DFRobot
Mini Metal DC Geared Motor (6V 375RPM 0.5Kg*cm)
This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft...
Get notified when back in stock
This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is 375rpm and the noise is low.

- In order to protect the service life of the motor, do not overload it;
- Do not store and use it in high temperature or extreme humidity, which may affect the service life and effect of the motor;
- When soldering is required on the motor terminals of the positive and negative poles of the power supply, if the soldering iron temperature is between 340 °C ± 40 °C, the heating time should be within 3 seconds to prevent overheating deformation of the plastic parts in the motor;
- Do not let the motor shaft get stuck. If it is stuck, the motor will burn out;
- The motor should be used within the voltage specifications.
SPECIFICATION
- Voltage: 6V
- Direction of rotation: two-way
- Reduction ratio: 1:35
- No-load current: less than or equal to 90mA
- No-load speed: 375rpm
- Load torque: 91g.cm
- Load speed: 160rpm
- Load current: less than or equal to 200
- Stall torque: 0.5kg.cm
- Stall current: 950mA
- Shaft length: 10mm
- Shaft diameter: 3mm D-shaped shaft
- Weight: 25g
- Size: 12*13-R15.5*38mm (without motor output shaft)
Find this product in
Brands
Robotics & Motion
Supplier page — dfrobot.com
Supplier Description · 513.6 KB · Click any page to view full size
Related Tutorials
Free step-by-step guides
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Stall torque
- The maximum twisting force a servo can produce when its output is held still and cannot move. It helps you judge whether the servo is strong enough for a robot joint, steering linkage, or other load.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.