Pi Zero ENC28j60 Network Adapter Module for Raspberry Pi Zero

A compact Ethernet network adapter module for the Raspberry Pi Zero and Zero W, based on the ENC28J60 controller. It plugs directly onto the Pi Zero's GPIO header and provides a wired network connection for system updates, software installation, and network access.

Key Features

• ENC28J60 Ethernet Controller – Wired network connectivity via SPI
• Direct GPIO Connection – Plugs onto the Raspberry Pi Zero header
• DHCP Support – Works with standard routers for automatic IP assignment
• Simple Setup – Enable with a single line in config.txt

Specifications

• Compatibility – Raspberry Pi Zero, Raspberry Pi Zero W
• Dimensions – 65 × 30mm (2.5″ × 1.1″)
• Weight – 19g

Setup

1. Install the module onto the Raspberry Pi Zero GPIO header
2. Connect an Ethernet cable to your router (ensure DHCP is enabled)
3. Add dtoverlay=enc28j60 to /boot/config.txt
4. Save and reboot
5. Verify with ifconfig in a terminal

Package Contents

• 1× ENC28J60 Network Adapter Module