Store

DFRobot

$7.30 |
In stock at supplier
No reviews yet

The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity sensor ...

Estimated Delivery
Arrives
Disclaimer
View Markdown
Secure checkout

The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity sensor element. It features standard I2C interface and a wide voltage supply of 2V-5V. And with the simple peripheral circuit, it performs stably even in harsh environments in the measuring range of -40°C ~ +85°C.

This sensor can be widely used for measuring the environmental temperature and humidity of home electronic equipment, the temperature and humidity of automobiles, and so on.

Connection Diagram


Features
  • Digital output, I2C interface
  • Excellent long-term stability
  • Fast response, strong anti-interference, and adaptability
  • Gravity interface, simple wiring, no soldering required

  • Applications
  • HVAC
  • Dehumidifier
  • Testing Equipment
  • Consumer Appliances
  • Automobiles
  • Automatic Control
  • Data Loggers
  • Weather Control

  • Specification

    Module Parameters

  • Operating Voltage: DC2V-5V
  • Output Signal: I2C
  • I2C Address: 0x38
  • Dimension: 30mm×20.5mm/1.18×0.81"

  • AHT20 Chip Parameters

    Relative Humidity

  • Resolution: 0.024 %RH
  • Accuracy Error: ±2 %RH
  • Repeatability: ±0.1 %RH
  • Hysteresis: ±1 %RH
  • Non-linear: ±0.1 %RH
  • Response Time: 8S
  • Operating Range: 0~100 %RH
  • Long-term Drift: <0.5 %RH/yr

  • Temperature

  • Resolution: 0.01°C
  • Accuracy Error: ±0.3°C
  • Repeatability: ±0.1°C
  • Hysteresis: ±0.1°C
  • Response Time: minimum 5S, maximum 30S
  • Operating Range: -40°C~85°C
  • Long-term Drift: <0.04°C/yr

  • Documents
  • Product wiki
  • Dimensions
  • Circuit Diagram SCH
  • 2D Dimensions
  • 2D CAD_Dimensions
  • 3D STP

  • Shipping List
  • Gravity: AHT20 Temperature and Humidity Sensor × 1
  • Gravity-4P I2C/UART Sensor Cable × 1
  • Jargon buster

    Plain-language definitions for the technical terms used above.

    Gravity
    Gravity is DFRobot’s plug-in connector system for sensors, motors and modules, using standard cables to reduce loose jumper wiring. It matters because Gravity-compatible parts can connect directly to these ports, while non-Gravity parts may need adapters or manual wiring.
    I2C
    I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
    I2C address
    An I2C address is the number a device uses so a microcontroller can tell it apart from other devices on the same I2C bus. It matters because two devices with the same fixed address may conflict if used together.
    UART
    UART is a simple serial connection that sends data over separate transmit and receive wires, often labelled TX and RX. It matters because this module is designed to replace a wired UART cable with a wireless link while keeping the same serial data format.

    Supplier page — dfrobot.com

    Supplier Description · 681.6 KB · Click any page to view full size

    Download PDF
    Stella
    Stella Expert

    Ask me anything about this product

    Maddy, co-founder of Little Bird

    Need help? We're here for you!

    Hi, I'm Maddy. My team and I are ready to help with your order or any questions.