form the airplane shape, so they are both the circuit base and part of the finished model.
- Polarised connector
- A connector shaped so it is intended to plug in only one way around. This helps prevent reversed wiring, which can stop a circuit from working or damage parts.
Find this product in
Brands
Raspberry Pi GPIO Shrouded Header Datasheet
Datasheet · 625.6 KB · Click any page to view full size
