ElecFreaks
PIR Motion Sensor Module:DYP-ME003 SEN005
A passive infrared (PIR) motion sensor module based on the BISS0001 IC, capable of detecting human movement at up to 7 metres. Outputs a digital high signal ...
Get notified when back in stock
A passive infrared (PIR) motion sensor module based on the BISS0001 IC, capable of detecting human movement at up to 7 metres. Outputs a digital high signal when motion is detected, making it easy to interface with Arduino, Raspberry Pi, and other microcontrollers.
Features adjustable sensitivity and delay time potentiometers, with a wide input voltage range of 4.5–20 V DC and ultra-low standby current of just 50 µA.
Key Features
- PIR Motion Detection – Detects human movement via infrared
- Wide Voltage Range – 4.5–20 V DC input
- Low Standby Current – 50 µA
- Adjustable Range – 3 m default, up to 7 m maximum
- Digital Output – High when motion detected, low when idle
Specifications
- IC: BISS0001
- Input Voltage: 4.5–20 V DC
- Static Current: 50 µA
- Trigger Mode: H (repeatable)
- Block Time: 2.5 s (default)
- Delay Time: 5 s (default)
- Detection Angle: <110°
- Detection Distance: 3 m default, 7 m max
- Lens Diameter: 23 mm
- Board Dimensions: 32 × 24 mm
Ideal For
- Motion-activated lighting and alarms
- Arduino and Raspberry Pi security projects
- Automatic door and appliance control
- Occupancy detection
Package Contents
- 1× DYP-ME003 PIR Motion Sensor Module
Jargon buster
Plain-language definitions for the technical terms used above.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Motion detection
- The ability to sense that something has moved, either by comparing successive camera frames or by using a dedicated sensor such as a PIR (infrared) or radar module. When a product lists motion detection, movement can be used as a trigger so a system only acts or records when there is activity rather than running continuously.
Find this product in
Sensors & Input
Related Tutorials
Free guides on learn.littlebird.com.au
